Used Lumber Circular Saw for sale (5,953)

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 Kdodjr Elmwjpfx Ah Nog With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Drive power: 5.5 kW Saw blade diameter: 500 mm 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available - Kdodjxiv Dhepfx Ah Njg

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm Kjdpfxsw D T Dke Ah Nedg T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor Kjdomb U Tujpfx Ah Nsdg • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up Kedpfx Ahsmb U Tfj Nodg • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 12 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Kdsdpjmcct Aofx Ah Nsg Length: 12 m Linear Unit: ProfiStop Omicron Material Length: 1123 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture Kedpsmb U Tbjfx Ah Nsdg • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light Kdedpfx Aomb U T Hsh Neg • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation Kdedpsmcaahsfx Ah Njg • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation Kodpfemb U T Rex Ah Nsdg • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Kdedemb U T Uepfx Ah Njg

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. Ksdpomcaawofx Ah Nsdg • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Kedpfx Ahjxlcaue Nedg Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: used, functionality: fully functional, cutting length (max.): 2,800 mm, SECOND-HAND CIRCULAR SAW ROBLAND MOD. E3100 Kdjdpfx Ahex Rvkms Nog

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm * Kjdpjwvbk Aefx Ah Nedg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AB/203002, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 - Year 2010 (CE) Kdedpfx Ahex Runqo Nsg

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Kedpfx Asx Rugtoh Nsdg Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Kdodsxqtvqspfx Ah Njg

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood Kdjdotuurtjpfx Ah Njg - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Ksdpex Nr Sqsfx Ah Nsdg Feed adapter for URB 290/400. Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: used, functionality: fully functional, Year of construction: 2012, ADIGE CM 601 AUTOMATIC CIRCULAR SAW MAKE ADIGE, MADE IN ITALY MODEL CM 601 YEAR 2012 CONTROL ADIGE / SIEMENS MAX. CUTTING CAPACITY 12 – 202.0 mm MAX. CUTTING LENGTH 400.0 mm BAR LENGTH 6500.0 mm SAW MOTOR 7.5 kW PLUS Kodsx Nnakopfx Ah Nodg PART WEIGHING SCALE PARTS CONVEYOR BAR FEED

Condition: new, Year of construction: 2005, Carriage length: 1500 mm Cutting width at rip fence: 700 mm Kjdpfexrbh Rsx Ah Njdg Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees Kedpfxeuiy Nyj Ah Njdg

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has Kodpfx Ahjuiy Rqj Njdg - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Kedpfx Ajwn D Izeh Nsdg Professionally dismantled and loaded onto truck, free of charge.