Used Lawn Drag for sale (294)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section Dsdpfx Aswii Hfoc Njcc The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN48357, Chamber furnace with exhaust hood, in very good condition. 12-month warranty. - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm Dcedpfx Acjtbq Eqo Noc - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with dampers, electrically operated by Belimo actuators - Intake air fan controlled by frequency inverter and regulator - Stainless steel exhaust hood - Bentrup 507 control unit, thyristor control - Controller language: German only, switching to other languages not possible! - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current consumption: 26 amperes - Connecting voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Supplied with a 12-month warranty. Viewing by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, enameling oven, tempering furnace, laboratory furnace, hardening furnace

Condition: used, mileage: 90,925 km, power: 103 kW (140.04 HP), first registration: 06/2021, fuel type: diesel, empty load weight: 2,063 kg, maximum load weight: 1,437 kg, overall weight: 3,500 kg, wheelbase: 3,640 mm, next inspection (TÜV): 08/2027, fuel: diesel, energy efficiency: D, fuel consumption (urban): 8.3 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.7 l/100km, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, loading space volume: 9 m³, loading space length: 3,300 mm, loading space width: 1,750 mm, loading space height: 1,700 mm, maximum speed: 160 km/h, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, * Very well-maintained German vehicle from first owner * Vehicle ID No.: WV1ZZZSYZM9050796 * TÜV (roadworthiness inspection) valid until Technical specifications: * Wheelbase: 3,640 mm * Payload: 1,437 kg * Towing capacity: 3,000 kg Cargo area: * Length: 3,300 mm * Width: 1,750 mm * Height: 1,700 mm Special equipment: * Storage package 2 * Driver and passenger airbag, passenger airbag deactivatable * Tow bar: fixed ball head * Composition Colour audio system (radio/SD card interface/USB) * Exterior mirrors electrically adjustable and heated * Mounting rails for roof rack * Universal cargo area floor: wooden floor with longitudinally adjustable lashing rails * Roof vent in cargo/passenger compartment with closure * Driver assistance system: front and rear park assist * Vehicle without lashing eyes * Rear wing doors with glazing * “Climatic” air conditioning (driver’s cab) * Bulkhead with window * Side marker lights * Emergency call system * Digital radio reception (DAB+) * Spare wheel with road tires incl. vehicle tools and jack * Reversing camera * Hinges for rear doors with extended opening angle * Seat covers/upholstery: artificial leather * Seats in driver’s cab: double passenger bench with storage/compartment and fold-down backrest as table * Driver and passenger seats heated * Entry step rear right Dcedpox I N Tpefx Ac Nsc * Reinforced front left door hinges * High wooden trim in cargo/passenger compartment Standard equipment: * Anti-lock Braking System (ABS) * Drive type: front-wheel drive * Exterior mirror convex, left * Exterior mirror convex, right * LED indicators integrated in exterior mirrors * Rubber flooring in driver’s cab * Drag coefficient (CW value) underbody paneling * Dual headlights * Dual-tone horn * Entry grip on rear left post * Entry grip on rear right post * Electronic Stability Program (ESP) * Driver assistance: hill start assist * Driver assistance: brake assist (HBA) * Driver assistance: crosswind assist * Electric windows front * Laminated safety glass windscreen * (2) folding remote keys * 6-speed gearbox * Grab handles A-pillars * LED interior lights in driver’s cab * LED interior lights in cargo/passenger compartment * Body/build: standard box van * Body variant: standard roof * Fuel tank: 75 litres * Radiator grille with upper chrome strip * Adjustable steering column (steering wheel) * Headlight range adjustment * Commercial vehicle classification (truck registration) * Engine: 2.0 L - 103 kW TDI * Multi-function display Plus * Rear fog lamp * Wheelbase: 3,640 mm * Tire repair kit * Diesel particulate filter * Low emission according to Euro 6d-TEMP standard * Sliding side door cargo/passenger area right * SCR system (AdBlue technology) * Electro-mechanical power steering * Adjustable driver’s seat * Steel wheels 6.5x16 * Engine start/stop system * (2) 12V sockets in driver’s cab * Front bumper in grey * Daytime running lights * Driver’s side seat belt warning system * Electronic immobilizer * Heat-insulating glazing * Central locking with remote control and interior switch * Permissible gross vehicle weight: 3.5t Nationwide delivery across Germany available!!! Trade-in possible!!! Leasing and financing available with no down payment Subject to errors, misprints, and prior sale.

