Used Log Bandsaw for sale (2,387)

Condition: good (used), Year of construction: 2016, Year 2016 Description Product Length: Minimum: 180 mm (7.09") Maximum: 500 mm (19.70") Product Width: Minimum: 145 mm (5.71") Maximum: 320 mm (12.60") Compressed Log Length: Minimum: 700 mm (27.56") Maximum: 1,200 mm (47.24") Maximum Log Weight: 170 kg (375 lbs) Cycle Time: 17 seconds (product dependent) Palletizing Height: Bottom edge of log: 100 mm (3.93") Top edge of log: 1,500 mm (59.06") Pick-Up Height: 900 mm (35.43") Electrical Supply: 400 V 3 Phase (3~) N + PE 50/60 Hz Installed Power: 1.6 kW Compressed Air Requirement: 65 l/min at 6 bar (87 psi) Cedpezqrdtsfx Albjrg Maximum of 4 cycles per minute Hose connection: Ø 13 mm Machine Weight: 1,300 kg (2,870 lbs)

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2026, Equipment: ABS, 3-axle timber transport semi-trailer * 8x OptiPa bolster beams * 16x OptiPa aluminum side posts, one-piece * Sturdy aluminum front bulkhead, approx. 2500 mm high * Maximum saddle load approx. 12,000 kg Csdpfx Aei Rtgqolbsrg * Front overhang (kingpin to front edge of the kingpin plate) 1550 mm * Air suspension with 3x 9-ton axles from SAF * Axle reinforcement for off-road use * Axle lift for the first axle, automatic function, with start-up assistance * Weighbridge * Technically possible total weight 39,000 kg * WABCO Smart-Board * EBS braking system * All lines are protected and routed inside the longitudinal beams * Smooth sheet metal covering 3 mm, welded between the longitudinal beams * Tires: 6x brand-name tires, size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tubes, mounted as high as permissible * Shunting coupling at the rear * Ten welded ring elements for lashing, per side * 2x toolboxes approx. 600x400x400, plastic * Side impact protection, aluminum, anodized * KTL coating with zinc phosphating, highest level of corrosion protection Also available for short-term rental. Further information upon request.

Condition: used, Debarking plant with drum debarker and disc chipper. Credsw N Rxbspfx Albog Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 650 mm, control type: manual, actuation type: electric, total height: 1,800 mm, total length: 2,820 mm, total width: 2,550 mm, Equipment: CE marking, documentation/manual, motor brake, For sale is a professional HEMA HTR 600 horizontal bandsaw, manufactured in 2004. The machine comes from the original owner, a bookbinding company, and was used there exclusively for the precise cutting of copper plates. Accordingly, it is in very good and well-maintained condition. Thanks to the integrated conveyor belt, the HEMA HTR 600 is ideally suited for continuous operation and precise cutting of various materials. Technical data: Manufacturer: HEMA Model: HTR 600 Year of manufacture: 2004 Wheel diameter: 600 mm Max. cutting height: 140 mm (distance between conveyor belt and saw blade) Conveyor belt width: 650 mm Conveyor belt speed: 0.5 to 5 m/min (continuously variable) Cutting speed: 1,640 m/min Cjdpjzqak Ujfx Albjrg Saw blade dimensions: Length max. 5,600 mm | Width 8 to 25 mm | Thickness max. 0.65 mm Dust extraction connections: 3x Ø 100 mm (cutting point, deflection point, conveyor belt) Saw motor power: 2.2 kW Feed motor power: 0.12 kW Electrical connection: 400 V / 3 phase / 25 A fuse Working height: 955 mm Dimensions (L x W x H): approx. 2,820 mm x 2,550 mm x 1,800 mm Weight: approx. 700 kg Condition & Notes: Previous application: Bookbinding (copper processing) The machine is fully functional and ready for immediate use. Self-collection or shipping via freight forwarder is possible (costs are borne by the buyer). If you are interested or have any questions, please do not hesitate to contact us!

