Used Letterpress Printing Machine for sale (67,282)

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Cjdpexz Ewnofx Aiijri

Condition: used, Year of construction: 2007, Technical Specifications: Crjdpfxe Aht Dgs Aiisi Printing process: Wet offset Number of printing units: 8 Maximum printing width: 736 mm Maximum paper width: 740 mm Minimum paper width: 300 mm Maximum unwinding/rewinding roll diameter: 1,270 mm Maximum mechanical speed: 365 m/min (1,200 ft/min) Maximum printing speed: Depending on the installed equipment and operating conditions Paper weight: Approx. 40–250 g/m² Electrical supply: 400 V, 50 Hz, 3-phase Web tension control: Integrated Web guiding: Ultrasonic edge control Main machine control: Touchscreen-based control system Available Printing Cylinder Repeat Lengths: 520 mm, 524 mm, 540 mm, 544 mm, 550 mm, 558 mm, 570 mm, 580 mm, 602 mm, 607 mm, 636 mm, 639 mm, 645 mm and 680 mm. Printing Units: • 8 wet-offset printing units • Variable-format offset printing system • Plate cylinders with format-dependent configuration • Rubber blanket cylinders • Servo-driven individual printing units • Motorized adjustments • Automatic register control • Ink supply and ink level monitoring • Dampening systems with ceramic rollers • Integrated temperature control • Automatic washing systems Unwinding and Web Handling: • Unwinding unit for rolls up to 1,270 mm diameter • Pneumatic reel-loading system • Automatic web tension regulation • Ultrasonic web edge guiding • Web cleaning system • Web transport and guiding rollers Drying and Cooling: • UV curing system with UV lamps • UV drying stations integrated into the printing line • Cooling units for the printing units • Chill-roll cooling system • Temperature-controlled inking and dampening components Additional Equipment: • Flexographic printing/coating unit • Anilox roller system • Doctor blade chamber • Variable-format flexographic unit • Web inspection system • BST video web monitoring • Barcode analysis software • Print defect detection software • Automatic register control • Integrated operator control panel Machine Configuration: • 8-color web offset printing press with additional flexographic printing/coating capability, UV curing, web inspection, and automatic register control. • Suitable for printing on paper substrates within the specified material range.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 3,190 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: documentation/manual, 2020 HEBBECKER S-Line Automatic Carousel Screen Printing Machine with 2 Flash Stations Professional automatic carousel screen printing machine manufactured by HEBBECKER, designed for high-volume textile printing operations requiring precision, stability, and production efficiency. The machine is part of the HEBBECKER S-Line industrial series and offers reliable automated performance for professional textile and industrial printing applications. Built with robust industrial components and advanced servo-controlled technology, it ensures consistent print quality and optimized production workflow. Technical Specifications Manufacturer: HEBBECKER Model: S-Line Year of manufacture: 2020 Machine type: Automatic Carousel Screen Printing Machine Configuration: 4 Colors / 8 Stations Control system: Siemens touchscreen interface Drive system: Servo-controlled printing technology Application: Textile and industrial screen printing Advanced Technical Features AC Servo high-precision drive system Frequency-controlled pallet drive 4-cylinder POWER squeegee system Siemens SMART touchscreen control panel Microprocessor control with diagnostic system 6 integrated standard printing programs MULTIflash production mode High-density printing mode Cool-stop function Sampling mode for test production Start-up and finishing production programs Screen cleaning mode Free-wheel pallet positioning mode Aluminium sandwich pallets Stable high-speed indexing system Designed for high-volume industrial textile printing Printing Capacity 4 Colors / 8 Stations configuration Maximum print size: 400 × 450 mm Heavy-duty industrial construction Optimized for continuous production environments Crodpfx Aey Tywvsiiji Included Equipment 2 x Industrial Flash Drying Units Adjustable height drying systems Efficient infrared curing support Suitable for multi-color textile production 2 x sets of original Hebbecker pallets in excellent condition. 2 x laser guide systems. Condition Machine in excellent working condition Used in the past 2 years for only a few hours per week. Fully operational Regularly maintained Packaging and installation available upon request.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Crjdezap Sbopfx Aiiei Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), Year of construction: 2025, EFI Vutek Pro33R + LED roll printer Print width 3.2m Demo machine with very low mileage 8 Ricoh Gen 6 print heads, 5pl UltraDrop Color: 4C; Resolution: 1100 dpi Installed in August 2025 Speed up to 256 m²/h Slitter for Pro33 Media edge guard sensor New price: €225,000 (complete, August 2025) Cjdjzzbf Iepfx Aiiori

Condition: ready for operation (used), Year of construction: 2013, A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Crjdpfxexd Av Hs Aiioi

