Used Liebherr 922 Litronic for sale (241)

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2015, Year of construction: 2015, driver cabin: other, Vehicle location: Bovenden. Superstructure: Liebherr concrete mixer HTM 904F 9m³ on Dautel WS4 interchangeable system. The concrete mixer is part of an interchangeable system (Dautel WS4) with a VDL SK-25-5700 roll-off device with push-articulated arm for containers up to 7 m in length. Dsdsx H Twcepfx Ac Njkh The interchangeable system was removed from an Arocs 3240 8x4 with a 4250 mm wheelbase. Interchangeable system and roll-off device available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. Dedpfx Acex Huxuj Nekh All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany, Stuttgart 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Djdpfx Acjxy Amqj Nekh ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Delivery terms: EXW Please contact Christiaan Dekker for more information Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Central greasing Webasto heating CE Dodpfxew I Ex Te Ac Nekh Always Liebherr serviced

Condition: used, Year of construction: 2010, operating hours: 6,092 h, Equipment: soot filter, According to our 'General Terms and Conditions', and offered without any guarantee or warranty, we are pleased to offer you the following vehicle as a non-binding offer, subject to prior sale, error or typographical mistakes until the conclusion of contract: Liebherr LRS 645 Reachstacker / Container Handler Year of manufacture: 2010 6-cylinder diesel engine displacement: 10,500 cc 270 kW / 367 HP 6,092 operating hours 2,627.3 driving hours 9,086 km Unladen weight: 71 t Lifting capacity with travel: 43 tonnes; lifting capacity with hydraulic support without travel: 45 tonnes Spreader designed for 20", 30", 40" and 45" containers Diesel tank capacity: 600 litres Hydraulic oil tank capacity: 900 l Steering axle track width: 3,313 mm Drive axle track width: 4,231 mm Hydraulic front support Central lubrication Rotary servo on the mast Dkodpfox Hcagox Ac Nsh Hydraulically extendable towing jaw 2 motors for drive; drive motor, driver's side front, replaced new in 2024, price €63,000.00 (net) Reversing camera Various work lights 2 x rear rotating beacons Rear tow hook 2 x reversing lights Hydraulic rear steering 2 x rubber bumpers front Tyres: 18.00-25 Bridgestone, 40 PLY Rating, Tubeless, Extra Tread, E-Lug S2 Tube tyres, front: dual mounted approx. 70%; rear: single approx. 80% Full cabin with air conditioning, air conditioning must be refilled Radio / CD Roof grille Sunblind Cab can be moved to the front edge Maximum height: 19,250 mm Maximum lifting height at spreader: 16,190 mm Maximum outreach: 18,900 mm Minimum outreach at max lifting height: 13,000 mm Wheelbase: 6,500 mm Overall length: 9,200 mm Price: €140,000.00 (net) All information provided without any guarantee or warranty. Our 'General Terms and Conditions' apply. Place of jurisdiction for both parties up to a disputed value of €50,000.00 is the District Court of Ludwigslust; for values exceeding this, it is the Regional Court of Schwerin. Subject to error, typographical mistakes, and prior sale.

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Airco back drive camera tyres: 26.5R25 approx 60-70% good Dedpfexnmz Isx Ac Nekh bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: excellent (used), power: 400 kW (543.85 HP), operation weight: 90,100 kg, chain condition: 80 %, Year of construction: 2018, operating hours: 9,708 h, LIEBHERR R 976 HD Year: 2018 Hours: 9.708 hrs. Monoboom 7,20 Meter Stick 2,90 Meter V-edge Rockbucket with teeth (RESCH-KA-TEC), cutting width 2,15 Meter, capacity 5.2 cbm, condition 70% good Undercarriage with with double-web shoes 600 Millimeter Condition of the u/c: 80% good Liebherr 8 Zylinder V-Dieselengine, kW/HP 400/544 Central lubrication for the machine and for the slewing ring Rear and side camera Protection grill over the cabine Original Painting Full service machine from Liebherr Recent repairs: New hydraulic oil cooler Dodpfx Asxhclisc Nokh New high-pressure pump New control unit Operation weight 90.100 KG CE/EPA Technical and optical in a very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Dsdpfx Acox Ezyvs Nekh Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: good (used), Year 2003 Dsdpfxst Utdpo Ac Nokh Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drivetrain Dksdpfx Aswz Ut Ioc Njh Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Identification Serial number: 088666 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 15.86x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, power: 150 kW (203.94 HP), fuel type: diesel, Year of construction: 2010, operating hours: 10,871 h, Equipment: cabin, steel tracks, LIEBHERR PR734 XL year 2010, hours 10871, weight kg 23500, kw 150 Dkedpfji Uy Dcex Ac Njh