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) The grapple has an opening width of approx. 1.2m. The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Crjdpevygigjfx Albsg Individual adjustment is also possible. Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. We look forward to hearing from you! Your H&R GmbH

Condition: good (used), Log sorting crane, sorting carriage, Wolf RSZ 300/12.5 Year of manufacture: 1979 with Jonsereds crane, type: LONG-JON with cut-off saw with length-measuring device with grab Crodpfx Ajg T S E Telbsg with rails with cable The machine was in operation until the end and is in good working order; the cylinder of the grab needs to be re-sealed. Location: Germany, near Passau Please also check my other listings. I look forward to your inquiry.

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Crsdpfx Alezr I T Hsbog Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. Crsdpfot Irffjx Albog • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm Crsdpfx Asfwl Uaelbsg weight 700 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm Crodpfx Aljt Hf T Hsbjg TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system Codpfx Alew H Rq Hoborg - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, SALE – 5% OFF CNC COLUMN TYPE METAL BANDSAW M2-330C The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability Credpszd T H Asfx Albjg • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: used, mileage: 159,000 km, power: 382 kW (519.37 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 33.520 – TAJFUN WOOD CRANE – STEEL PLATFORM BODY ----VEHICLE HISTORY * FROM 1ST OWNER * NO MAINTENANCE BACKLOG * FULL MAN MAINTENANCE CONTRACT * WARRANTY THROUGH MAINTENANCE CONTRACT ----THE TRAILER IS NOT INCLUDED IN THE OFFER!----MAN TGS 33.520 6x4 BL Chassis * Engine: MAN D2676 LFAX, 382 kW (520 hp), Euro 6 * Transmission: MAN TipMatic 12.28 OD with Intarder 35 * Axle Configuration: 6x4, front axle steered, rear axles driven * Wheelbase: 4,500 mm * Permissible Total Weight: 33,000 kg * Technically Permissible Gross Vehicle Weight: 44,000 kg Crane Tajfun LIV 10, reach approx. 11 m * Knuckle angle 110° * Lifting cylinder with check valve * Outrigger beams * 4 hand levers and 2 foot pedals * 4 LED work lights * Start-Stop function * Various options and attachments according to the equipment list Superstructure Pavic Optipa steel platform body, loading length approx. 6,800 mm * Outer width approx. 2,550 mm * Steel subframe, welded and bolted * Aluminum cover in the middle * Outer cover made of smooth aluminum or non-slip sheet * Steel front wall, height approx. 2,500 mm Crodsyhz Alspfx Albjg * 4 Optipa SL steel loading platforms * Clamping attachment on the Optipa system Additional equipment Superstructure Lockable toolbox on the right * 2 Optipa ladder boxes * Elevated lighting carrier at the rear * LED work lights at the rear, side and rear Chassis / Frame / Technology Main frame with 9.5 mm longitudinal members * Lateral and rear underrun protection * Frame overhang at the rear 2,500 mm * Air intake * Exhaust routing upwards to the right * Lateral silencer on the right * 2 AGM batteries 12 V / 210 Ah * Generator 28 V / 120 A * Fuel tank on the right 390 l * Additional tank on the left 80 l * AdBlue tank on the left 80 l * Heated air dryer * EBS with ESP and ASR * Disc brakes front axle * Drum brakes rear axles Drive / Suspension MAN EasyStart * Retarder * Differential locks * Leaf / air suspension * Stabilizers front and rear * 2-circuit lighting system Trailer / Interfaces Rockinger trailer coupling on the rear cross member * Duomatic coupling * 2-line trailer brake connection * Interfaces for power supply and data exchange of the superstructure Cab TM cab, medium height Comfort * Spoiler package * Electric windows * Central locking with remote control * Door extensions driver and passenger side * Stationary heater * Climatronic air conditioning * LED main headlights * LED daytime running lights * Fog lights * 2 LED work lights on the roof * LED tail lights * Reversing warning system * Preparation for 2 rotating beacons * Electrically adjustable and heated main mirrors * Heated wide-angle mirrors * Preparation for reversing camera including wiring Interior / Comfort Comfort seats in fabric * Air-sprung driver's seat with lumbar support * Unsprung passenger seat * Armrests * Leather multi-function steering wheel * Digital 12.3" instrument cluster * MAN Tacho 2 * 2 sockets 12/24 V * 2 USB connections (5 V) * Sun blinds front and side * Bunk with 110 mm mattress * Pull-out refrigerator * Numerous interior and exterior storage compartments Driver Assistance Systems ESP * ASR * Cruise control with speed limiter * Emergency braking assistant (EBA, not switchable) * Lane departure warning system (LDW, not switchable) * AttentionGuard driver attention warning * No turning assistant * Preparation for reversing camera, no camera included as standard Infotainment MAN SmartSelect with touchscreen and rotary control * MAN Media System Professional N