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Dedpfxoyf Hihe Ac Njcc Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: ready for operation (used), functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 6,288 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper + Winter Service Package, Single Previous Owner Comprehensive engine service including timing belt, water pump, oil, oil filter, and fuel filter will be performed free of charge upon sale. – Model equipped with new drive pedal system – 2,998 sweeping hours – 6,288 total operating hours – 63,760 kilometers – 4×4 all-wheel drive – hydrostatic all-wheel drive system Includes: • Kif snow blade type CM 1600, 1,500 mm wide (as new/never used in snow) or alternatively with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow), not shown in the pictures • Gmeiner salt spreader type Husky 500V FS with stand supports (as new/used twice for testing) • Camera system with 270° panoramic view • Debris hopper made of stainless steel Technical Data: – Wheelbase: 1,600 mm – Track width: 1,055 mm – Fresh water tank: 180 liters – Unladen weight: approx. 1,900 kg – Permissible total weight: 3,500 kg – Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm – Driving speed: 0–40 km/h – Working speed: 0–24 km/h – Noise insulation package – Selectable working speeds: 1,600 - 2,400 rpm (ECO/Standard/MAX) – Engine: water-cooled 4-cylinder VW industrial diesel engine Dcjdpfx Aeyf E Upec Njc – Low-emission Euro 5 – Fuel tank capacity: approx. 60 L – Hydrostatic all-wheel drive system – Dual-circuit high-pressure hydraulic system: Circuit 1 (front) 0–50/0–70 l/min at 225 bar, Circuit 2 (rear) 0–20/25/30 l/min at 195 bar – Hydraulic service brake via foot pedal – Cab with air-suspended driver seat – Air conditioning/heating – Water treatment system – Hydrant connector – Dosing system – Permissible total weight: 3,500 kg – Unladen weight: 1,950 kg Further applications possible through additional HAKO attachments such as brooms, snow plows, and lawn mowers (not included in scope of supply). Subject to errors, changes, and prior sale. We only sell in accordance with our terms and conditions and with exclusion of any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption, and on Saturdays by appointment. Outside these hours, appointments by phone are possible. We are happy to trade in your current used equipment or vehicle. Sales to businesses and exporters are given priority, which applies to our entire vehicle inventory. The above details are non-binding; errors, changes, and prior sale reserved!

Condition: ready for operation (used), operating hours: 6,288 h, functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweeper + Winter Service Equipment from First Owner • Comprehensive engine inspection with timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge upon sale • Machine version with new drive pedal system • 2,998 sweeping hours • 6,288 total operating hours • 63,760 kilometers • 4×4 all-wheel drive – hydrostatic all-wheel drive • Including Kif snow plough type CM 1600, 1,500 mm wide (as new/has never seen snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (as new/has never seen snow) – not shown in photos • Including Gmeiner salt spreader type Husky 500V FS with support stands (as new/used twice for testing) • Camera system with 270° panoramic view • Debris hopper made from stainless steel • Wheelbase 1,600 mm • Track width 1,055 mm • Fresh water tank 180 liters • Unladen weight approx. 1,900 kg • Permissible total weight 3,500 kg • Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm • Travel speed 0–40 km/h • Working speed 0–24 km/h • Noise insulation package • Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) • Engine: water-cooled 4-cylinder VW industrial diesel engine • Low emissions Euro 5 • Fuel tank approx. 60 liters • Hydrostatic all-wheel drive • Dual-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar • Hydraulic service brake via foot pedal • Cabin with air-suspended driver’s seat • Air conditioning / heater • Water treatment system • Hydrant connection • Dosing system • Permissible gross weight: 3,500 kg • Unladen weight: 1,950 kg • Other applications possible via additional HAKO attachments such as sweepers, snow ploughs, and lawn mowers (not included) • Errors, changes, and interim sale excepted We sell exclusively according to our terms and conditions and excluding any warranty. Errors, changes, and interim sale excepted. We are available Monday to Friday from 9:00 am – 5:00 pm without interruption, Saturdays by appointment, appointments outside opening hours can be arranged by telephone. We are happy to accept your current used equipment/vehicle as trade-in. Dcedjyf E T Sjpfx Ac Njc Sales to business customers and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding, subject to errors and interim sale!

