Used Lathe Lesto for sale (5,521)

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 700 mm turning diameter over support: 350 mm turning length: 3000 mm center height measured in bed: 320 mm spindle bore of work spindle: 70 mm spindle speed max.: 10 - 1250 / 24 step U/min cross feed: 0,0256 ... 0,378 mm/U longitudinal feeds:: 0,064...1,025 mm/U tailstock quill adjustment:: 240 mm tailstock taper MT: MK5 total power requirement: 14,0 kW weight of the machine ca.: 5,0 t dimension machine xH: 5,1 x 1,8 x 1,6 m Travel Support: Support lengthwise=3000mm Support transverse=400mm Tool support=220mm Tool slide can be swiveled 90° right/left Equipment: digital path measuring device Heidenhain Pgedpfx Adsu Trb Ajnow 4-fold tool holder machine lamp Coolant device with pump Accessories: 1x steady rest open 160mm and 1x steady rest closed 400mm 3-jaw chuck Ø 335 with soft jaws 18 sets of used, soft jaws *

Condition: excellent (used), Vise for lathe Pjdpsf Dx R Ajfx Adnsgw Jaw width 100 mm maximum opening width 100 mm vertical adjustment 100 mm Total height 300 mm

Condition: new, Centre distance ----- 2000 mm Centre height ----- 250 mm Swing diameter ----- 500 mm Spindle bore ----- 80 mm Bed width ----- 405 mm Spindle speed ----- 9-1600 rpm Motor ----- 7.5 KW HEAVY-DUTY DESIGN - WEIGHT 3250 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change toolpost type Multifix TOOC3 with 4 holders * 3-jaw chuck 325 mm * 4-jaw chuck 400 mm * Faceplate Pgedpfx Aexz Si Rednow * Fixed and travelling steady rest * LED work lamp and cooling system * Box with various tools

Condition: used, For sale: Czechoslovakian TOS lathe, model SN 55 B, as shown in the photos. The machine has undergone a minor inspection. I would rate its condition as good plus. Loading at the site is provided. The machine is connected, in working order, and ready for testing. Technical data: Minimum spindle speed: 10 RPM Pgodpfx Aoxyu Adsdnow Maximum spindle speed: 1000 RPM 16 spindle speeds Spindle bore: 76mm Chuck diameter: 315mm Turning length: 2000mm Swing over bed: 560mm Swing over cross slide: 280mm Removable bridge Quick-change tool post 4 inserts for tool post Right and left jaws Large and small steady rest Half steady rest

Condition: good (used), Year of construction: 1996, Weiler lathe Pgodpjvbwd Refx Adnsw Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Pgjdpoxz R Iljfx Adnow It is included barfeeder.

Condition: used, Technical details: Podpowa Nwfofx Adnogw turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: like new (used), Year of construction: 2024, – Distance between centers: 1000 mm – Swing over bed: 358 mm – Swing over cross slide: 502 mm – Swing over support: 179 mm – Spindle bore: 52 mm – 30/2300 rpm – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes (2-axis DRO) – Brake – Cooling – Multifix with 4 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V Pedpfx Ajxz Rg Uodnsgw

Condition: new, Center length ----- 2000 mm Center height ----- 330 mm Turning diameter ----- 660 mm Main spindle passage ----- 105 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 KW HEAVY DUTY VERSION - WEIGHT 4080 KG Pgodjga T Acepfx Adnew INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 rungs * 3 Chuck 325 mm * 400 mm chuck * 630 mm chuck * Fixed and moving glasses * LED work light and cooling system * Box with various tools

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm Pgsdpfx Adevtthionow face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] EQUIPMENT - CNC : OKUMA OSP-P200 LA Pedsxz Hrgjpfx Adnogw - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Condition: used, Year of construction: 1959, turning diameter over bed 460 mm turning diameter over slide rest 280 mm turning length 1000 mm centre height 230 mm 720 mm spindle bore 53 mm spindle turning speed range 28 - 1250 U/min Pedpfx Adsxpi A Dsnogw total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center

Condition: ready for operation (used), Year of construction: 2001, operating hours: 41,000 h, functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe in perfect working order Year 2001 and maintained. Very reliable machine (in 20 years, spindle and clamping pot have been rebuilt once and hydraulic accumulator) HEIDENHAIN Turn Plus IT CNC (conversational and ISO) 12-station VDI 30 turrets Very precise and rigid, suitable for quality 5 (Heidenhain scale on the X axis) Chip conveyor Part catcher arm, diameter 66, length 100 Hydraulic counterspindle (pedal) 400/400V isolation transformer 210mm hydraulic Autoblock chuck with pressure compensator (for clamping thin parts) 66mm spindle bore Pre-equipped bar feeder 41,000 operating hours (see hour meter) All original documentation and invoices (few). Podpfowb Eqdex Adnogw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine Type: CNC Turning Machine Manufacturer: Okuma Model: LU300-2ST Year of Manufacture: 2005 Control: OSP-E100L Availability: In stock Machine Equipment: - Parts conveyor belt and collection tray – workpiece chute with removal conveyor, including electrical kit - 2 turret disks with VDI40 (12 + 8 stations) - Power chuck cylinder for hollow spindle – pull tube bore 52 mm - Expansion kit “D” – Kit one-touch IGF-D - Chuck open/close while spindle is running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched on/off at turret A and B via M-function - Interface for bar feeder connection - Chip conveyor Technical Details: - Swing over bed: 530 mm - Swing over cross slide: 380 mm - Distance between centers: 600 mm - Max. turning diameter: 370 mm - Max. turning length: 600 mm - X-Axis travel: upper 260 mm / lower 140 mm - Z-Axis travel: upper 640 mm / lower 615 mm - Rapid traverse X-Axis: 20,000 mm/min - Rapid traverse Z-Axis: 25,000 mm/min - Spindle speed: 45 ~5,000 rpm Pjdpfoxz Eqbox Adnjgw - Spindle bore: 62 mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions (L x W): approx. 2950 x 2050 mm - Machine height: approx. 2010 mm - Weight: approx. 6,500 kg Options: - Organization and execution of transport - Machine installation and placement - Machine commissioning

Condition: good (used), Year of construction: 2010, Conventional lathe, center high 254 mm, between centers 1000 mm, bore Ø 80 mm, 12 speed 30 - 2200 rpm, motor 5,5 kw, camlock 6'', dimensions 230x115x165 cm, weight ca. 1750 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck Ø 250 mm, rotating pin, tool post MULTIFIX C with toolholders, steady and following rest Pedpfx Aetv Iy Eodnegw

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Pgedpfexz Edzex Adnew

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, For sale: used Gildemeister N.E.F Plus 500 lathe The machine is operational, has been decommissioned, and stored in dry conditions. Complete documentation available 3-jaw chuck 4-jaw chuck Various tool holders Chip tray and coolant pump included Pgjdpfx Adoxz Dqyonow Technical data – see image

Condition: new, Year of construction: 1970, turning diameter over bed 540 mm turning diameter over slide rest 365 mm turning length 2000 mm turning diameter in the gap 800 mm turning speeds 18 - 1400 U/min centre height 270 mm spindle bore 90 mm total power requirement 11,0 kW Psdpfsxpiz Tox Adnogw weight of the machine ca. 2,6 t dimensions of the machine ca. 3,7 x 1,4 x 1,8 m - Multifix Size B - 3-Jaw Chuck 315mm - Chuck Guard - Emergency Stop Device - Foot Switch - Chip Tray - Centering Center

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex site: CNC Lathe Gildemeister Model CTX 500 E Year of manufacture 2000 Pgedpjxzzn Aefx Adnjw Swing over bed 670 mm Swing over cross slide 455 mm Spindle bore 92 mm Centre distance 1000 mm Cross travel 320 mm Longitudinal travel 1080 mm Drive power 23 kW Spindle speeds 18 – 3600 rpm CNC control Heidenhain 3190 Turret 12 positions Driven stations 6 Quill diameter 120 mm Quill stroke 120 mm Chuck Berg 315 mm Y-axis plus/minus Plus 5 driven axial tools, 3 driven radial tools Chip conveyor Weight 10.5 t Offered at EUR 13,500.— plus VAT ex site

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 220-15, turning diameter over cross slide: 290 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, quill diameter: 80 mm, quill travel distance: 160 mm, center height: 255 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 2 rpm, spindle speed (max.): 2,800 rpm, feed length Z-axis: 1,500 mm, bed width: 360 mm, total length: 3,330 mm, total width: 1,550 mm, total height: 1,790 mm, mount diameter: 300 mm, type of input current: three-phase, spindle motor power: 15,000 W, travel distance cross slide: 265 mm, overall weight: 3,300 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,800 rpm, three-jaw chuck diameter: 250 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 250 mm, The machine is ready for immediate use. The axis module and main spindle module were replaced in 01/2025 with fully overhauled modules, and all cables from the saddle to the control panel were renewed. The machine guides are in good condition, and fits in the H-5 range are not an issue. Accessories include an original steady rest, wedge-bar three-jaw chuck Röhm 250, and a Multifix quick tool changer size C. Pgedsxzzluspfx Adnew

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Pgedpfx Aevri I Asdnsw Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: excellent (used), Year of construction: 2017, operating hours: 901 h, functionality: fully functional, Controller HAAS (15 inch LCD screen, USB, 1 Mb Programspeichern, Ethernet, IQS, VPC) Chuck dia D210 mm Swing dia over bed 419 mm Max. turning dia D279 mm Max. turning length 406 mm X travel 305 mm Y travel +/-51 mm Z travel 406 mm Spindle bore D88,9 mm Max. bar diameter D64 mm C axis 0,01 degree Spindle speed 4000 rpm Spindle nose A2-6 Pedpfxexylx Ne Adnogw Max. driven tool speed 6000 rpm Rapid speed X/Y/Z = 12 / 12 / 30,5 m/min. Spindle power 14,9 kW Turret Hybrid 6 x BOT / 6 x VDI40 - 12-fold Tailstock sleeve MT3 Tailstock sleeve D95 mm Tailstock travel 508 mm Power required 400V, 40A Weight 3600 kgs Dimensions LxWxH = 3200 x 1540 x 1803 mm Accessories, features - C axis programmable - Y axis - Driven tool turret (all positions) - Integrated tool presetter - Chip conveyor - 3 jaws chuck D210 mm - Tailstock - Makros and software options - Tailstock The machine can be fine in very good condition (only 900 feedrate hours).

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Pgjdpfx Adocnxrcjnow Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: excellent (used), Second-hand wood lathe, Killinger KM 1000 S - Very good condition - Motor 0.75 kW / 230 V Pgsdpfer Eltcox Adnsw Center width 1000 mm and center height above the bench bed 200 mm Accessories: - Center punch - Turning iron (see photos) - steady rest - face plate - Tailstock - Hand rest - 8 speeds Location: From stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Pgedpfxew Hl Ade Adnsw Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Location: in stock at 54634 Bitburg - immediately available -