Condition: used, Diameter 70 log saw Cedpjft Huyjfx Albjrg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg Crodjuph Uxopfx Albeg

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. Cedpfeupiapsx Alborg The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6.34, Year of construction: 2023, Like-new logging trailer with crane, suitable for tractors with an engine output of 70 hp or more. The trailer features overrun brakes and can be operated at speeds of up to 25 km/h without requiring registration. Crjdpfx Aljzrhvzobog

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min Crsdew I Scfjpfx Albjg - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min Crjdpfx Alogin Ndsbog - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: ready for operation (used), Log intake with debarker. Below parts included: - Log deck with steep-feeder - In-feed conveyor Codpfx Aezrdn Holbjrg - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker - Conveyor for bark

Condition: used, Year of construction: 1996, cutting diameter 460 mm Crsdozmy S Rspfx Albsg saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1996) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 6319 101 004 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Credpfx Alszmy Sqobjg Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, mileage: 227,941 km, power: 375 kW (509.86 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Currently equipped with: Rockinger AHK safety package "Light and Visibility Plus", Retarder Eco Cool, hill start assist (MAN Easy Start), LED lighting, gear function "rocking mode", differential lock on rear axle, high beam assistant, automatic headlight control with light sensor, 2x rotating beacon lights, preparation for rear-view camera, 2 kg fire extinguisher, MAN AttentionGuard, navigation system with map for Europe and Russia, MAN Advanced sound system with subwoofer, ROCKINGER GSS platform trailer with 8 x ExTe stakes, Palfinger crane Epsilon M12Z91 with operator platform "Classic", control system 4+2 with hydraulic pre-selection, biodegradable oil, double extension boom with 9.10 m reach, YFG53 - Epsilon timber grapple 0.50 m², load capacity: 3510 kg. Crsdpfsurd Nqox Albsg

Condition: used, mileage: 272,974 km, power: 375 kW (509.86 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, New ZF transmission + new clutch (installed 10/22 at 228,014 km). Short log biofuel. Hydrodrive front axle, steered and liftable rear axle, active roll stabilization, axle load scale for rear axle + trailer, parking brake on the front axle, display for trailer data, radio, MAN telematics, battery main switch, 12/24V sockets, LGS IV, 1 fire extinguisher 2 kg, LED daytime running lights, snow chain holder, RIO box, MAN Media 7" color display radio with navigation SD card for all of Europe, hands-free system for 2 mobile phones, AUX-in/USB, Alucar short log body with 4 outrigger supports, 6850 mm loading length, Epsilon M12ZMaster 91 crane with Masterdrive, cross-lever control (excavator control), hydraulically pre-controlled, double boom extension, 9.10 m reach, wide support base RX 47 (4.70 m), biofuel, toolbox, snow chain holder, 4 x LED spotlights. Codpfxezhzhps Albjrg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump Crsdpega Tzqjfx Albog * Base cabinet * Quick-release clamp * M42 Bi-metal saw band