Used Lipco Rotary Harrow for sale (3,668)

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted Chsdpfx Asu N D Rqjb Tef - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. Csdpfx Aexabm Neb Tshf - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. Cjdpextu Efjfx Ab Tehf The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Feel free to contact us for a non-binding offer.

Year of construction: 2013, condition: good (used), 813 USED Bakery rotary trolley oven 58x78 or 58x98 Koenig Passat OH. We have 3 such ovens. EXTERNAL DIMENSIONS OF THE OVEN (in cm): Chsdstrtycjpfx Ab Tsf - width 120 - length 175 + hood 66 - height 252 + exhaust fan 25 EQUIPMENT: - gas burner - 2 trolleys 58x78 We still have about 50 trolleys for these ovens at a price of 150 EUR each. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Csdpfjxtmp Nex Ab Tohf

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min Chodpfx Absxpggyo Tef • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t Chodpfxou N D Szs Ab Tef table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: excellent (used), 1 x Planet Fabrications Limited stainless steel lazy susan / rotary packing table.  Technical specification  ⚙️ Chsdpfx Ajw H Dc Njb Tsf ✅ Manufacturer - Planet Fabrications Limited ✅ Diameter - 1240mm.  ✅ Height - 760mm.  ✅ Single speed.  ✅ Electric supply - 3 phase. General information ℹ️ This stainless steel rotary packing table from Planet Fabrications Limited is a simple yet highly effective solution for streamlining your packing and assembly processes. Also known as a "lazy Susan," this robust machine is a workhorse in food production, warehousing, and other manufacturing environments.

Condition: used, functionality: fully functional, rotary table diameter: 2,000 mm, Table size: Ø2000 mm. Size (L x W x H): 2000 x 1500 x 2200 mm. Weight: 1200 kg. Csdpfxjxtaazo Ab Tshf With variable speed. 25° manual tilt Vertical welding table for rings, flanges and light work pieces.

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 Cedpfxokwb Dio Ab Tjhf The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), 723 USED Italian trolley oven, rotary BakeOff for 60x80 trays. EXTERNAL DIMENSIONS (in cm): - W:165, - L: 221, - H: 260. EQUIPMENT: - 2 trolleys: 60x80 - gas/oil burner Csdpfx Aberqiipj Tehf The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control Csdpfoxrdb Hjx Ab Tehf One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm Cjdpfeu Nkpmox Ab Tjhf - c=12mm *

Condition: excellent (used), REF: MM6190 Chodpfx Aboxf D Rbs Tsf 1 x Lazy susan / rotary packing table with poly-top and on height-adjustable feet. Technical specification ⚙️ ✅ Diameter - 1500mm.  ✅ Fixed speed.  ✅ Electrical requirements - 1 phase.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, rotary lobe pump, mono pump, dosing pump, high-pressure pump, screw pump, eccentric screw pump, hopper pump, eccentric spindle pump -Manufacturer: Blackmer, rotary piston pump type MC-1251_ATX-ST-CVT-1/2B SP-SI/1P-S/D-C100 -Motor: HEW 0.37 kW / 1350 rpm explosion-proof -Gearbox: North 408 rpm Cedpexm Rmlsfx Ab Tjhf -Flow rate: m³/h -Delivery head: m -Pipe connection: see photos -Dimensions: 720/230/H200 mm -Weight: 38 kg.

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day Cjdokv Uq Iopfx Ab Tehf The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Novapac cup filling and sealing machine, type: RM 150, machine number: 25 178, year of construction: 2005, 400 V, 50 Hz, denester: 85 mm x 85 mm, dyes: (2x) 72 mm x 72 mm, plastic belt, belt width: (2x) 100 mm, total dimensions: 2400 mm x 2350 mm x 2370 mm. S/s switch cabinet, dimensions: 1000 mm x 400 mm x 2150 mm, s/s control panel, dimensions: 800 mm x 350 mm x 800 mm. Chsdpjxl Tx Ujfx Ab Tof

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3537961, overall weight: 500 kg, total length: 172 mm, total width: 124 mm, total height: 96 mm, input voltage: 230,460 V, input frequency: 60 Hz, Our company bought this machine new, and it has been stored in perfect condition for a year. We do not need the machine, and thus are selling it. Codpfexqphcex Ab Tehf

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm Chedpfx Abeu N D Sbe Tsf table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Compact electric rotary oven Sveba-Dahlen with rotary platform, suitable for bakeries with limited space. Touch control panel with Sveba-Dahlen system Dual fans for even airflow Powerful heat exchanger - fast heating with low consumption Strong overlapping insulation - effectively prevents heat leakage Chodpfx Abotltr Nj Tef Stainless steel exterior and interior - keeps the surface temperature low and makes cleaning easier Strongly constructed stainless steel hood for efficient collection of fumes when the door is opened Parameters Sheet size: 600 x 800 mm Outer dimensions of the oven (w x h): 1450 x 1333 x 2445 Heating: electricity (60kW) Number of trolleys: 3 pcs Trolley dimensions (w, h, h): 675 x 825 x 1795 mm Oven is in very good condition. Used only 5 years in small bakery.

Condition: good (used), Year of construction: 1985, table diameter: 1,600 mm, rotary table diameter: 1,600 mm, 2x spindles (motors) for shaping Ijbexqhcxsiafky Ueii 2x sanding devices Table diameter 1600 mm Cedoxqhcxjpfx Ab Tjhf

Condition: refurbished (used), functionality: fully functional, load capacity: 8,000 kg, table height: 1,170 mm, table width: 1,700 mm, overall weight: 8,800 kg, Equipment: documentation/manual, Extremely compact rotary tilting table by PASSERINI with a 12.5 t load capacity. Refurbished machine (new electrical system including control cabinet, mechanics overhauled, newly painted). Complete and up-to-date documentation in German with EU Declaration of Conformity. The special feature of this machine is its very low overall height (faceplate height in horizontal position only 1,170 mm) and the far-rearward center of gravity. This allows for a very short design of the front outriggers, which on standard rotary tilting tables are often longer, thereby restricting access to the component and posing a tripping hazard. Cedpfxexqg D Is Ab Tjhf Please note when comparing offers that we can also ensure long-term service and spare parts availability for the used machines we offer. This machine can also be rented prior to purchase. We offer attractive financing models (independent of banks). We are also happy to handle transportation for you.

Year of construction: 2019, condition: like new (used), functionality: fully functional, AUTOMATIC PACKAGING MACHINE FOR PRODUCTION RATES UP TO 4000 PACKS/HOUR whit a cup diameter of 60 mm. Year of construction 2019 Intermittent rotary unit with 8 stations for container movement. · Destacking system for rigid, stackable containers. · Dosing head for liquid, viscous, solid or powder products. · Lift system for containers to allow filling from the bottom of the container. Csdpfxsxl Tpae Ab Tjhf · Hopper for feeding product. · Anti-dripping nozzle. · Destacking system for pre-cut aluminium lids. · Heat sealing removable system for container and lid, for easy cleaning and maintenance. · System for extracting the container from the rotary unit. · Powered conveyor for extracting the container from inside the machine.

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Chodpou N D S Usfx Ab Tjf Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: Codpfeu N Ebdex Ab Tshf table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *