Used Machine Brokers for sale (65,711)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W Ksdpfx Aew A H T Ash Esdt X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 2202 - 11141, Deckel FP 2 M with 3-axis digital Heidenhain ND 780 control Original condition, not repainted Stepless feed rate + rapid traverse Spindle speeds: 25 - 2500 Travel distances: X 400 Y 220 Z Drilling spindle, horizontal + vertical, SK 40 Central lubrication, manual Kdodpfx Ajz Ayzkeh Eet Weight: approx. 1400 kg Electrically monitored chip guard, 2 x emergency stop for compliance with CE standards Machine vice, collet set, 6 tool holders SK 40, machine feet, lighting. Condition very good, smooth operation at all spindle speeds and flawless guides. Can of course be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 min. module 1 Kdsdpfez Drcajx Ah Est total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm Kdjdpfx Aez Az Uvsh Est - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 54,484 h, machine/vehicle number: 048, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 16,175 h, laser power: 3,500 W, table length: 3,000 mm, type of cooling: water, overall weight: 8,300 kg, total width: 1,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, To sell used Amada laser cutting machine in continious operation. Located in Poland, Bykow. LCG3015LST Laser cutting: 16175 h Kdedpfxjz Di E So Ah Eet Machine operating: 30437 h Machine on: 55747 Machine in operation, maintenence records availible. Availible now.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5911143, Equipment: safety light barrier, For sale is an absolutely reliable and immediately operational Polar Mohr 92 EM-Monitor high-speed cutter from 1989 (serial number: 5911143). The machine is in very good, well-maintained condition and has been operating flawlessly until recently. Technical data & highlights: Model: Polar 92 EM-Monitor with digital program display Cutting width: 920 mm Application: Ideal for professional printing companies, digital printing, and post-processing (B2 format) Condition & scope of delivery: Safety: The optical light barrier (light curtain) functions perfectly and meets UVV safety requirements. Table: Chrome-plated air table in flawless condition (blower operates powerfully). Kdjdpfxez Ahrqj Ah Est Blade: 1 machine blade mounted + 1 additional spare blade (newly sharpened) included in the delivery. Accessories: Complete with original blade changing tool, tool set, and complete documentation / operating manual.

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Ksdpez Dttgefx Ah Eedt Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 270 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, Brand: Thiel Model: Duplex 159 3-axis coordinate display Kedpez Dt Htsfx Ah Esdt Travel: X 500mm, Y 300mm, Z 400mm ISO 40 Speeds: 40 - 2000 rpm Table: 800x270mm Includes an accessory for additional table tilting. Includes all the tools shown in the photographs. Includes a vise with a rotating base. Features safety guards in compliance with CE standards.

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Kodez Ducvjpfx Ah Ejdt Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: used, Year of construction: 1999, functionality: fully functional, Eima Type 122 double-blade panel saw Minimum/maximum cutting width: 210-2565 mm Cutting depth: 2500 mm Maximum blade diameter: 400 mm Cutting height: ~100 mm Cutting unit can be tilted from 90° to 45° Motor power: 2 x 4.4 kW Total power consumption: 10 kW Kodpjz Duppefx Ah Esdt Electronic control for cutting width adjustment Technical documentation and CE certificate included

Condition: used, Year of construction: 2010, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, We offer this used Werth Easyscope 300x200x200/VID/TP 3D CNC coordinate measuring machine, manufactured in 2010. Type: Easyscope 300x200x200/VID/TP 3D CNC Year of manufacture: 2010 Voltage: 230 V AC Current: max. 10 A Frequency: 50 Hz Serial number: 10-00012 Measuring range as indicated: 300 × 200 × 200 mm Kdsdez Ditvepfx Ah Eot Control: CNC Measurement: 3D System: vision system + measuring probe Measuring table: glass Manual control: panel with joystick Connectors visible on the device: Video / Motor / Scale / Probe Safety / emergency switch Control computer visible in the pictures The machine can be used in quality control, tool rooms, metrology departments, measuring laboratories, and for the inspection of precision manufactured parts. Inspection of the device is possible by prior arrangement. The device has been used sparingly and has not been calibrated since 2029. If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 1980, - Table size: 1250x350 mm - Travels X / Y / Z: 850 x 250 x 470 mm - Spindle mount: ISO40 - Spindle speeds: 45-2000 rpm. / à 24 steps - Horizontal and vertical spindle in the same milling head - Swiveling in the head: +/- 90 ° - Gear bar displaceable (Y axis) Ksdsdux Hgjpfx Ah Esdt - digital display Heidenhain (3 axes) - Coolant pump - div. on accessories - Weight: about 2150 kg - Space required: approx. 1900 x 2000 x 1700 mm

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: - Longitudinal with motor / Manual table: 290mm / 300mm Kdjdpfxjz Dtw Ss Ah Ejt - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm Kdodez Akqvepfx Ah Ejt - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Condition: used, Year of construction: 1962, serial number 813 stroke 160 mm Kodpfx Ahjz Alc Hj Eodt automatic feeds ja cross-moving table 2-Achsen weight of the machine ca. 1,2 t

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Kodoz Ahxqopfx Ah Eodt Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. Ksdpfx Ahjz A Aa Ho Esdt The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Kdsdpoywg Rdefx Ah Ejt Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: used, Year of construction: 2015, machine/vehicle number: 136666-100, overall weight: 4,600 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 120/525 Unilog B6P, will be auctioned online as part of our industrial auction / machine auction – business liquidation of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vises, tool holders, and much more. You will find this and many other items on our platform. Kedpezy H Edefx Ah Eodt

Condition: used, Year of construction: 2018, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for printing companies that need to switch flexibly between rigid sheet materials and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine color gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color space: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Ksdoz Dr T Sopfx Ah Ejdt Year of manufacture: [2018] Condition: Technically and optically in good condition. The machine operated exclusively in a single-shift operation and was regularly maintained. Availability: Available from [immediately] or by arrangement. Location: [83410 Laufen D] Scope of supply: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). Inspection and print tests on site are possible by prior appointment. More pictures or information available on request.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. Kjdpfxoz A Azqe Ah Eodt A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Kdsdpezxnmysfx Ah Est Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Kdedpfezdc Iqjx Ah Eet Also has 2 forming stations, Bf and Cf. Always used for thin sheet metal, max. 2 mm. A tapping head TU6 is included, but it displays an error message. Must be sold urgently due to a lack of space.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 80753, total height: 2,300 mm, total width: 1,750 mm, total length: 2,500 mm, overall weight: 4,700 kg, Equipment: documentation/manual, Offered for sale is a universal tool milling machine, MAHO Type MH 800 P, with digital display and linear control system HEIDENHAIN TNC 121. Year of manufacture: 1980 Travel distances X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z-axis: 10-500 mm/min, infinitely variable Feed rate Y-axis: 5-250 mm/min, infinitely variable Rapid traverse X, Z-axis: 1.4 m/min Kdedpfx Ahoztkbce Eet Rapid traverse Y-axis: 0.7 m/min Arbor displacement, vertical: 100 mm Arbor feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Arbor displacement, horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 volts, 50 Hz, 10 kW - Swiveling control panel - Central lubrication - Operating manual Machine dimensions L x W x H: 2.5 x 1.75 x 2.3 m Weight: approx. 4,700 kg

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° Kdjdjz Akgwepfx Ah Eet - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.