Condition: ready for operation (used), operating hours: 6,288 h, functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 – One Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with newly implemented drive pedal system. 2,998 sweeping hours 6,288 total operating hours 63,760 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive transmission Camera system with 270° panoramic view Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0-40 km/h Working speed: 0-24 km/h Noise reduction package Selectable working RPM: 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emission Euro 5 compliant Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min, 225 bar - Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake operated via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water recycling system Hydrant connection Dosing system Perm. total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible through additional HAKO attachments such as broom, snow plow, and lawn mower (not included in the offer) Dsdpfx Asyf E Tloc Necc Subject to errors, changes, and prior sale. We sell exclusively according to our General Terms and Conditions and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday from 9:00 to 17:00 continuously, Saturday by appointment; appointments outside these hours can be arranged by phone. We are happy to accept your current used machine/vehicle as trade-in. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The information stated above is nonbinding; errors/changes and prior sale reserved.

Condition: ready for operation (used), functionality: fully functional, mileage: 54,192 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 5,990 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper + Winter Service Package from 1st Owner Major engine inspection with timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge upon sale Machine version with new drive pedal system 3,215 sweeping hours 5,990 total operating hours 54,192 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Including Kif snow blade, type CM 1600, 1500 mm wide (like new/has never been used in snow) or alternatively with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (like new/has never been used in snow); not shown in the pictures Including Gmeiner salt spreader type Husky 500V FS with support stands (in mint condition/used twice for testing) Camera system with 270° all-round vision Stainless steel debris hopper Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,900 kg Gross vehicle weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed 0-40 km/h Working speed 0-24 km/h Noise insulation package Selectable working speeds: 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive system 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Dcsdpfx Ajyf E H Eec Noc Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional attachments from HAKO such as sweeping brooms, snow plows, and lawn mowers (not included) Subject to errors, changes, and prior sale. We sell exclusively under our General Terms and Conditions and exclude any kind of warranty. Subject to errors, changes, and prior sale. We are available continuously Monday to Friday from 9:00 am to 5:00 pm; Saturdays by appointment. Outside these hours, telephone appointments are possible. We are happy to accept your current used machine/vehicle as a trade-in. We prefer selling to commercial customers and exporters; this policy applies to our entire vehicle inventory. The above specifications are non-binding. Subject to errors, changes, and prior sale!

Condition: good (used), Year of construction: 2007, Gildemeister NEF 600, year of manufacture 2007, Heidenhain Plus IT control, turning length 1100 mm, swing diameter Ø 600 mm, 8-position turret, VDI 40, tailstock dragged, spindle speed up to 3,000 rpm, chip conveyor, drag steady rest. Dsdpfx Ajyf Eupoc Necc

Condition: ready for operation (used), operating hours: 6,510 h, functionality: fully functional, mileage: 58,574 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper + Winter Service from First Owner Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,400 sweeping hours 6,510 total operating hours 58,574 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive Includes Kif snow plow, type CM 1600, 1500 mm wide (like new/has never seen snow), or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (like new/has never seen snow), not shown in photos Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) 270° surround view camera system Sweeping container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Dcjdpfx Asyf Etfoc Nec Working speed: 0–24 km/h Sound insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: Water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front): 0–50/0–70 l/min at 225 bar Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Further application options possible through additional HAKO attachments such as sweepers, snow ploughs, and lawn mowers (not included in the scope of delivery) Errors, changes, and prior sale reserved.

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz Dodpfx Asychzmjc Nocc

Condition: ready for operation (used), operating hours: 6,510 h, functionality: fully functional, mileage: 58,574 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Suction Sweeper Citymaster 1600 from 1st owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be performed free of charge upon sale - Machine version with new drive pedal system - 3,400 sweeping hours - 6,510 total operating hours - 58,574 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Camera system with 270° all-round visibility - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight approx. 1,900 kg - Permissible total weight: 3,500 kg - Dimensions (L x W x H): 4,510 mm / 1,210 mm / 1,970 mm - Travel speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds 1,600–2,400 rpm (ECO/Standard/MAX) Dcedpfjyf Eq Dsx Ac Noc - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emission Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - Dual-circuit high-pressure hydraulics: Circuit 1 (Front) 0–50/0–70 l/min at 225 bar, Circuit 2 (Rear) 0–20/25/30 l/min at 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - Versatile applications with additional HAKO attachments such as broom sweeper, snow plow, and lawn mower possible (not included in scope of delivery) - Subject to prior sale, errors and changes reserved We sell exclusively according to our General Terms and Conditions (GTC) and under exclusion of any warranty. Subject to prior sale, errors, and changes reserved. We are available Monday to Friday from 9:00 am to 5:00 pm non-stop. Saturday by appointment. Outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle as part of the payment. Sales to commercial customers and exporters are given priority. This applies to our entire vehicle stock. All details above are non-binding; subject to prior sale, errors and changes reserved!

Condition: ready for operation (used), operating hours: 6,043 h, functionality: fully functional, mileage: 53,114 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweep Suction Machine + Winter Service, One Owner Major engine inspection with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,131 sweeping operating hours 6,043 total operating hours 53,114 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive system Including Kif snow plow, type CM 1600, 1500 mm wide (as new/has never been used in snow) or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (as new/has never been used in snow), not pictured Including Gmeiner salt spreader, type Husky 500V FS with support stands (as new, used twice for testing) Camera system with 270° all-round view Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Gross vehicle weight 3,500 kg Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm Travel speed 0–40 km/h Working speed 0–24 km/h Sound insulation package Selectable operating speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: Water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Dcodpsyf Eimjfx Ac Nec Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics – Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other operational possibilities offered by additional HAKO attachments such as sweeping broom, snow blade, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale. We sell exclusively under our General Terms and Conditions and excluding any warranty. Subject to errors, changes, and prior sale. We are available continuously from Monday to Friday, 9:00 a.m. to 5:00 p.m., Saturday by appointment. Appointments outside these hours can be arranged by phone. We gladly accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale reserved.

Condition: ready for operation (used), functionality: fully functional, mileage: 53,114 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 6,043 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweep Suction Machine + Winter Service, One Owner Major engine inspection with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,131 sweeping operating hours 6,043 total operating hours 53,114 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive system Including Kif snow plow, type CM 1600, 1500 mm wide (as new/has never been used in snow) or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (as new/has never been used in snow), not pictured Including Gmeiner salt spreader, type Husky 500V FS with support stands (as new, used twice for testing) Camera system with 270° all-round view Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Gross vehicle weight 3,500 kg Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm Travel speed 0–40 km/h Working speed 0–24 km/h Sound insulation package Dodpsyf Egfjfx Ac Nscc Selectable operating speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: Water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics – Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other operational possibilities offered by additional HAKO attachments such as sweeping broom, snow blade, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale. We sell exclusively under our General Terms and Conditions and excluding any warranty. Subject to errors, changes, and prior sale. We are available continuously from Monday to Friday, 9:00 a.m. to 5:00 p.m., Saturday by appointment. Appointments outside these hours can be arranged by phone. We gladly accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale reserved.

