Road sweeper

MTD 16 /102E/165

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm Djdpjt Ii Rrofx Ab Tjwf -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Dual tread, Weight system, Fire extinguisher, Equipment: lighting, TCM FD80 from Uniktruck Dedpfx Ajrk Rd Njb Towf

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Dedpsifk Rbofx Ab Tjwf Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Dwsdpfx Absd Dtuhs Tsf Year of manufacture: 1985 Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 Dwodpfevzhiwex Ab Tof - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine

Condition: as good as new (ex-display), Heating: steam Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Corpus height: 264 cm Min. room height: 320 cm Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Dwedpfxophnz Ns Ab Tof Smoke generator width: 50,0 cm

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Djdoxdt Umjpfx Ab Tewf Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Dwjdjtp N Ddepfx Ab Tsf

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Dwjdpfxei Atnxo Ab Tsf

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz Dwodpfx Ajd Hxx Ajb Tef - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.