Used Label Printers for sale (2,269)

Condition: excellent (used), Year of construction: 2018, EFI Vutek GS2000Lx Pro Ultradrop Superwide-format hybrid printer (flatbed + roll-to-roll) Printing technology: UV LED (“cool cure”) Designed for industrial-scale production (signage, POP, display graphics) Colour configuration: 8 colours (CMYK Lc Lm LY Lk) + white RIP: Workstation + Fiery RIP included Mileage: less than 300.000m² Printhead status: very good. In production-demo possible Decommissioning, transport and installation possible upon request. Bedpfsy H I Rqex Adrjli Maximum speed (Fast-4 mode): up to 186 m²/h POP quality (600 dpi): ~70 m²/h High quality (1000 dpi): ~21 m²/h Board-to-board time: < 5 seconds For further technical details please refer to attached brochure

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Blsdpfxszh Dqye Adroi Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, SLM Solutions Type: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (excluding substrate plate height) 3D optics configuration: Quad (4 x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scanning speed: 10 m/s Average protective gas consumption during the build process: 16 l/min (argon) Average protective gas consumption during the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Bodpfozh Dqtox Adroli

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Bsdpozh Dqmsfx Adrsli Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 Layer thickness: 20-80 μm Manufacturing speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage duration: Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Inox 200 lifting device Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutting unit NA 7-11 H CL EU Zone 22 Dimensions: 800 x 480-570 x 755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Bodpfx Ajzh Dp Nodreli Water consumption: 0.26 l/h Weight: 50 kg QM powder automatic sieving station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone. Blsdpfxozh Dp Aj Adroi

Condition: excellent (used), Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded to Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer. Bljdpfx Adezh Dn Eeroi Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Decommissioning, transport and installation available upon request. For further technical details, refer to enclosed data sheet. Bjdpfxozhv T Ts Adrsli

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) Blsdpfx Aoyr Nr Sodroi - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Bodpfxezhlr Es Adrjli Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Blodpjqy E N Ssfx Adroi Intuitive Display, Dial, Assisted Leveling Condition Note: Company-used printer, always stored in optimal conditions.

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck Bodjzhaadjpfx Adrjli - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Blodjvtftqjpfx Adroi Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) Bledpfx Aezg Tzlsdroi For further questions, we are happy to assist you by phone.

Condition: used, functionality: fully functional, Roland VersaUV LEF-12 UV-LED flatbed printer including BOFA Base Unit (extraction/filtration unit). Sold on behalf of a customer, fully functional. Printer: - Roland VersaUV LEF-12, UV-LED technology - Weight: 85 kg - Connection: 1 phase, 100–240 V, 50/60 Hz, 1.8 A - Made in Japan Base Unit (extraction): Blsdpfx Adozicqzsrsi - BOFA International Ltd, model for LEF12 - Connection: 115–230 V, 50/60 Hz, 12.5 A - Date of manufacture 08/2011 Direct printing on objects, advertising technology, gadgets, packaging, and more. Location: 6112 Wattens (Tyrol). Collection only. Payment in cash upon collection or by instant bank transfer before loading/collection. Viewing by appointment. Sold on behalf of a customer.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: GW-DGL030409, number of ink cartridges: 6, color channels: CMYKWV, type of input current: AC, input voltage: 220 V, We are offering this used Gateway Flatbed Printer GJ5058L digital printing machine, manufactured in 2019, for sale. Manufacturer: Gateway Technology Industry Co., Ltd. Model: GJ5058L Date of manufacture: December 2019 Serial number: GW-DGL030409 Power supply: 220 V AC, 50 Hz Weight: 500 kg Bledey U R Stjpfx Adroi If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2002, condition: good (used), Manufacturer: HAPA Type: 421 Year: 2002 Power: max.300 vials per minute. Label size: min: 15x 28mm max: 60x 76mm Vial diameter: 8-30 mm Pharmacy Bsdecq Tm Eepfx Adrsli

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Bljdpfxjziatgo Adrji Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Condition: repair required (used), functionality: limited functionality, A complete Pago Print and apply applicator and height adjuster with lateral adjuster on floor stand with castors - unit powers up but nothing shows up on display - for parts or repair Ready to ship worldwide Bsdpjyiu A Rofx Adreli Please contact us via Whats App and we will share additional pictures and videos

Condition: used, Year of construction: 2010, Data matrix labelling and marking module (printing + distribution + control)Brand = Transvis and Avery DennisonCE Declaration of ConformityQuantity : 3Machine 1 : Avery labeller : ALX 720R (Year 10/2001) + Transvis datamatrix code reading and control unit (Year 12/2010)Machine 2: Avery labeller: ALX 720R (Year Transvis datamatrix code reading and control unit (Year 12/2010)Machine 3: Avery Labeller: ALX 710R (Year 12/1993) + Transvis datamatrix code reading and control unit (Year 12/2010)Machine 1 and 3 complete and functional. Bjdpfx Adozg I Uaoreli Machine 2: Complete and working labelling unit, control unit for spare parts.

Condition: used, Inspection machine for detecting labelling errors, under- and overfilled bottles, and faulty closures. Defective bottles are diverted. The bottles passing through are also counted. The fill level is measured using gamma absorption. Additional title: Full-bottle inspection machine; years of manufacture appr. 1997 - 2008 Bjdpszg I Ndsfx Adreli Capacity max.: 30000 bo/h Power: 300 VA Voltage: 230 V Frequency: 50 Hz

Year of construction: 1995, condition: used, Labelling machine with two gluing units for wet-glue labelling of paper neck, chest and back labels onto glass bottles. Additional title: Cold glue labeling Capacity filling line: 12000 bo/h Current: 12 A Voltage: 400 V Frequency: 50 Hz Bedpfx Aezg I Itodroli Formats: 0.5 l Euro, NRW; 0.33 l Giesinger – body, chest and back labels Running direction: links -> rechts Base construction: Carousel-type machine Features: 2 gluing units, protective housing with doors, glue pumps

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. Bedpfx Aezh Nayedreli The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request.

Condition: excellent (used), color A4 printers in very good condition Blodpfezh I Atjx Adroi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Bjdpfx Adszh I Aasreli Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.