Used Laminate Cutter for sale (3,648)

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Bjdpeydkhfofx Aafjlc Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Year of construction: 2025, condition: like new (used), functionality: fully functional, For Sale: 4 pieces of new spiral planing heads D 140 x 240 x 40 Z=6 Used only once as a demo, now available at a special price! Act fast and secure these high-quality spiral cutterehads heads that will revolutionize your woodworking projects. Bsdpfsydk Tbsx Aafjlc Don’t miss out on this opportunity, 60% of new price

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual Bsdeydkgnspfx Aafolc – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Kama TS 74-60 Automatic Die Cutter One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Machine serviced and maintained on time. Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Blsdpoydkgbefx Aafsc Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation.

Condition: good (used), Set of 2 Leitz Heliplan Spiral Cutterheads bottom/top 125 x 310 x 40 with pre-drilling, aluminum Bsdpfoydk Swex Aafelc on Powerlock adapter 8000 rpm max Can also be used without Powerlock on a 40 mm spindle

Condition: good (used), Tecnomac Sprinter 76 Automatic laminating machine The most efficient machine on the market from a legendary manufacturer. It is an advanced machine with high efficiency thanks to an external heating thermostat. Production Italy. Technical data: Max sheet size: 760mm x 1040mm Min sheet size: 210mm x 210mm Min weight: 120 gsm Max grammage: 400gsm Operating temperature: 80-145°C Max working speed: 40m/min Weight: approx. 1800 kg Power supply 380V Additionally, air 8 Bar A steel, chrome-plated cylinder with a large diameter, filled with water for greater operational stability. Pneumatic pressure, separation and automatic feeding. Bsdpoydkd Tsfx Aafelc Adjustable pressing force. Feeding from a high stack, Spiess type feeding head Expanding roller for attaching the foil. Sheet straightening module.

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Bodpfx Aeydk Rysafolc Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 240 mm Price: 500 Euro

Condition: excellent (used), functionality: fully functional, Format 880/640, pneumatic clutch Bjdpfx Aaoygl Ulsfslc

Condition: good (used), functionality: fully functional, machine/vehicle number: S11-016, We are selling our Deckel S11. The machine is operational, and a digital readout can optionally be purchased as well. Bjdpew A Rrvjfx Aafolc

Condition: used, Year of construction: 2004, functionality: fully functional, Lisec / ATL-60/30BF + ESL-60/30RS-S + VB45 + BTH-60/30 R-L Combi - float and laminated glass cutting Float and lami cutting line R-L Bledpfxewii A Tj Aafoc Loader ATL-60/30 Float cutting ESL-60/30RS-S Lami cutting VB45 Breakout BTH-60/30

Condition: used, functionality: fully functional, Year of construction: 2019, Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight Bodpfxswarqzs Aafolc

Condition: ready for operation (used), functionality: fully functional, Cutter Stephan VM/MC 600/20 Bljdpfsx Hyp Ssx Aafoc The Stephan VM/MC 600/20 Cutter is designed for workshops seeking an industrial machine capable of producing fine emulsions, homogeneous pastes, or complex preparations with high consistency. With its 600-litre bowl, it handles large volumes while ensuring perfect control over the final texture. Additionally, its vacuum operation enhances ingredient binding, intensifies natural colour, and reduces oxidation. As a result, products achieve a smoother, more stable structure that meets the demands of high-standard manufacturing. The robust stainless-steel frame and the mechanical design of the main knife ensure outstanding durability, even in intensive production environments. The 20 kW motor delivers ample power to process dense masses, guaranteeing consistent results, even during long production runs. Furthermore, easy access to components facilitates maintenance and reduces downtime, improving production continuity. The tilting bowl system allows for quick unloading, reducing product loss and speeding up recipe changeovers. The Stephan VM/MC 600/20 Cutter is suitable for a wide variety of products: cooked or raw sausage meat, processed cheese, fillings, sauces, plant-based preparations, or pastry products. Its integrated safety system ensures reliable use, while the option for automated operation simplifies daily supervision. Thanks to its versatility, power, and the high quality of the finished product, this cutter is an essential tool for industrial facilities looking to stabilise production, reduce process time, and guarantee consistent homogeneity in every batch. Technical Specifications: - Bowl capacity: 600 L - Knife motor power: 20 kW - Power supply: 400 V – three-phase – 50 Hz - Operation: Vacuum cutter - Unloading: Tilting bowl - Construction: Food-grade stainless steel - Year of manufacture: 1994

Condition: ready for operation (used), functionality: fully functional, The Stephan UM60E cutter is designed for processing workshops seeking a reliable and precise solution for chopping and mixing food products. It allows handling of variable loads with high consistency, improving the uniformity of textures and the final quality of preparations. As a result, recipes remain repeatable and production deviations are minimized. Additionally, Stephan’s design ensures optimal process control, even for demanding applications. This cutter is easily integrated into existing production environments thanks to its compact footprint while still providing a work capacity suited for industrial needs. The stainless steel bowl and frame guarantee excellent resistance to wear and compliance with hygiene standards. Furthermore, the direct drive motor via the knife shaft increases cutting efficiency and reduces energy losses. Therefore, the user benefits from precise and stable operation throughout all cycles. The UM60E also offers great operational flexibility thanks to its different rotational speeds. Thus, the operator can easily adjust the operation depending on the type of product processed. Moreover, temperature and pressure management ensures optimal control during processing. Consequently, this cutter meets the requirements of workshops looking for performance, consistency, and operational safety. Offered used by Europ'Equipement, the Stephan UM60E cutter is inspected before being put back into operation. Thus, the user receives a machine ready for immediate use without major modifications. Additionally, purchasing used equipment helps control the investment while maintaining a high level of performance. As a result, this cutter is a relevant choice for optimizing processing operations while ensuring process reliability. Technical specifications: Bowl capacity: 60 liters Charge capacity: 8 to 40 liters Dimensions (L × W × H): 1,290 × 1,495 × 1,600 mm Weight: 250 kg Maximum working temperature: 95 °C Maximum working pressure: 0 bar Blsdpoyghy Rsfx Aafsc Product-contact parts: Stainless steel 304 L Chassis: Stainless steel 304 L Drive: Direct drive via knife shaft Rotational speeds: 1,500 / 3,000 or 750 / 1,500 / 3,000 rpm Motor power: 10 / 17 – 18.5 / 22 (reinforced) or 10 / 13 / 20 kW Supply voltage: 400 V – 50 Hz Control voltage: 24 V Connection power: 7 to 11 kW – 20 to 25 A (curve) Brake: disk type

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22/16, overall weight: 600 kg, power: 4.65 kW (6.32 HP), space requirement height: 1,950 mm, space requirement length: 3,362 mm, space requirement width: 1,774 mm, Herb Cutting Machine S 350 W This machine is designed for cutting fresh and dried herbs. It offers a wide range of applications and is ideal for processing lemongrass, mint, parsley, chamomile, St. John's wort, mountain tea, and similar herbs. Blodpfxjyghgqj Aafjc Wide range of cutting sizes: Thanks to precision blades and an efficient herb feeding system into the cutting zone, as well as flexible control of the conveyor belt speed and blade rotation speed, the desired cut size can be set from just a few millimeters up to 10 cm. The machine features two stacked conveyor belts. The upper belt is movable and inclined. It guides the herbs into the cutting zone and compresses them during the cutting process. The cutting area consists of a rotating blade (with two or three cutting arms) and two counter blades. Electronic control: Both conveyor belts are equipped with electronic speed control, allowing you to adjust the cutting size of the herbs. Speed is controlled via a frequency converter. Adjustment is made using a potentiometer, with set values displayed on a screen. Technical Data S 350 W: Dimensions (L/W/H): 3362 mm x 1774 mm x 1950 mm Approximate weight: 800 kg Blade motor: 3 kW / 380 V Blade motor – frequency controller: 3.7 kW Belt motor: 3 x 0.37 kW / 380 V Belt motor – frequency controller: 2 x 0.65 kW Speed control - blades: Electronic Speed control - belts: Electronic Belt width: 350 mm, made from food-safe materials Capacity: up to 3,000 kg/h fresh herbs, up to 600 kg/h dried herbs Material: Black steel; all parts in contact with the herbs are made of stainless steel and materials that comply with all health standards. Sound pressure level (A and C scale): At measurement points per reference standards in the workplace, the following values are measured during operation: LAeq(A) = 70.6 dB(A) LCeq(C) = 81.48 dB(C) LCpeak = 94.86 dB(A) Year of manufacture: 2016 If you have any questions or would like to arrange a viewing, please contact us at any time. Shipping by forwarding agent is possible by arrangement.

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Bedpfx Aasxllclofjlc

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder Blodjyddu Sspfx Aafsc CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h Bljdpfx Aaeb Nulhjfjc from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: used, tool clamping area 0 mm weight 0 t Bedsd Ihcajpfx Aafjlc Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!

Condition: used, Shaper cutters from Module 1 to Module 14 available: Bedpfx Aasl Idr Esfjlc - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request!

Year of construction: 2014, condition: used, functionality: fully functional, We offer this used TESEO FC4 400 TH CNC cutting machine, year of manufacture 2014. Manufacturer: TESEO Model: FC4 400 TH Year of manufacture: 2014 Blodpfx Aajygc Rwjfec Condition: used Category ID: 19 Machine type: TESEO CNC cutting machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2011, Offer consisting of: Polar 115 XT Plus from a public sector facility, maintained accordingly. The machine is in exceptional condition. Includes 2 spare knives, Includes side air tables, Bledpeyc Nnhefx Aafec Includes toolbox and further accessories. Machine available immediately, inspection possible, operational video available upon request.

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Blsdpfswu Agcox Aafsc Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Format: 0x0 Blodpfxex Rh D Ej Aafjc Equipment: Corner cutter

Condition: used, Year of construction: 1982, Format: 0x0 Bsdpfx Asx Rh Dxeafelc Equipment: Corner cutter, manual

Condition: excellent (used), Manufacturer: LVD Model: Electra FL3015 Serial Number: 36445 Country of Origin: Belgium Year of Manufacture: 2016 Blodpfx Asxvawleafoc Technical Specifications: Laser Type: Fiber Laser Laser Power: 3 kW Working Area: 3000 mm × 1500 mm Laser Source: Rofin FL030 Fiber Laser Source Laser Source Serial Number: 987 Laser Source Year of Manufacture: 2015 Additional Equipment: Thermotec Chiller Unit – chiller unit for stabilizing the temperature of the laser source Donaldson Torit DCE DFPro-4SPK – fume extraction and filtration system Infeed/Outfeed Shuttle Table – automatic loading/unloading table Light Guards – light protection system.