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Dkjdpjxvr Ensfx Ac Njh Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, semi and fully automatic. Fully functional, with control system. Dksdpfx Acjrpmlre Neh

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 10,600 h, * 10,600 operating hours * Operating weight: 8,350 kg * Hydraulic quick coupler * Bucket and pallet forks Dedpfx Aoxzcttsc Nekh * Maximum speed: 30 km/h * Immediately ready for operation

Condition: used, Year of construction: 2014, Equipment: all wheel drive, Errors and prior sale excepted. Viewing by appointment only. WhatsApp inquiries will not be answered. Dksdpsvpc Rrjfx Ac Neh

Condition: used, power: 170 kW (231.14 HP), Year of construction: 2017, operating hours: 7,229 h, Equipment: air conditioning, LIEBHERR R936 NLC year 2017, hours 7229, weight kg 33200, kw 170, hammer system, block valves Djdpfx Acji Uy Afs Nekh

Condition: used, Year of construction: 2014, operating hours: 11,800 h, Equipment: all wheel drive, New arrival: Liebherr L 542 Z 2plus1 Chassis number: VATZ1269CZB035975 Year of manufacture: 2014 Operating hours (read off): approx. 11,841 Delivery date: 20.05.2014. Service history available on Liebherr central computer up to 27.09.2023 – 10,076 hours 4-cylinder inline engine, water-cooled, turbocharged, Emission Stage IIIB, 155 HP Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission Equipment: - Ride control - “Comfort” driver’s seat with pneumatic suspension (with seat heating) - Radio with CD and USB connection - 2 work lights at the rear driver’s cab roof - 4 work lights at the front driver’s cab roof - Automatic engine shut-off after 5 minutes at idle - 3rd hydraulic control circuit – proportional control via joystick - Pre-filter for engine air intake “TOP-AIR” - Automatic central lubrication system (Liebherr factory installation) - Access aid for easier cleaning of the windscreen - Lint screen in front of cooling package prevents radiator contamination - Coarse-mesh radiator for easier cleaning - Reversible fan for cleaning of the cooling package - Coolant pre-heating (with 220 V) - Sun visors front and rear - Tilting window left in driver’s door - Adjustable steering column (height and tilt) - Tilting window left in driver’s door - Tilt cylinder – piston rod protection - Reversing warning system (“beeper”), can be switched off Dedpfxsxy Dz Nj Ac Njkh - Provision for rotating beacon - Reversing camera Tyres: 20.5 x 25 L3 Front axle 2 – 95% tread, as new Tyres: 20.5 x 25 L3 Rear axle 2 – 95% tread, as new Offered with fixed mounted 2.8 m³ bucket – price: €43,900 net Optional equipment at extra cost: - Hydraulic quick coupler €3,550 (incl. conversion from fixed bucket to quick coupler bucket) - High-tip bucket from 3.0 m³ to 5.5 m³ from €4,950 - Bucket with clamp for QC, 3.0 m³ from €3,660 - Light material bucket 4 m³ €4,500 - 4-in-1 bucket 2 m³ on request - Pallet forks 5 or 8 tons from €1,990 - Available with used weighing system as well! Pfreundt WK 50 – €3,950 Printer for scale €850 All prices net export – domestic plus 19% VAT Sale to business customers or export only. Sale as is. No guarantee or warranty. The stated mileages or operating hours are those read from the meter; we do not guarantee their accuracy! Subject to prior sale. Vehicle description does not constitute a binding offer, and details are not to be considered as warranted characteristics. Description and information serve only for general vehicle identification and do not constitute warranty under commercial law. No guarantee for completeness. Stated details/descriptions and images are non-binding and not to be deemed guaranteed properties. Only those specified in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors.