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Cjdpfx Aey Dfcloiijri Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Codpfjxxmz Nsx Aiieri Application: Inline with bag-making machine Condition: used

Condition: used, Mutoh XpertJet 1641SR 64″ Eco-Solvent Printer Uses Mutoh’s new MS-41 Eco-Solvent ink Environmentally conscious 1-liter ink bags Automatic Bi-Directional Alignments User-friendly touch panel Codpoz Srypofx Aiieri Print speeds up to 600 sqft/hr New media feed system internal LED Lighting 30kg take-up included Print Technology- Drop-on-demand Micro Piezo Inkjet Technology Print Head-1 Piezo Nozzle Configuration - 180 nozzles x 8 lines/head Drop Mass Range (pl)- 3.5 to 35 Head Heights- Low: 1.5 mm / middle 2.5 mm / High: 4.0 mm Max. Media width 1625 mm (63.97") Max. Print Width 1615 mm (63.58") Max. Media Thickness 0.3 / 1.3 / 2.8 mm Media MeasurementsØ 150 mm / 2" or 3 " / 30 kg Standard non-motorised roll-off system Ink Type MS41 Eco Solvent inks 1 litre packs in foil, for use in reusable ink cases Ink Colours CMYK Low Chemical Emissions Certification GREENGUARD Gold, wallpaper Category UV Durability 3 Years outdoor without Lamination

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 Cedjzuw R Hjpfx Aiiori - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: excellent (used), Colorwave 600 in very good working condition, folding mechanism is functioning properly. Still under a maintenance contract. Crsdpj Afpp Tefx Aiiji Video available upon request via WhatsApp.

Condition: ready for operation (used), functionality: fully functional, That’s a good position. Crodpfsy Siq Aex Aiiei

Condition: new, functionality: fully functional, machine/vehicle number: 2QU25A#B1K, number of ink cartridges: 6, color channels: 6, number of print heads: 3, resolution (max.): 2,400 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 420 mm, paper width (max.): 1,626 mm, number of feeding trays: 1, total length: 2,605 mm, total width: 790 mm, total height: 1,402 mm, Equipment: documentation/manual, HP DesignJet Z6 Pro 64-inch Large Format Printer – Brand New, Original Packaging Brand-new, unused HP DesignJet Z6 Pro 64-inch professional large-format printer, manufactured in 2021 and still in its original factory packaging. The printer has never been installed or used and is offered as new old stock (NOS). Designed for high-quality photographic printing, fine art reproduction, posters, signage, maps, technical drawings, and commercial graphics. Technical Specifications: Manufacturer: HP Model: DesignJet Z6 Pro 64-in Product Number: 2QU25A#B1K Year of Manufacture: 2021 Condition: Brand New / Unused Packaging: Original Factory Packaging Printing Technology: HP Thermal Inkjet Maximum Media Width: 1,626 mm (64 inches) Supported Roll Width: 420–1,626 mm Ink System: 6-color pigment-based HP Vivid Photo Inks Number of Printheads: 3 Maximum Print Resolution: 2400 × 1200 dpi Maximum Print Speed: 98 m²/hour Media Handling: Automatic roll feed and integrated cutter Connectivity: Gigabit Ethernet Power Supply: 100–240 V, 50/60 Hz Dimensions (W × D × H): 2605 × 790 × 1402 mm Weight: Approximately 169 kg Condition and Availability: Brand new, never used Manufactured in 2021 Original factory packaging Available for immediate sale Located in the United Arab Emirates Sale terms: EXW (Ex Works) International buyers welcome Important Note: Manufacturer's reference images are shown. The actual printer is brand new and remains in its original packaging. Additional photographs of the original packaging and product identification label can be provided upon request. Crjde Afvcmopfx Aiioi Please contact us for further information or shipping arrangements.