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 01/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweeper and Winter Service Vehicle from First Owner Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be newly carried out by us free of charge upon sale. Machine version equipped with new drive pedal system 4,301 sweeping hours 8,211 total operating hours 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Includes Kif snow plow, type CM 1600, 1,500 mm wide (like new/never used in snow) or alternatively with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (like new/never used in snow) – not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS with support stands (as new–used twice for testing only) Rear-view camera Stainless steel debris hopper Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Gross vehicle weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive system Two-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver's seat Dcedpfx Aox Ir Snjc Nsc Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweepers, snow blades, and lawn mowers (not included) Subject to errors, changes, and prior sale. We sell exclusively under our terms and conditions and with exclusion of any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturday by appointment; outside these business hours, appointments can be made by phone. We are happy to accept your current used equipment/vehicle as a trade-in. Sales to businesses and exporters are given priority, this applies to our entire vehicle stock. The aforementioned details are non-binding; subject to errors, changes, and prior sale.

Condition: ready for operation (used), functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 01/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 8,211 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 suction sweeper and winter service vehicle from first owner Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge by us upon sale. Machine version with new drive pedal system - 4,301 sweeping operating hours - 8,211 total operating hours - 60,430 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow blade type CM 1600, 1,500 mm wide (as new/has never been used on snow), or optionally with Kif front brush type CM 1600, 1,300 mm wide, year 2019 (as new/has never been used on snow), not shown in the pictures - Includes Gmeiner salt spreader type Husky 500V FS with support stands (as new/used only twice for testing) - Rear-view camera - Stainless steel debris container Technical specifications: - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible GVW: 3,500 kg - Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel - Low emissions, Euro 5 - Fuel tank: approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min, 225 bar. Circuit 2 (rear): 0–20/25/30 l/min, 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible GVW: 3,500 kg - Unladen weight: 1,950 kg - Other application options possible with additional HAKO attachments, such as sweepers, snow ploughs, and lawn mowers (not included in the offer) Errors, changes, and prior sale reserved. We sell exclusively under our terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. Our business hours are Monday to Friday from 9:00 to 17:00, Saturday by appointment; outside these hours, appointments can be made by telephone. We are happy to accept your used equipment/vehicle as a trade-in. Sales to businesses and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale excepted. Dodpex Ir Txefx Ac Necc

Condition: new, Year of construction: 2025, functionality: fully functional, The iEcho PK-0705 Plus is a compact, fully automatic digital cutting plotter specifically designed for the graphic arts industry, packaging development, and advertising technology. It is the ideal solution for small to medium production runs where die-cutting is required without the need for expensive physical dies. Key Features: The PK-0705 Plus is an "all-in-one" system capable of cutting, creasing, and kiss-cutting in a single operation. Being digitally controlled, it eliminates the costs and lead times associated with conventional die-cutting tools. Applications: Labels, folding cartons, personalized packaging, stickers, POP displays, and greeting cards. Materials: Cardboard, corrugated board (E-flute), PVC sheets, sticker paper, and various plastics. Automatic Feeding System: The plotter is equipped with a vacuum feeder that automatically processes sheet stacks, enabling productive, unattended operation. Oscillating Tool (EOT): Unlike basic plotters, the Plus model features a vibrating knife, allowing it to precisely cut thicker or more rigid materials (up to 6 mm). Dcodpfx Aoyf D Egec Noc CCD Camera: A high-precision camera system automatically detects register marks on printed sheets for highly accurate contour cutting, even if the sheet is fed with a slight skew. Vacuum Table: Securely holds the material during cutting to ensure maximum precision. Working Area: 750 mm x 530 mm Max. Material Thickness: Up to 5 mm (depending on the tool) Tool Configuration: Oscillating knife, drag knife, creasing wheel Efficiency: No setup times required for die-cutting – simply load the file and start. Versatility: One device for a wide range of materials, from paper to thin rigid foam boards. Space-saving: Compact design fits into nearly any print shop. Summary: The iEcho PK-0705 Plus is a true workhorse for print shops seeking the flexibility to meet customer demands while maintaining the precision of an industrial die-cutting machine for small production runs.

