Used Lathes for sale (5,484)

Condition: ready for operation (used), controller model: CNC, empty load weight: 70,000 kg, total length: 10,000 mm, total width: 3,230 mm, total height: 1,900 mm, swing diameter over cross slide: 6,000 mm, Geharde draaibank met 4 geharde lineaire geleidingen Fedpfowaivhsx Adpofw Gewicht van het werkstuk tussen de centers: 20 ton Siemens aandrijvingen en motoren Heidenhain-linialen en encoders Super Lathe-principe/licentie van Binns Machinery (VS). De ultieme prestaties voor zware draaibanken, bedoeld voor staalfabrieken, walsgieterijen en smederijen voor de productie van producten zoals turbinerotoren, grote assen en staafproductie. Meest opvallende verschillen met een normale draaibank: veel breder bed = zeer hoge stijfheid = geen trillingen meer zwaar en omvangrijk vervoer ook voor stijfheidsdoeleinden zware werkstukken kunnen tussen de centers worden geplaatst het totale gewicht van de rollenbank is erg hoog Swing over bed: 1200 mm Swing over cross-slide: 850 mm Power on the spindle: 165 kW Number of speeds: 3 > 320 rpm

Condition: ready for operation (used), 3 guideway flat bed lathe - heavy duty 2 steadies are included Distance between centers: 6100 mm Ffsdpfxjyl A Duo Adpow Swing over bed: 1500 mm Swing over cross-slide: 1320 mm Swing in gap: 2000 mm Diametre of main spindle bore: 102 mm Number of speeds: 4 > 180 rpm

Condition: ready for operation (used), empty load weight: 22,000 kg, Type FTC75 Ffsdowkw Umepfx Adpsw Distance between centers: 8000 mm Swing over bed: 1500 mm Swing over cross-slide: 1100 mm Diametre of main spindle bore: 130 mm Number of speeds: 3,6 > 720 rpm Total power needed: 29,5 kW / 40 hp Max weight between centers: 11 ton

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Machine: MEXPOL TUB 660 x 3000 mm with infinitely variable spindle speeds via frequency converter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Fodpfx Adjyr Dmkjpefw Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle mount: DIN 55027/11 Spindle speed range: 9 – 1320 rpm Main drive: 15 kW Feed: Longitudinal feed: 0.039–18 mm/rev, Cross feed: 0.02–9 mm/rev Rapid traverse: Longitudinal: 3800 mm/min, Cross: 1900 mm/min Tailstock: Quill diameter: 105 mm, Stroke: 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard accessories: Frequency converter Quick-change tool post, size C Coolant system Interlocked chuck guard Lighting Set of change gears CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediately available from stock (while stocks last)

Year of construction: 2024, operating hours: 1,400 h, condition: ready for operation (used), - USED - 4-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 910 mm MAX ROTATING DIAMETER: 800 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-22 kW; ASA A2-8" X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: ± 55 mm Z-AXIS TRAVEL: 750 mm RAPID FEEDS X-Z: 24 - 18 m/min DRIVEN TURRET HEAD: 12 ; BMT65 POS; 6000 rpm; 5,5-11 kW HIGH PRESSURE COOLANT: 20 Bar CONTROL UNIT: FANUC 0i-TF WEIGHT: 7300 Kg OVERALL DIMENSIONS: 4526 x 2152 x 2335 mm ACCESSORIES: AUTOMATIC TAILSTOCK ; Ffjdpfxsyfivwe Adpjw SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; PORTABLE HANDWHEEL NOTE: COMPLETO DI: N.9 UTENSILI FISSI; N.1 UTENSILE MOTORIZZATO RADIALE; N.1 UTENSILE MOTORIZZATO ASSIALE

Condition: used, 15” chuck + C axis live tooling Maximum swing (mm): Ø800 Maximum turning length (mm): 600 Maximum turning diameter (mm): Ø550 Spindle speed (rpm): 2,000 Live tooling (4 pcs axial) Chip conveyor Ffedpjyr Dixefx Adpow FANUC 21i TB CNC controller Year of manufacture: 2010

Condition: used, Year of construction: 2021, operating hours: 7,600 h, turning length: 210 mm, spindle speed (max.): 12,000 rpm, overall weight: 3,700 kg, total width: 1,400 mm, total length: 2,300 mm, total height: 2,000 mm, bar diameter (max.): 20 mm, Equipment: documentation/manual, Technical details: - Used WECO S206E-II - Operating hours: 7,600 - Control: Fanuc - Bar capacity: Ø 3 mm up to max. Ø 20 mm - Maximum machining length: 210 mm - Main spindle / sub-spindle drive power: 3.7 kW / 2.2 kW - Spindle speed: 12,000 rpm Further details can be found in the PDF data sheet. Ffsdpfx Adexmigkjpjw The machine is sold with the following equipment: - IEMCA Smart 320 bar feeder - Chip conveyor - Fire extinguishing system Kraft & Bauer - Thread whirling unit The machine is in very good condition and can be inspected under power by appointment.