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Cjdpfxjxzrx Ej Aiiori Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Crodpfoznmilox Aiioi Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 8, color channels: CMYK+BIAŁY+LAKIER, number of print heads: 2, resolution (max.): 1,440 dpi, paper width (max.): 1,600 mm, paper height (max.): 200 mm, input voltage: 240 V, For sale: Mutoh SmartColor H200. Large-format printer for direct LED-UV printing with a width of 160cm. This plotter is based on the bestselling Mutoh ValueJet 1638UR LED-UV model. By combining Japanese and Italian technologies, a compact plotter with great capabilities has been created. The machine is equipped with a heavy table with a conveyor belt and a very powerful vacuum system. Thanks to its robust construction, we can print materials weighing up to 100kg/m² and of unlimited length and height, up to over 200 millimeters in standard configuration! Undoubtedly, thanks to such a large clearance, the plotter offers enormous possibilities for printing on finished products. The Mutoh SmartColor H200 is a 2-head piezo LED-UV printer with a working width of 1.62 m. In addition to CMYK colors, it also features white and varnish. This configuration allows for multi-layer printing in a single pass (simultaneous printing). This provides significantly greater capabilities compared to conventional "eco" printers and competing solutions. Additionally included: - Auxiliary table - Winding system - Deionization strip The plotter is operated with dedicated software. The plotter can print on black, colored, metallic, fluorescent, reflective, transparent, and other materials. Of course, it can also handle conventional media such as papers, white films, banners, canvases, wallpapers, coated and uncoated materials. The low ink curing temperature allows for the use of heat-sensitive media, such as thin films. Furthermore, the print is immediately dry and ready for further processing, assembly, or shipping. The new LED VJ-UA31 inks do not emit volatile organic compounds (0% VOC), meaning the device can be used in an office setting without additional filtration or air exchange – something that cannot be said about competing LED technologies. The inks are also flexible and resistant to cracking, bending, etc. The Mutoh SmartColor allows for printing in several new modes, such as 2xWHITE + 2xVARNISH + CMYK + 2xVARNISH, allowing for spectacularly enhanced prints with a thick varnish. Thanks to multiple layers, it is also possible to print increasingly popular "day-night" applications. The possibilities of using white ink, whether as an undercoat, overcoat, or simply printing on colored media, do not need to be explained to anyone! Inks in 1000 ml bags (CMYK and varnish) and 500 ml (white) installed in the following combination: CMYK + 2 x white + 2 x varnish. Key advantages: - Two print heads + two LED UV lamps - Resolution up to 1440 dpi - 6 colors: CMYK + WHITE + VARNISH (simultaneous printing) - Multi-layer printing (enhancement, special effects, Braille alphabet) - Prints are dry immediately after printing - Low energy consumption - No volatile organic compounds (0% VOC) - possibility of continuous operation in "office" conditions. The plotter has been used to print approximately 900 m². It is in 100% working order and ready for use. At the time of sale, a service technician will perform an inspection and eliminate any potential defects at the seller's expense. Csdpfxs Admb Do Aiijri The machine is currently cleaned and preserved. Re-commissioning requires refilling with inks. Questions only via email.

Condition: ready for operation (used), Year of construction: 2013, Machine in operation since: 2013 Reason for sale: Replacement as part of the standardization of the machine park Current operating speed: Stable production at 100 m/min Video reference: The machine is running at 100 m/min in the presented video The machine is sold together with integrated 6th generation Hunkeler unwinding and rewinding units. Year of production: 2013 Printing method: Piezo single-pass printing, four tones per drop RIP: EQUIOS Ink: Water-based pigment inks / water-based dye inks Resolution: Maximum 720 x 360 dpi Crodpsz E Nz Aofx Aiisi Product configuration: Dual Engine Duplex Printing speed: Maximum 128 m/min (419.94 ft/min) Paper width: 165-520 mm (6.5"-20.47") Printing width: 150-506 mm (5.9"-19.92") Dimensions (W x D x H): 2,186 x 1,766 x 1,905 mm Width including operation panel: 2,028 mm Weight: 1,766 kg (3,894 lb) - Simplex POWER SUPPLY Printer: Three-phase 200-240 V, 25 A / 380-440 V, 15 A Single-phase: 200-240 V, 13 A Single-phase: 100-240 V, 2 A OPERATING ENVIRONMENT Temperature: 18-24°C Relative humidity: 40-60% No sudden temperature changes No condensation

Condition: used, The VJ-2638X printer is versatile, suitable for producing a wide range of outdoor and indoor prints such as long-term outdoor posters, billboards, building announcements, signs, banners, backlit signage, POS displays, vehicle graphics, fine art reproduction, and posters. The VJ-2638X is a robust printer featuring proven technology from Japan. It includes a staggered dual head setup with the latest generation 1440 nozzle piezo heads, ensuring extreme print quality and sharpness at all production speeds. The printer incorporates Mutoh Intelligent Interweaving (i²) and DropMaster technology, achieving super high-resolution prints at 22 m²/h (720 x 1080 dpi) and production speeds of 33 and 39 m²/h at 720 x 720 dpi. It produces durable prints on both coated and uncoated substrates with exterior durability up to 3 years. Technical Key Specifications Credpfx Aiez Sr D Ieisi Print Technology: Drop-on-demand Micro Piezo Inkjet Technology Print Heads: 2 (staggered setup) Nozzle Configuration: 180 nozzles x 8 lines Drop Mass Range: 3.6 to 35.2 pl Head Heights: Low: 1.5 mm, Middle: 2.5 mm, High: 4.0 mm Max. Media Width: 2600 mm (102.36”) Max. Print Width: 2590 mm (101.97”) Max. Media Thickness: 0.3 / 1.3 / 2.8 mm Media Drying System: Individually controlled pre-heater, fixer, and dryer (30 - 50 °C) Performance The printer offers various quality and speed settings, with print resolutions ranging from 720 x 1440 dpi to 360 x 720 dpi, and speeds from 12 m²/h to 48 m²/h. Ink Specifications Ink Types: Eco Ultra / UMS Ink Volume: 220 ml, 440 ml & 1000 ml (optional adapter required for 1000 ml pack) Ink Colours: CMYK Ink Consumption: 8 ml/m² (average at 720 dpi, 67% coverage) UV Durability: 3 years outdoor without lamination (lamination required for heavy-duty applications)