Condition: used, color: other, Year of construction: 2020, Serial number: 58157 Machines for Sale! Dsdpfx Acoxxxhus Nskh Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, first registration: 01/2015, Year of construction: 2015, operating hours: 13,739 h, Liebherr A916 - 110 KW - Central Greasing - Camera Year: 2015 Dkjdpfexxavajx Ac Njh Hours: 13,739 110 KW engine Central greasing system Camera system = Further information = Model year: 2015 Drive: Wheeled Engine displacement: 4,580 cc GVW: 18,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: excellent (used), functionality: fully functional, color: white, Year of construction: 2018, Mobile Crane | LIEBHERR LTM 1200-5.1 - First registration: 13/04/2018 - Inspection sticker valid until: 04/2025 - Recorded mileage: 43,312 km (as of January 2025) - Crane operating hours: 6,562 h (as of January 2025) - Carrier operating hours: 2,373 h (as of January 2025) - Type/Variant/Version: A54B - Colour: white - Max. load capacity: 200 t - Telescopic boom: 72 m - Max. lifting height: 101 m - Max. outreach: 80 m - Curb weight: 59,280 kg - Gross weight: 60,000 kg - Drive type: Diesel - Emission class: Euro 4 / 97/68QA*2012/46QA - Maximum speed: 80 km/h - Displacement: 11,946 ccm - Power: 400 kW - Equipment: 5 axles, seats: 2, radio control, reversing camera, fire extinguisher, first aid kit, 2 pcs. ladders, rear storage box - Tyres: MICHELIN X-CRANE+, 385/95R25 Inspection/viewing possible at any time by prior arrangement. Dksdpfx Acoxpvb Ts Njh #Tags: Liebherr | Liebherr Crane | LTM1200

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Djdpsw Rcrvofx Ac Nskh Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: used, Year of construction: 2012, operating hours: 5,626 h, Equipment: all wheel drive, New arrival!! Liebherr L 514 P (Parallel Lift Frame) Stereo Loader (articulated steering + rear axle steering – extremely maneuverable!!!) Last model year without particle filter and AdBlue!!! Chassis number VATZ1115AZB 031099 Operating hours according to meter: 5626 72 kW 98 HP, Total weight: 10,500 kg Unladen weight: 9,000 kg * Hydraulic control circuit for high-tip bucket, grapple bucket, clamshell bucket, snow plow * Automatic central lubrication system Dkodpfx Acjxlw Ims Nsh * 2 work lights on cab roof (front) * 2 work lights on cab roof (rear) * Comfort seat with suspension * Adjustable steering column * Radio pre-installation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (blinker) at rear center cab * Reversing camera with separate monitor * Main electrical master switch Hydrostatic drive with 2 speeds Tires: Front axle: 17.5 R 25, 20% good Rear axle: 17.5 R 25, 40% good Width: 2,400 mm Various buckets for this machine in stock Additional equipment available at extra cost: Clamshell bucket 2.0 m³ from €3,250 High-tip bucket, 2.0–2.5 m³ from €3,950 High-volume bucket 3.0 m³ No. 59 – €2,950 Screening/mixing bucket 5-ton pallet fork from €2,190 Price with quick coupler and 1.6 m³ bucket: €43,900 net + VAT. Other equipment available on request! All prices are ex-stock, net price + 19% VAT for domestic sales or for export! We are happy to arrange transportation to your location. Sale only to commercial customers or for export. Sale as is, as seen. No warranty or guarantee. The listed mileage and operating hours are read off the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided shall not be regarded as guaranteed characteristics. The description and details serve solely as general identification of the vehicle and do not constitute a warranty in the legal sense. No claim to completeness is made. All details/descriptions and photos are non-binding and do not constitute guaranteed properties. Contract terms in order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical or transmission errors. The seller has not inspected the machine. Features may require individual verification. We are also happy to consider your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for fast and trouble-free overseas transport.

Condition: excellent (used), color: red, mast type: telescopic, Year of construction: 2012, Year of manufacture: 2012 Body brand: LIEBHERR LTR 1100 CE marking: yes Technical condition: very good Visual condition: very good Price: On request HYDRAULIC WINCH FOR LIEBHERR LTR 1100 CRANE YEAR OF MANUFACTURE 2011/2012 1.3 t CE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH Dkjdpjuxvz Tofx Ac Noh

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Djdpspq R Sxsfx Ac Nekh Liebherr 924 Litronic machine for sale. The equipment is from 2007

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Dsdpfjxtu Dhex Ac Nekh