Condition: good (used), Year of construction: 2008, Fagor digital display Centre height over bed: 290 mm Swing diameter over bed: 580 mm Distance between centres: 1000 mm Spindle speed: 20 - 2000 min⁻¹ Tailstock Multifix system Fedeyn Sqpepfx Adpjfw

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm Fedpfowp Tckox Adpefw 55 mm 315 mm 2700 U/min D1-6 DIN 55029 73 mm 140 mm

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm Ffsdpfxoyn R Exo Adpsw spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,8 x 1 x 1,4 m With Multifix holder, chuck und chuck safety cover.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm Ffjdpeydqpijfx Adpew spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock. Ffedpfex Hpyyjx Adpsw

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Ffsdpfx Adeyn Ravjpew

Condition: used, NAKAMURA-TOME WT-150 is a high-precision CNC turning lathe designed for accuracy and reliability. Capacities: swing over cross-slide 310 mm, spindle bore 51 mm, turning length 255/755 mm; X 207.5 mm; Z 300 mm; Y 2×±30 mm. Specs: 2 spindles, 2 turrets with 12 positions and driven tools, spindle speeds 60–6000 rpm, spindle power 7.5/5.5 kW, driven tools 3.2/2.7 kW, rapid traverse X=12/Z=40 m/min, 3×400 V 50 Hz, weight ≈8500 kg, dims 3850×2330×2320 mm. Accessories: lamp, high‑pressure coolant, parts catcher, chip conveyor, foot pedal, set of toolholders/steel supports. Achieves tight tolerances; suited to automotive, aerospace, medical and tooling. Ffsdpfx Adsyn Raiepew

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Ffodpoyn Nuxjfx Adpsw TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max.): 8,000 rpm Bar capacity: 25.4 mm Centre distance: 445 mm Spindle distance: 485 mm X-axis travel: 100 mm Z-axis travel: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm MACHINE DETAILS Control system: FANUC SERIES 18i-TB Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A EQUIPMENT Tailstock Main spindle 12-position tool turret Driven tools (6 units) Y-axis

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Ffedjyn Nlkepfx Adpew

Year of construction: 2023, operating hours: 3,635 h, condition: used, machine/vehicle number: 22260005, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Ffsdpfx Adjyn Nl Depew

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Ffedpfx Adjyn Nkyspsw

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Fodpfx Adsyn Nktepsfw

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Ffjdpfx Adsyn Nkmepow

Condition: used, Year of construction: 2004, Type: CNC Lathe Make: Daewoo Model: Lynx 210 Year of Manufacture: 2004 Fjdpfx Asyn Hkwedpofw Condition: Used Quantity: 1

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10071775, center height: 150 mm, overall weight: 100 kg, rotational speed (max.): 3,300 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Speed: from 400 to 3,300 rpm Distance between centers: approx. 400 mm Center height: approx. 150 mm MACHINE DETAILS Fodsyn Hz Nepfx Adpsfw Operating voltage: 230 V Frequency: 50 Hz Rated current: 2.5 A Connected load: 0.56 kW Dimensions & Weight Dimensions (L x W x H): 850 x 300 x 440 mm Weight: 100 kg External reference: Training workshop – Lot 3

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Ffjdpfx Adeyn Em Ropsw Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 75740 € 1431.49 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software Fjdpfswirn Sox Adpefw leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 74 340,00 mm € 77 240,00 mm € 80 240,00 mm € 83 340,00 mm € 86 340,00

Condition: used, CITIZEN CINCOM M 32 is a CNC automatic lathe / CNC Swiss type lathe delivering high precision, excellent accuracy and reliability. Working capacities: max. turning diameter 32 mm, maximum turning length 600 mm. Key technical specifications: rapid traverse 25 m/min; voltage 50 Hz 3x 400 V; machine weight about 3200 kg; overall dimensions LxWxH: 2800 x 1370 x 1790 mm. It achieves tight tolerances and is suitable for applications in watchmaking, medical, automotive, aerospace and machine tool industries Fjdpfx Asyn Eifjdpsfw