Used Laser Welding Systems for sale (41,675)

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Ppjdpfezdqkrsx Aaheu Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) Psdpszdn T Refx Aahopu (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Year of construction: 2023, functionality: fully functional, Welding booth with robot, welding power source and controller for welding small workpieces Components as new, suitable for salvage (1) Crede Welding System (Unit price EUR 60,000) consisting of: - T13 Controller for controlling 2 welding stations - LT 5000A Power Unit - Cooling unit - 2x split seam welding heads SSK Ppsdsvwz Huepfx Aahju (2) Robot KUKA KR 20 R1810-2 (Unit price EUR 20,000) with: - Ethercat communication to external Beckhoff PLC - Diagnostics Safety 3.2 - SafeOperation 3.6 - GripperSpot Tech 5.0

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Pjdozfaarjpfx Aahspu

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Ppjdpfozbvn Eex Aahou Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration Pjdpsn Sl Dbofx Aahepu - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Psdjzcf T Tjpfx Aahopu Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: cooling unit, Trumpf HL 1003D laser unit Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. Ppodpowxq H Esfx Aaheu 2 optics with cameras.

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Psdpfxjy D Nlqs Aahepu Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and mounting Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message appears indicating that the fiber optic cables need to be checked. According to the previous owner, however, this is related to the water circuit.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) Ppsdped N Hguefx Aahou focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Ppsdpjyrgu Rsfx Aahou Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2019, condition: used, Technical details: Podpfxou N Auuo Aahjpu control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, Ppedpfxjy Ucnae Aaheu battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Ppodpfx Ajumi Stjaheu Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Ppsdpfjwypqlex Aahju Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Psdofkpamspfx Aahspu Focusline

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Pedpfx Aexf Up Isahopu

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Pjdpfxsy R Sc Ej Aahspu Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Technical Specifications: Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Ppedpfx Aoyztpboahju Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026. Podsy T N Htjpfx Aahepu

Year of construction: 2010, condition: ready for operation (used), Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement. Ppjdpfx Aaoy T N Iwshju

Year of construction: 2004, condition: excellent (used), EOSINT P730 LASER SYSTEM Ppjdpfsy N Uraex Aahju Year: 2004

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Ppjdpjy N Duqofx Aaheu Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Ppodpfxsyx Exve Aaheu

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit Pjdpfxeixxqke Aahopu The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. *