Used Laminate Cutter for sale (3,607)

Condition: like new (used), Bowl cutter Manufacturer: Seydelmann adjustable knife speeds 2 mixing speed 2 separate bowl speeds Completely made of special stainless steel Bodoxulikjpfx Abbewh 200 liters bowl volume made of stainless steel Dimensios: 300x250x200cm Power: 110 kW Net weight: 2880 kg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Bwsdpfxewxxdfj Abbjh Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device Bwodpjvbifgsfx Abbjh To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Bedjxt N Izopfx Abbjwh Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Bwodpfx Aew Rrv Rjbbsh

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills Bwedjxdh Hqepfx Abbjh • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size. Bsdsxcg H Hspfx Abbowh

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. Bwodpfx Abow Sy Ahobeh -- PRICE IS PER PIECE --

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. -- PRICE LISTED IS FOR 1 PIECE -- Bedpfx Aew Sy Anobbjwh

Condition: excellent (used), Tool holder from the renowned brand WNT, precision-made, G2.5 balancing up to 25,000 rpm – designed for HSC/HPC machining. Clamping diameter Ø5 mm, length 80 mm. Includes a VHM (solid carbide) end mill. Very good condition. Bwjdpfx Abow Rrutobjh

Condition: good (used), IBICO IL12HR PROFESSIONAL LAMINATOR. Bodpfx Ajufgn Iebbswh

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Bwodpfx Asuhm Rbebbeh Shears very good condition.

Condition: used, Bäuerle universal tool grinding machine for woodworking and metalworking tools. Bwsdpfxoxytmuo Abboh

Condition: used, Year of construction: 2004, Back Coating Line Laminating Machine FRIZ, type Profi FBS 130, year 2004 Bwsdpeyay Rusfx Abbsh

Condition: used, Powerflex IV Thread Cutting Machine, Thread Cutter M8 - M27 Bsdpfsq U Sfpex Abbswh 75 rpm - 900 rpm Reach: max. 1200mm radius Year of manufacture: 2008 You are welcome to schedule an inspection appointment. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Bodpfox Nawnjx Abbswh Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Bwedpfx Abov Igghsbeh Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Bjdov Igg Ijpfx Abbjwh Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Bedpfx Abjwdutmobswh Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Bwodpfxeud Axgo Abbjh

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual Bjdjdzqnyjpfx Abbowh - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2011, working width: 1,700 mm, total length: 18,000 mm, roll diameter: 1,400 mm, For sale: coating machine for paper, cardboard, or film using solvent-based or water-based adhesives. The machine is in perfect condition and in continuous production. Coating and laminating line for paper and film, Jiangnan TB 1620, year of manufacture: 2011. Machine name: COATER Manufacturer: RUIAN JIANGNAN MACHINERY Co. Ltd CHINA Model: TB 1620 Year of manufacture: 2011 Serial number: 751 Bwjdpeyabzbofx Abboh Working width: 1700 mm, material in rolls Raw material: paper (50-300 g/m2), film (0.023-0.10 mm) Adhesives: solvent-based adhesive, water-based adhesive Coating type: Mayer rod, anilox roller, slot die roller Dryer: 18 m long, 7 drying sections, temperature 30°C-170°C, gas heating (blower) Maximum roll diameter: 1400 mm Also suitable for simultaneous lamination. The machine is in perfect condition and in continuous production. For questions or further information, please send a message or contact us by phone.

Condition: excellent (used), AFT Sandwich cutter Serial: 135012 Bsdsfv Spnspfx Abbswh Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Bwsdpfxerwz I Ae Abbeh

Condition: excellent (used), NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h, Bwodswtilpjpfx Abboh