Used Lematec Drilling Machine for sale (65,314)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle Nkedsyrhrwspfx Ahvew • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Nsdpfx Ahsyrhqtovokw Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 595 € 12 mm 19 mm Weldon 0.1 kW 175 mm 250 mm 312 mm 10 kg 12 mm 36 mm 51 mm 70 mm 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features & benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation Nodpeyrhqmjfx Ahvokw • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and theoperator from work on too thin work piece Standard shipping set: • Magnetic Base Drilling Machine • Plastic Box • Swarf Shield/Cutter Guard • Coolant Bottle Assembly • Safety Chain with Snap Hook • Allen wrench hex s=4 • Operator’s Manual • Standard shipping weight - 16,7 kg (36 lbs OPTIONS (PRICES ON REQUEST): Coolant system 2 lt Vacuumpad Compressed air ejector Pipe attachment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm Nsdpoyrhp Nofx Ahvekw 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters Nkodpfx Ahoyrhp Asvow • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: Nksdpfxeyrhpps Ahvew • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm Nodpshx E T Hefx Ahvjkw -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: excellent (used), Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg Nkjdpfehv S Etex Ahvew

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Gosmeta, pillar drilling machine type B-30N -Motor: 1.1kw -Speeds: 110 - 920 rpm, 5 levels -Table size: Ø 330 mm, travel 510 mm -Spindle mount: MK3 Nksdehx E Ugepfx Ahvjw -Spindle stroke: 125 mm -Projection: 300 mm -Columns Ø: 120 mm -Dimensions: 490/750/H1850 mm -Weight: 282 kg

Condition: good (used), Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm Nksdpec Rpnnofx Ahvjw -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Njdpfx Aoyrgcbshvokw Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) Nedpfxjyuiwaj Ahvokw - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 150 mm thread capacity 30 M spindle taper MT 4 MK column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm Nodpfowp Tp Djx Ahvskw

Condition: new, Year of construction: 2026, spindle speed (min.): 1 rpm, spindle speed (max.): 2,600 rpm, bar diameter (max.): 750 mm, overall weight: 18 kg, power: 1.3 kW (1.77 HP), Equipment: rotational speed infinitely variable, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Nksdsbc Sa Dspfx Ahvsw Motor 220V, 1300W, Speed 0-2600 rpm stepless Standard clamping range Ø 30 - 250 mm Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Nedpfeuix Sgjx Ahvjkw Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: new, Year of construction: 2026, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Nodpjl D Rw Eefx Ahvjkw Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Nkodpfx Ahoyq Rpievow Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030724/2003, Used drilling and milling machine Serrmac TCO 40. Model TCO 40/P Njdowrb Sxopfx Ahvokw Clamping: MK4 Drilling up to 40mm Year of manufacture: 2003 Belt transmission - 3 pulleys Spindle speed: from 100 - 2200rpm Speed change - 2 x with motor 5x with belt shifting Table dimensions: 630x255mm Table stroke: 425x240mm Coolant pump

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Njdpfsyq Irhjx Ahvskw Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm Nksdoyub Azepfx Ahvew

Condition: good (used), Csepel radial drill Nkedpfxoyubmto Ahvew Type: RF50/1600 Arm lenght: 1600 mm Max drilling capacity: 50 mm Max spindle speed: 2000 1/min Height of the machine: 2830 mm Machine lenght: 2190 mm Machine depth: 950 mm Weight: 3050 kg Under power in our warehouse.

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22 Nkjdpoyqxxrjfx Ahvow

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 1VR4100C6C1000267, color: yellow, operation weight: 1,209 kg, empty load weight: 1,209 kg, fuel: diesel, Equipment: rubber tracks, For sale is a Vermeer D 6x6 Navigator compact directional drill, previously used exclusively for demonstration and training purposes, complete with all accessories: 1 Vermeer D 6x6 Navigator drilling rig, 1 ST 250 (960-liter) drilling fluid mixing unit, 1 DCI SE UK3 drill head locator system (instrument, transmitter, monitor, 3 batteries), 45 drilling rods, each 1.83 m / 6 feet, 1 drill head, 1 150 mm / 6-inch hole opener. This machine is not refurbished but is practically new! Ready for immediate operation! Nkedpfoyt Smuox Ahvjw

Condition: used, Year of construction: 2008, used, in good condition with automatic length inspection device Manufacturer: Ayen Model: Magnum 8/10 V Year of manufacture: 2008 Nkedeyt R Nnepfx Ahvsw Machine no.: 0826788 Glue tank: 1.4 l Dowel diameter: 8 x 10 mm Dowel length: 30–45 mm with glue level indicator CE-type tested Glue gun mobile Space requirement approx. 480 x 480 x 900 mm Weight approx. 71 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in existing condition as inspected, function tested without overhaul, without warranty or liability

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: Njdeyplb Ropfx Ahvskw - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg