Used Liebherr R 964 for sale (249)

Condition: used, functionality: fully functional, color: yellow, overall weight: 25,000 kg, Year of construction: 2014, Liebherr L 576 wheel loader, year: 2014, total weight 25t, used condition Isdpfx Asw S I Dtodnea

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine Iodpfx Adow R Tykjnsa -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm -Max. cutter diameter: 186 mm -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes.

Condition: used, functionality: fully functional, power: 76 kW (103.33 HP), fuel type: diesel, overall weight: 11,700 kg, empty load weight: 10,100 kg, Year of construction: 2018, machine/vehicle number: VATZ1655AZB049190*, Operating hours: 7,348 h last inspection at 6,863 h (Mar 23) Isdpfx Aowbgmgsdnsa last oil change at 7,080 h (Oct 24) maximum speed: 25 km/h front axle load: 6,800 kg rear axle load: 7,200 kg Place of use: paper industry (loading trucks/paper presses) An inspection can be arranged by appointment. We accept no liability for technical data or potential errors.

Year of construction: 1999, condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Iedovpviuspfx Adnoa

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Equipment: hydraulics, We offer a hydraulic cylinder for the high-tip bucket of our sold wheel loader. Isdpfx Aswpffqednoa Dimensions: Eye diameter: 70 mm Length retracted eye center to eye center: 860 mm Length extended eye center to eye center: 1240 mm Stroke: 390 mm

Condition: new, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Liebherr Likufix SW33 Adapter Plate / NEW / in stock & immediately available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is equipped with 4 connections - Also available from stock with a connector for the leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grapples, and the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 Ijdpjw N Aa Defx Adnsa - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products also in stock and immediately available! Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Mr. Herden will gladly assist you (by phone). Upon request, we will also be happy to provide you with a financing offer. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted!

Condition: good (used), Quick coupler system: Yes Technical condition: good Isdpfx Aet Dlvisdnja Visual appearance: good Please contact Ferdinand Pater for more information

Condition: excellent (used), Year of construction: 2018, Field of application: Construction Bucket capacity: 5 m³ Technical condition: very good Visual appearance: very good Serial number: Eurosteel Delivery terms: EXW Please contact Christiaan Dekker for more information 5 cubic meter bucket • Make: Eurosteel , Dutch build • 5 teeth • Pin diameter: 120mm • Between ears: 600mm Isdpju U N Ddjfx Adnoa • Bucket comes from Liebherr 964C Price Euro. 5.500,-

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm Ijdpfxet Hwrus Adnoa stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: ready for operation (used), Year of construction: 1995, A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible. Isdpfx Adjuzlgwensa

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), overall weight: 36,000 kg, fuel type: diesel, color: yellow, axle configuration: 3 axles, gearing type: automatic, emission class: euro3, first registration: 06/2003, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 Iodpfew H Hwvox Adnea - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours - carrier chassis - 18,883 operating hours - superstructure/upper crane - 53,857 km mileage - 4 x hydraulic extensions - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED rotating beacons - TÜV due: - General inspection (SP) due: 01/2026 - Tyres: 445/95 R 25 Subject to errors and prior sale. Internal vehicle number: 11218

Condition: new, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you by phone. Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW48 adapter plate is equipped with 4 hydraulic connections - Also available from stock with a plug for the drain line! Additional charge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Iedpfx Ajw N Aawednea Suitable for many attachments such as hydraulic breakers, sorting grabs, and the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (drain line required) - Westtech CS580 (drain line required) - Westtech CS780 (drain line required) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All suitable Westtech products also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) available from stock and ready for immediate delivery. Mr. Herden (phone) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. All information subject to change and prior sale.

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Ijdpfetr Nuqex Adnea Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm max. module: 5 min. module: 1 weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,84 x 2,8 m min. number of teeth: 7 toolpiece turning speed range: 4000-10000 U/min tool length: 210 mm With tail stock No dressing device Only CBN Ijdpfxewv Ug Rs Adnja *

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Ijdpfot Hw R Dex Adnea Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), HYDRAULIC CYLINDERS 7.26m STROKE (2PIECES) Ijdpsdkq Ewofx Adnoa AND BIG VARIATE OF OTHER HYDRAULIC CYLINDERS

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Iedjv E R Eiepfx Adnoa Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Year of construction: 2017, operating hours: 6,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information LIEBHERR HS 8100 Year of man.: 2017 Current hours: 6430 Boom: 2x6m 1x3m More details on require! Isdpfoh Tyz Usx Adnea

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2024, We offer a choice of natural gas or biogas engines from the manufacturer Liebherr. Iedpfxstpw Ece Adnoa Type G9512 Standard scope of delivery -starter -Cylinder heads -Exhaust manifolds and elbows -Turbocharger -Intercooler -Control valve (without actuator) -without gas mixer -without engine control and ignition system -without charge air line The engines are equipped with the following sensors: -single cylinder temperature monitoring -engine oil temperature sensor -engine oil pressure sensor -RPM sensor (2 pieces) -ignition signal transmitter -Mixture temperature sensor -mixture pressure sensor -Coolant temperature sensor -coolant pressure sensor

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Iodpfet Hwu Asx Adnoa Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Year of construction: 2014, operating hours: 7,950 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine LIEBHERR 505 kW Rotary Head BAT 510 Prepared for oscillator Iodpfjh Ty Agsx Adnsa Good working condition immediately available

Year of construction: 2006, operating hours: 13,700 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Ijdpeh Ty Aksfx Adnea LIEBHERR LRB 155 + Juntan Hammer HHK 5/7 More details on serious require, current location Germany Yard M2 GmbH Wilhelmshaven Juntan Hammer HHK 5/7 Year. 2002

Year of construction: 2017, operating hours: 10,750 h, condition: used, Field of application: Construction Iedoh Ty Anspfx Adnea Please contact Mohamad Fattah Ahmad for more information -Rotary BAT 410 -Engine 390 kW Main winch 30 to -central lubrication -air compressor Machine is in very good working condition!

Year of construction: 2009, operating hours: 11,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Preperation for grab use and oscillator MAN Engine LD 2842 LE 103 with 670 kW 2x 30To Winches with 36mm ropes 25 to hook Ijdpfxeh Ty Are Adnja Basismast, Mast: 2x 6m + Masthead

Year of construction: 2015, operating hours: 8,100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine 670 kW Tier 3 2x Winches 300 kN Counter weight 32,5 to Ijdoh Ty Ayspfx Adnoa Additional informations: -Additional reversing camera, winch monitoring -Hammerhead - Liebherr Hydraulic Oil Plus (Longlife & Bio) -LiDAT plus incl. Teleservice - Central lubrication system slewing ring - Electric refueling pump -Air conditioner - Auxiliary heating - Orthopedic driver's seat - Gripper calming winch 3to - preparation until bulkhead plate - Main winch constant pull one winch - Wind synchronization - Litronic SWG control - Auxiliary hydraulics for diaphragm wall grab Leffer - Rope winch - VRM ready - Crawler carrier hydraulic quick couplers