Used Lawn Drag for sale (231)

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug Ppodpotbq Eqofx Amyow - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Year of construction: 2011, condition: used, functionality: fully functional, Blackman & White Genesis 2300 Conveyor (DOM June 2011) Overall Size – 7.6m (including cradle) X 3.1m Belt size - 5m x 2m Cutting Window – 4.6m X 1.3m Max Cutting Speed – 1500mm/sec Pneumatic Oscillating Drag Knife with 1 spare tool head (Unsure on working state) Full Vacuum System (Single Zone) Leibinger JET3 Inkjet Marking System (NON WORKING) MasterCut 2100 CL Drive Software Included Ppedpfx Aszdkv Iomyjw Alphacam 2012 Processable Materials Composite Pre-Preg Materials (Carbon Fibre , Glass Fibre, Kevlar) Textile Fabrics Low Density Foam

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6LUD-321, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik ONE, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Axon LU 620 features: - Siemens Sinumerik ONE - 5-axis simultaneous machining Podpfxszdddgo Amyspw - Heidenhain glass scales in all 5 axes - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar internal coolant system - Air supply through the spindle - Media supply through the center of the table - Automatic workpiece measurement system Renishaw OMP 40 - Laser tool breakage detection system Blum NT A-3 Split - Paper band filter system - Ring flushing system on the spindle - Automatic side door - 60 magazine positions - SK40 - Drag chain chip conveyor - Chip flushing - Dust extraction system

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available Pedevriluepfx Amyspw • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS20, 1 ABUS LW wall-mounted slewing crane 250 kg load capacity / lifting capacity Jib length 3m + 0.6m extension (removable), 250kg load capacity With Abus Hitachi chain hoist, load capacity 250kg Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable drag, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is completely dismantled and immediately available Shipping by freight forwarder or pickup Please inquire about shipping costs by postal code Ppsdpfxjywfhuj Amyjw

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Pjdpjpwgr Hsfx Amyspw There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Pjdpfjv Awguox Amyopw Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, For inquiries regarding the road plates, please contact Mr. Herden (at ). Road plates / ground protection mats / incl. frame / 15 mm thickness / NEW / in stock & immediately available Price for 30 road plates incl. transport frame: €4,400.00 net / €5,236.00 gross - Dimensions (mm): 2,400 x 1,200 x 15 - Material: Hard plastic - Weight per plate (kg): 43 - Load capacity up to (t): 50 Properties of the transport frame: Material: Steel, galvanized The frames are stackable Plastic ground protection mats are the ideal solution for the temporary paving of construction site roads, meadows, during roadworks and events, during demolition work, and in landscaping projects. Plastic road plates protect sensitive surfaces (such as lawns, paved driveways) and prevent vehicles from getting stuck in the mud. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (at ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Magni telehandler sales and service partner. We are the official DMS sales and service partner. We are the official Gierking GMT sales and service partner. Pjdpfxezcuc Dj Amyopw We are the official Weber MT sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Ppjdju Nu I Tspfx Amyow Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, conveyor belt width: 635 mm, warranty duration: 12 months, total width: 3,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2028, electrical fuse: 16 A, opening width: 45 mm, working width: 635 mm, space requirement length: 1,235 mm, space requirement width: 3,700 mm, type of input current: three-phase, NEW +++ Dough Sheeter Rondostar 4000 ECO +++ NEW Computer control / Touch panel for all types of dough, for sheeting and lamination with automatic winder for rolling up to the right Stainless steel design, mobile Sheeting thickness adjustable from 0.2 to 45 mm electrically electric flour dispenser / flour spreader incl. 2 dough rollers / manual winder easy tool cleaning tested according to DGUV V3 standard, only available from us machine is mobile with locking device Connection: 400V, 16A-CEE plug Dimensions: 3700 x 1235 mm, WxD New machine & SAB tested with months of warranty Ppjdpjx Nccyefx Amyew Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Service package Spare parts box Drag chain Delivery service Instruction and commissioning We have other top-quality dough sheeters in stock!

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards Ppedpfx Ameyawkxoyjw * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Pedpfx Aepiarnjmyjpw Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: used, mileage: 299,230 km, power: 213 kW (289.60 HP), first registration: 12/2017, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal vehicle number: 1185 * MAN A47 Lion's City M NL 293-10.5, Power output: 213 kW * Emissions standard: Euro 6 * First registration: 12/2017 - MODEL 2018 * Maintenance records from previous years available. * Sample from the maintenance log: * 04.03.2026 at 298,801 km: Air suspension bellows, rear axle, all renewed * 02.02.2026 at 295,925 km: Inner swing door, entrance 2, inspected and assessed * 20.01.2026 at 295,113 km: Lighting action, carried out * 20.01.2026 at 295,113 km: Alternator V-belt, R-engine 6-cylinder, replaced * 20.01.2026 at 295,113 km: Chassis lubrication * 20.01.2026 at 295,113 km: Interim inspection / SP * 20.01.2026 at 295,113 km: Brake caliper, disc brake, front axle, left, wheel removed, replaced * 20.01.2026 at 295,113 km: V-belt drive components, checked and assessed * 03.12.2025: Shock absorber, rear axle, left front, replaced * 01.09.2025: Engine mount, R-engine 6-cylinder turbo, left + right front, removed and installed * 25.08.2025: Coolant pump, engine D0836 LOH CR, replaced * 21.07.2025 at 277,190 km: Fuel tank, steel, replaced (removed from below) * 21.07.2025 at 277,190 km: Air suspension bellows, rear axle, all renewed * 21.07.2025 at 277,190 km: Drag link, replaced * MAN A47 Lion's City Midi * 213 kW (290 HP) / Euro 6 * From first Austrian ownership * Full maintenance history available * Low original mileage * Destination displays front/side/side/rear with Gorba control unit * Convector heating * Blower at door 2 * 2x USB sockets at driver's station Psdpfx Ameyzlwqeyjpw * D1/D2/D3/D/N/R - Automatic transmission * Air conditioning * Manual folding ramp * Retarder * Waste bin/umbrella holder * Hand straps * Rosho video surveillance and Rosho reversing camera * 33 seats (including driver) * 49 standing places * and much more. Note: The purchaser is obliged to personally inspect the condition and equipment of the goods/vehicle! All information provided without guarantee. Interim sale reserved. Please refer to our terms and conditions.

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. Psdpfx Ajyx N Hqomyspw OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation Podpfxewcagco Amyjpw * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer * Easy Checker * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Mid-mount mower deck: * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: used, mileage: 1 km, power: 12 kW (16.32 HP), first registration: 01/2004, fuel type: gasoline, color: red, driver cabin: other, gearing type: other, Vehicle location: Bovenden, superstructure: lawn tractor 2 cylinder engine, cutting width: 1020mm, incl. accessories : snow blade, 2x mowing rotors, snow chains, 1x grass catcher, 1x salt spreader, 1x lawn aerator ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pjdpjvhg N Nefx Amyepw - .

Condition: used, mileage: 99,824 km, power: 103 kW (140.04 HP), first registration: 01/2021, fuel type: diesel, empty load weight: 2,194 kg, maximum load weight: 1,306 kg, overall weight: 3,500 kg, wheelbase: 4,490 mm, next inspection (TÜV): 09/2027, color: white, emission class: euro6, number of seats: 3, loading space volume: 14.7 m³, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, GVW up to 3.5 tonnes (optional, for an extra charge). Body variant: high roof in vehicle colour, Climatic air conditioning system, trailer coupling, central locking with remote control and interior operation, exterior mirrors electrically adjustable and heated, electric front windows, Multi-function display Plus, hill-start assistant, multi-function steering wheel, parking assistance system front and rear, partition, spare wheel with road tires, winter tires, heated windshield, daytime running lights, fog lights with integrated cornering lights, Composition Audio audio system (radio - SD card interface - MP3 playback function), Bluetooth hands-free system, USB interface, tire pressure monitoring system, long wheelbase, heat-insulating glazing, storage compartment package 2, driver's airbag, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver's ErgoComfort suspension seat (20-way seat adjustment) with armrest and lumbar support, seat massage function, start/stop system, diesel particulate filter, sliding door loading/passenger compartment on the right, immobilizer (electronic), headlight range adjustment, marker lights, exterior temperature display, power steering (electro-mechanical), paint: Candy White, hinges for rear doors with increased opening angle (270 degrees), double passenger seat with storage compartment and folding backrest to create a stowage table, storage compartments: 2 DIN slot at the front under the headliner, interior lights in the cab: front reading light, mobile phone interface, front bumper in grey with trim in vehicle colour, power sockets (12V connection) in the cab (4 pieces), truck registration, permissible total weight 3.50 t, underbody panel for reduced drag coefficient, radiator grille with chrome strip on top, exterior mirror - convex - left, exterior mirror - convex - right, twin headlights, LED turn signals integrated into exterior mirrors, marker lights on the side, floor covering in the cab: rubber, grab handle on the rear pillar on the left, grab handle on the rear pillar on the right, grab handles on the A-pillars, folding remote key, seatbelt warning system (driver's side), interior lights in the cab: LED, interior lights in the loading/passenger compartment: LED, dual-tone horn, lashing eyes in the cargo area, brake assistant (HBA), adjustable steering column (steering wheel), crosswind assist, SCR system (AdBlue technology), drive type: front-wheel drive, 6-speed transmission, body/superstructure: standard high-volume van, wheelbase 4490 mm, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer couplings, also up to 3500 kg - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear-view camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Ppsdpfxex Na H No Amyow

Condition: used, mileage: 86,418 km, power: 103 kW (140.04 HP), first registration: 12/2021, fuel type: diesel, empty load weight: 2,190 kg, maximum load weight: 1,310 kg, overall weight: 3,500 kg, wheelbase: 3,640 mm, next inspection (TÜV): 10/2027, color: white, emission class: euro6, number of seats: 3, loading space length: 3,400 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, Tow bar up to 3.5 t (available at extra cost). Body variant: High roof in vehicle color, Climatic air conditioning, central locking with remote control and interior activation, electrically adjustable and heated exterior mirrors, electric front windows, Multi-Function Display Plus, hill start assist, parking sensors front and rear with active side protection, reversing camera, cargo partition with window, spare wheel with road tires, all-season tires, daytime running lights, digital radio reception (DAB+), Discover Media audio navigation system with streaming & internet (touchscreen - USB), touchscreen, Bluetooth hands-free system, MP3 interface, multimedia interface with 2 x USB (Type C) ports at the front, voice control system, mobile online services App-Connect wired and wireless, emergency call system, tire pressure monitoring system, heat-insulating glazing, Storage Package 2, heated driver and passenger seats, tachometer, driver airbag, driver/passenger airbags – passenger airbag can be deactivated, anti-lock braking system (ABS), electronic stability program (ESP), engine start/stop system, particulate filter, sliding door for loading/passenger area on the right, immobilizer (electronic), headlight range adjustment, electro-mechanical power steering, trailer hitch preparation (socket and cable), Paint: Candy White, ladder rack system (removable), shelving system, wooden load floor with high interior trim, tie-down rails in cargo area – on side panel, lashing eyes in cargo area, rear step, hinges for rear doors with increased opening angle (270 degrees), double passenger seat with storage compartment, pre-installation for tachograph and accident data recorder, storage: 2 DIN slot at front under headliner, cabin interior lights: front reading light, lockable glove compartment, trailer stabilization program, dashboard with additional console, truck registration, permissible total weight 3.50 t, drag coefficient underbody paneling, radiator grille with upper chrome strip, convex exterior mirror – left, convex exterior mirror – right, twin headlights, LED indicators integrated into exterior mirror, front bumper in grey, cabin floor covering: rubber, entry handle on rear left pillar, entry handle on rear right pillar, grab handles on A-pillars, 2 folding radio keys, seatbelt warning system (driver/passenger), interior lights in cabin: LED, cargo/FG compartment lights: LED, dual-tone horn, 12V power sockets in cabin (2 units), brake assist (HBA), adjustable steering column (steering wheel), crosswind assist, SCR system (AdBlue technology), bodywork/build: standard high-roof van, wheelbase 3640 mm, drive type: front-wheel drive, 6-speed transmission. Over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to change, errors, and prior sale. Delivery available at extra cost. Export license plates available on site. Trade-in of your used vehicle possible. Retrofitting options (for an additional charge): - Tow bars up to 3500 kg possible - Auxiliary heaters - Display for reversing camera and/or navigation via smartphone (Android Auto) - Rear view system with rear camera - Workshop fittings - Cruise control - Retrofitting a tail lift (LBW) and other customized solutions for your business needs possible at extra cost. Psdpfx Ajxl Uxpomyopw

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cabin lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ppodpfx Amsvic Dfeyjw

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, Road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cab lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ppodpfx Amjvicw Eoyow

Condition: used, mileage: 470 km, power: 49 kW (66.62 HP), first registration: 04/2020, fuel type: diesel, overall weight: 5,500 kg, color: red, gearing type: mechanical, suspension: other, operating hours: 470 h, Equipment: air conditioning, all wheel drive, trailer coupling, Maul trailer coupling, 1st hand, radio, HU/AU new, first registration 02.04.2020 49 kW 3.331 cm³ 470 operating hours diesel all-wheel drive powershuttle transmission front weights glass roof air conditioning radio USB AUX hands-free kit towing muzzle automatic lawn tires 1. Hand warranty until 01.06.2025 permissible total weight 5.500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Psdpfx Amjvidfwoyjpw

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, overall weight: 40 kg, load capacity: 10 kg, controller model: R-30iB Mini Plus, The FANUC CRX-10iA is a modern, collaborative lightweight robot (cobot) characterized by ease of operation, high reliability, and maximum safety. Combined with the powerful R-30iB Mini Plus controller, this system provides a flexible and cost-effective solution for diverse automation tasks in both industrial and craft sectors. With a payload of up to 10 kg and a reach of 1,249 mm, the CRX-10iA is ideal for applications such as machine tending, assembly, material handling, packaging, palletizing, or quality inspection. Thanks to its integrated safety features, the robot can operate directly alongside human workers without a safety fence (depending on risk assessment). Programming is intuitive, either via the user-friendly touch tablet or guided by hand (drag & drop function). Even users without in-depth robotics knowledge can rapidly create and adapt programs. Proven FANUC technology ensures the highest precision, repeatability, and a long service life. Technical Highlights: Podpfsy Hp I Dox Amyjpw - Payload: 10 kg - Reach: 1,249 mm - 6 axes - Repeatability: ±0.04 mm - Protection class: IP67 (robot arm) - Collaborative operation with integrated force and torque monitoring - R-30iB Mini Plus controller with a modern user interface The FANUC CRX-10iA stands out with its fast commissioning, low maintenance requirements, and flexible deployment options. It is ideal for companies looking to efficiently automate production or optimize existing processes.

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures Ppedeiwdaqopfx Amyow (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours Ppjdpfxst Nfaro Amyow WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: Psdpfx Amsqpd D Ioyepw • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.