Condition: used, functionality: fully functional, color channels: CMYK, Weiß, Gloss/Klarlack, Primer, number of print heads: 4, year of last overhaul: 2026, type of input current: AC, input current: 2 A, input voltage: 100 V, Equipment: brochure finisher, documentation/manual, For sale is a Roland VersaUV LEF-300 UV flatbed printer including a BOFA extraction system and a primer configuration. Extensive investment – 4 new original Roland print heads A major advantage of this machine: significant investments have already been made in important components. All 4 print heads have been replaced with new original Roland print heads. In addition, 8 dampers, 4 cap tops, a dust filter, and other maintenance and wear parts have been renewed. A total of €7,227.12 gross was invested in these works, including the four new original print heads, other components, materials, and technician services. The corresponding invoice is available and can, of course, be viewed upon serious interest. Primer configuration Crjdjz Eazgopfx Aiiji Approximately €700 was also invested in reconfiguring the machine for primer application. Instead of a second clear coat/gloss channel, primer is now directly available via the machine. This is particularly interesting for applications where additional surface preparation is required to improve adhesion. The machine is equipped with CMYK/color, white, gloss/clear coat, and primer. BOFA extraction system included The offer also includes a BOFA extraction system. This means that not only the printer itself is offered, but a comprehensively equipped complete package. Inspection & test print possible Especially when purchasing a used professional UV printer, one should be able to personally inspect the machine before buying. Therefore, inspection and test printing on site are expressly possible. The existing invoices and documentation regarding the work carried out and the replacement of the print heads can also be viewed. Why is the printer being sold? I acquired the Roland specifically for my own production and subsequently invested extensively in the machine. However, in practical use, it has become apparent that I need a different production process for my very specific application and my requirements for the final product. Therefore, I am restructuring this production area and selling the Roland. Location & shipping Location of the machine: 3730 Austria Collection and inspection on site are possible. Alternatively, the machine can be shipped throughout the EU by a forwarding agent. The transport costs depend on the respective destination and can be clarified in advance. Price €16,900 net (negotiable) An interesting complete package for commercial enterprises looking for a Roland VersaUV LEF-300 with four already renewed original Roland print heads, a primer configuration, and a BOFA extraction system. Please feel free to contact me if you are seriously interested. Inspection and test printing are possible by appointment. Weight: 144 kg Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.1 A Number of phases: 1 φ Printing area: 770 × 330 mm Max. workpiece/media size: 800 × 360 mm Max. object height: 100 mm Max. object weight: 8 kg Printing resolution: max. 1,440 dpi

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Crsdpfxevva E Hs Aiisi

Condition: as good as new (ex-display), The machine is in perfect condition and has a counter reading of 392,000 copies. The machine is equipped with the following options: DF 713 / UK 112 / PF 707m / FA 502 / MB 508 / RU 518m / FS 532m / IC 317. Ceds Afkfvopfx Aiisri

Condition: used, Year of construction: 2020, !! We are happy to advise you !! All systems are from 2020 or 2021 //// Used until 12/2021 7 x Domino printer 2 heads new price €4500 now €1900 1 x Makroprint x8 printer with 8 heads new price €18,000 now €8000 Crodpfx Ajrlmwmeiiji 3 x Makroprint x4 printer with 4 heads new price €10,000 now €4000 2x Makroprint X1 new €1250 1x Edding In Line €1000 4x Chinese and Italian system opinion German open to all HP cartridges piece with 4 heads €1500 A discount is possible for 2 devices!!!

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh PRO C 5300SL” colour production system Item for sale: 1 x Ricoh PRO C 5300SL with the following specifications: incl. SR5090 finisher incl. Fiery Controller E-27B Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Counter readings: Total: Approx. 854,377 pages Colour: Approx. 823,414 pages Black: Approx. 30,963 pages Credpfx Aio Afulyeiei Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Cjdpfx Ajzb Aivsiisri Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 1996, Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible. Crjdpfx Aexbrxfoiioi