Condition: good (used), functionality: fully functional, Year of construction: 2000, load capacity: 1,500 kg, platform length: 3,300 mm, platform width: 1,450 mm, Well-maintained GEDA construction hoist from first ownership: – Rack and pinion construction hoist GEDA 1500 Z/ZP – Platform type B, 3.30 x 1.45 m Dsdsyfxdkjpfx Ac Nocc – 1 loading door, 1 unloading flap – Suitable for up to 7 persons and loads – Load capacity 1500 kg – Lifting speed 12/30 m/min – Base unit GEDA 1200 ZP – Cable reel with drag cable approx. 50 m – Safety catch device – Steel masts with rack and pinion available upon request – Mast wall brackets on request – Landing gates on request – Possible accessories, see photos 9-11 – Year of manufacture: 2000, first owner – Good condition, little used – Sale from location Karlsruhe / Southern Germany – Inspection by appointment possible

Condition: used, Year of construction: 2010, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined Djdpfx Asybb N Iec Nocc • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Condition: used, mileage: 50,000 km, power: 130 kW (176.75 HP), first registration: 11/2017, fuel type: diesel, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, * Appointment Scheduling for Consultation and Test Drive = Shorter Waiting Times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we kindly ask you to make an appointment by phone for a consultation or test drive. * Non-smoker vehicle TRANSMISSION / CHASSIS * Body version: High roof in body color * Panel van APPEARANCE * Seat belt warning system (driver side) * Radiator grille with upper chrome strip * Front bumper in grey with trim in body color * Candy White * Alloy wheels LIGHT & VISIBILITY * Interior lighting in cargo/passenger compartment: LED * Interior lighting in driver's cab: LED * Exterior mirrors convex, left * Exterior mirrors convex, right * Headlight range adjustment * LED indicator lights integrated in exterior mirrors ENTERTAINMENT * Composition Audio system (radio, SD card interface, MP3 playback function) * Radio Composition Audio with TFT display * ECE region code for radio ASSISTANCE SYSTEMS AND SAFETY * Driver assistance system: Park Assist front and rear * Driver assistance system: Brake Assist (HBA) * Driver assistance system: Crosswind Assist COMFORT * Climatic air conditioning (driver's cab) * Drag coefficient underbody paneling * Seats in driver's cab: dual passenger seat with storage compartment * Seats in driver's cab: Comfort driver's seat * Glove compartment * Preparation for towbar (socket and wiring) * Heat-insulating glazing * Power sockets (12V outlets) in driver's cab (2x) * Without armrests, left and right exterior, in all existing seat rows in the passenger compartment * Storage package 2 OTHER FEATURES * High partition wall without window in cargo area * Grab handle on partition wall in cargo/passenger compartment * High wooden trim in cargo/passenger compartment * Fuel tank: 75 liters * Truck registration * Hinges for rear doors with enlarged opening angle * Laminated safety windshield * Rubber flooring in driver's cab * SCR system (AdBlue technology) * Side marker lights * Entry handle at rear left C-pillar * Perm. gross weight 3.50 t * Entry handle at rear right C-pillar * A-pillar grab handles * Engine 2.0 L – 130 kW TDI * Standard air filter * Operating voltage 12 V * Driver's cab doors * Without speed limiter * Without headlamp cleaning system * Bluetooth mobile phone interface * Daytime running lights * Sliding door right side cargo/passenger compartment * Driver assistance system: Hill Start Assist * 6-speed transmission * Low emissions according to Euro 6 standard * Diesel particulate filter * Engine start/stop system * Spare wheel (with matching tires), incl. on-board tool kit and jack * Body/build: Standard high roof panel van * Dual-tone horn * Wheelbase: 4490 mm * Premium interior noise insulation * Preparation for universal floor * Titanium Black/Titanium Black-Palladium/Pearl Grey * Electric terminal strip and pre-installation for function control unit * ME version 17 * Volkswagen Poznan Sp. z o.o., Wrzesnia * Completion of special equipment * Description not found * Dashboard with special fittings * Three-point automatic seat belts with height adjustment and electric belt tensioners in front * Spare wheel (steel rim) with matching tire * Alternator 250 A * DAVA * And much more The above information is provided without guarantee. It does not represent a warranted characteristic. Subject to errors and prior Djdpfxoyfkifo Ac Nocc

Condition: used, mileage: 34,645 km, power: 338 kW (459.55 HP), fuel type: gasoline, gearing type: automatic, first registration: 03/2022, next inspection (TÜV): 08/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, immobilizer system, navigation system, parking heater, ! Accident vehicle? Engine & transmission run perfectly, no limp mode!----Special equipment: Dedpfx Acsyduddo Njcc Ambient lighting, exterior/interior mirrors with automatic dimming, Alcantara headliner, roof rails, illuminated door sill guards with model designation (black brushed aluminum), driver assistance system: night vision assistant, driver assistance system: front and rear park assist incl. reversing camera and surround view, driver assistance system: lane change assist, floor mats, cruise control (tempomat) with adaptive distance control (extended), head-up display, rear window wiper, high-gloss black painted trim, inductive smartphone charging tray (wireless charging), interior: smooth leather, standard leather color, interior package with contrasting decorative stitching, front comfort seats incl. 14-way adjustment and memory package, comfort access (keyless entry), front and rear headrests with Porsche crest, heated steering wheel (additional option), alloy wheels front/rear: 10x22 / 11.5x22 (911 Turbo design wheels), Matrix LED headlights, tinted, incl. Porsche Dynamic Light System Plus (PDLS+), metallic paint, digital radio reception (DAB+), partial leather gear selector (Exclusive Design), Porsche lettering + model designation painted, Power Steering Plus (speed-sensitive), front seats with massage and ventilation function, front seat heating, soft close doors, BOSE sound system, Sport Chrono Package, auxiliary heater, tinted rear windows (privacy glazing) incl. sound-insulating heat-protection glazing, rear-axle steering Additional equipment: Passenger airbag deactivation, driver/passenger airbag, active bonnet, trailer stability program, anti-slip regulation (ASR), drive type: all-wheel drive, automatic brake differential (ABD), left exterior mirror aspherical, electrically folding exterior mirrors, electrically adjustable & heated exterior mirrors, exterior mirrors with LED surround lighting, LED indicators, brake calipers painted titanium grey, Connect Plus (Bluetooth, Apple CarPlay, Wi-Fi, vehicle tracking system), roof spoiler, anti-theft alarm system with interior monitoring, automatic headlight activation, stainless steel door sills, exterior package, driver assistance system: hill descent assist (PHC), driver assistance system: hill hold assist, driver assistance system: multi-collision brake, cup holders, tailgate with automatic opening and closing system, tinted LED tail lights, heated rear window, rear window wiper, cabin filter: activated carbon filter (odor filter), interior package: brushed aluminum, black, isofix mounts for child seat in rear, body: 4-door, keyless start, automatic climate control, knee airbag, head airbag system (curtain airbag), fuel tank: 90 liters, (sport/smooth leather, 3-spoke) multifunction steering wheel, adjustable steering column, automatic headlight leveling, mobile online services Android Auto, model designation on doors, engine 4.0L - 338 kW V8 Turbo CAT, engine drag torque control (MSR), multimedia USB ports in rear, non-smoker package, gasoline particulate filter (OPF), electric parking brake, stainless steel pedals, Porsche Active Suspension Management (PASM), Porsche Communication Management (PCM) incl. online navigation module, Porsche Torque Vectoring Plus (PTV Plus), Porsche Traction Management (PTM), wheel hub covers with colored Porsche crest, wheelbase 2895 mm, tire repair kit, tire

Condition: used, mileage: 117,681 km, power: 75 kW (101.97 HP), first registration: 09/2020, fuel type: diesel, next inspection (TÜV): 01/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable and shouldn’t be spent waiting. Therefore, we kindly ask you to arrange an appointment by phone for a consultation or test drive. * Service booklet * Non-smoker TRANSMISSION / CHASSIS * Suspension and damping, standard DESIGN * Bumpers in grey * Candy White * Comfort headliner at the front * Side protection strips Dcodpfx Acsydtmwe Noc LIGHT & VISIBILITY * Light and Visibility package * Automatic dimming interior rear-view mirror * LED interior cab lighting * Daytime running lights with auto headlight switching, leaving home function, and manual coming home function * Exterior mirror, convex, right * Exterior mirror, aspherical, left * Third brake light * Rear lights ENTERTAINMENT * 4 speakers * App-Connect ASSISTANCE SYSTEMS AND SAFETY * Driver assistance system: Multi-Collision Brake * Seatbelt warning system for front seats COMFORT * Door trim and armrest in plastic * Standard side trim in passenger compartment * Standard acoustic package for cab * Lockable and illuminated glove compartment MISCELLANEOUS * Body type: panel van * Body modifications for increased safety requirements * Truck registration * Equipment package: BlueMotion Technology * Rear window with opaque film * Engine drag torque control (MSR) * Engine 2.0 L – 75 kW TDI * Operating voltage 12 V * Diesel engine 2.0 L/75 kW TDI common rail base engine: T29/TQ4/T0P/T6M * 4-cylinder diesel engine 2.0L Aggr. 04L.E * Instrument cluster (km/h), displays for speed, total/trip mileage, RPM, fuel level, and time * Exterior mirrors, car version * On-board documents in German * Heated windscreen * Audiosystem Composition Media (touchscreen, radio/CD player, MP3, Bluetooth) * Multimedia interface USB (iPhone / iPod) with AUX-IN * Bluetooth interface for mobile phone * Air conditioning * Daytime running lights * Sliding door on the right * Brake assist * Driver assistance system: hill start assist * 5-speed gearbox * Start/stop system * Diesel particulate filter * Windscreen wipers with rain sensor * Rear parking aid * Rear wing doors with windows and opaque film * Halogen H4 headlights * Interior filter: dust and pollen filter * Wheelbase 3006 mm * Standard payload * Payload 730 kg * Badging for type/model designation * 15" chassis * Interior lighting in passenger/load compartment, 1 light * Mass lead for B.U.S. * Volkswagen Poznan Sp. z o.o., Poznan * Special installations by Customized Solution (manufacturing location Poznan) * Radiator grille, black textured, with chrome strip * Radio Composition Media with 4 speakers * High partition wall with mesh, for vehicles with up to 730 kg payload * Rear wing doors with windows, interior covered with opaque film, asymmetrically split * DFSD * Description not found * and much more * The above details are without guarantee. They do not represent agreed characteristics. Errors and prior sale reserved. * Our services: * Financing possible with or without down payment * Registration service * Trade-in of your used vehicle * Delivery possible * Tyre service – winter and summer tyres available at extra cost * We also speak several languages: * English, French, Spanish, Italian, Russian, Turkish

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer * Easy Checker Dedpfx Acjwcagco Nocc * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Mid-mount mower deck: * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, total height: 300 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 Dedsyap S Ijpfx Ac Nscc • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm turning speeds: 3500 1/min Dcsdjt Acy Aepfx Ac Nec turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours *