Used L Sealer for sale (64,476)

Condition: excellent (used), A good used Saxon 2 Hot Air Heat Sealing Machine on a Stainless Steel height adjustable column with a stainless steel mobile trolley - right to left handing Cgjdpfx Aswtgt Djbbjn

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WD700/10, Technical data: 1 Vetter / Demag pillar jib crane NL 500KG with Demag chain hoist Type AS5-4.0 Cedpfx Aov Hv Edsbbsgn Payload at full reach 500 KG / 0.5 tonne payload Height: approx. 3.75m UK boom: approx. 3.42m Reach: approx. 3.5m Hook height: approx. 2.85m Total weight approx. 800Kg including dowel plate 1050mm with Demag chain hoist 500Kg (older) Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD1093/25, Technical data: 1 Vetter / Donati pillar jib crane NL 2000KG with chain hoist Type M20-4.5 Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.7m UK boom: approx. 3.28m Reach: approx. 4.5m Hook height: approx. 2.8m Cedpfovv Nr Njx Abbjgn Total weight approx. 2000Kg including dowel plate 1570mm with Donati chain hoist NL 2000Kg with trolley drive Swivel range 360°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 Cgedpfx Absufud Deben :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available Cgodpogh Hu Uofx Abbjn for further questions please contact me

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Cgedpfsydibwox Abben Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: excellent (used), Year of construction: 2004, Available: Immediately Codpfxeyhpwyj Abbjgn

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: E21PK20118050868, This is the latest generation iVario Pro L from premium manufacturer Rational, equipped with the additional pressure cooking mode. The unit has just undergone a thorough inspection in our in-house specialist workshop and is in good used condition, supplied with a 6-MONTH WARRANTY! Optional accessories for the iVario are available for purchase at an additional cost. You will receive an invoice with VAT clearly stated. The manufacturer’s recommended retail price (RRP) for the unit is €21,868 net, and €1,079 net for the basic accessories. Service: We are happy to connect you with a certified Rational customer service provider nationwide in Germany. Looking for a specific Rational model? Ask us – we have access to an extensive range of both used and new equipment. We provide expert advice on all unit types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our equipment service for you: - 6 months warranty on all electrical components - High-quality branded appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully operational – or your money back - Flexible shipping or self-collection available - Competent advice – before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - Safety testing according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 1030 x 894 x 1078 mm Electrical connection: V: 400 / kW: 27 / Hz: 50 Serial number: E21PK20118050868 Year of manufacture: 2020 Cgedowt A Evopfx Abbjn Condition: Used, tested, fully functional Features: - iCookingSuite: intelligent cooking assistant with 6 cooking modes (meat, fish, vegetables and side dishes, egg dishes, dairy and desserts, soups and sauces) or 5 cooking methods (boiling, roasting, frying, braising, and finishing) - iZoneControl: flexible division of the pan base into zones at different temperatures - Pressure cooking function - Low-temperature cooking (including overnight), confit, sous-vide cooking - Vario Cooking Control mode: select desired cooking results at the touch of a finger, e.g., from light to dark - Vario Boost: patented heating system for perfectly uniform and precise heat transfer - Programming mode: create manual programs and manage cooking processes - Integrated WiFi interface, e.g., for connection to ConnectedCooking Additional details: - Capacity: 100 liters - Integrated 230 V socket - Integrated hand shower with automatic retraction and adjustable spray - High-quality pan base - Seamless construction with rounded corners - Core temperature probe with 6 measuring points - 1,200 programmable and nameable programs, each with up to 12 steps - Integrated hose shower and water drain in the pan - Display of temperature in °C or °F - Pressure cooking function - Tiltable cooking pan - Lid with integrated water intake - Automatic display of service messages - IPX5 water jet protection - USB interface for HACCP data output and updates - Includes base frame with plastic feet Functions: - Manual mode (30°C-250°C): set liquid temperature, pan base temperature, oil temperature - Automatic, liter-precise water filling system - Delta-T cooking - Auto Lift: raising/lowering device (baskets for boiling and frying) Note: The frying function is locked but can be enabled.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 94 h, functionality: fully functional, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening, Technotrans cooling and recirculation, inking unit temperature control, Anicolor inking units, double sheet control, sidelay control, blanket wash device, roller wash device, impression cylinder wash device, Autoplate, IR dryer, extended delivery. Machine no.: GS000526, Impressions: 95 million Cjdpjyhn Tmsfx Abbegn

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Cgsdpfx Abeyhnfcsbon Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m Cjdpfsw I R Ndox Abbogn with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: used, mileage: 422,348 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, number of seats: 79, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, General Engine: MAN AdBlue Emission Standard: EURO6 Total Seats: 79 Seats: 77+1+1 sleeper seats with lap belts Cgodpex Iav Isfx Abben Transmission: Automatic Genuine mileage Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobiliser * LED lighting * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger cabin * Auxiliary heater * Wood-look flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Air nozzles * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Headrests * Tour guide microphone * Driver microphone * Pram storage space * Wheelchair ramp * Wheelchair space Audio, Communication, Electronics * Navigation system * Radio, CD * USB port at every seat * USB port at multimedia system * USB port at driver’s station * Video, DVD * Power sockets * Fire detection system * Voltage converter Exterior * Trailer coupling * Matrix/destination display Hanover * Lifting/lowering system * Power steering * Digital tachograph card * Sun visor * Sleeper cab pre-installed * Electrically adjustable exterior mirrors * Ski box lashing rings * Central locking * Roof hatches Miscellaneous * German vehicle registration certificate * Twin tyres * Vehicle length: 14.00 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Wheel covers * Front axle tyres approx. 50% * Middle axle tyres approx. 50% * Rear axle tyres approx. 50% Our internal vehicle number: 11995 Subject to errors. Images and text may differ from the actual vehicle. Constant stock of over 300 vehicles available.

Year of construction: 2015, condition: ready for operation (used), This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information. • Machine Type: Modular Gear Machining Center / Multi-Process Gear Production System • Machine Concept: Flexible modular system for dry machining of gears and transmission components. Configurable with multiple process modules according to customer requirements. • Polygon and face slot machining • Gear and spline cutting (rotative cutting, hobbing, front-face gear cutting) Codpex Imuqofx Abbjgn • SCUDDING® internal and external gear generation • Gear tooth pointing (rotative and indexing modes) • Chamfering and deburring (ZEM series) • Shifter stop machining for synchronizer sleeves • Free programmable tool/workpiece synchronization • Modular design with different machine sizes • Single or multispindle configurations • Short cycle times • Parallel processes possible • Reduced setup and operating costs • Ergonomic and maintenance-friendly access • Suitable for dry machining • Gear quality DIN 5–7 (with SCUDDING®) • Surface roughness Rz 2–3 • High cutting stability and precision • Automotive gearbox components • Synchronizer gears • Shafts and gear wheels • Internal and external splines • Belt pulley profiles • High-precision gear components

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) Codpfx Asyhfg Dobbjgn and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: good (used), Year of construction: 1987, Waste compactor with rotating compaction unit. It can be continously filled. Manufacturer: Bergmann Type: PS 8100-L Manufacturing year: 1987 Overall dimensions: 1500 x 1600 x 2200 mm Weight: 800 kg Useful size: Cjdpfx Absk E Exqsbogn -Grinding drum diameter: 1040 mm -Grinding drum height: 850 mm Grinder rev: 8/min Electrical data: Voltage: 220 / 380 V Electrical power: 1,1 kW

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: Csdoyhc T Ijpfx Abbegn - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM (14) units available.

Condition: used, Year of construction: 1998, machine/vehicle number: PST26, Alfa Laval Pasteurizer – Overview This pre-owned Alfa Laval pasteurizer is designed for continuous thermal treatment of dairy liquids, ensuring product safety and consistent quality for downstream processing and packaging. Built by Alfa Laval engineering, it offers reliable performance for beverage production and dairy operations seeking a dependable second hand unit to integrate into a used bottling line or industrial packaging environment. With a capacity range of 3,000 to 5,000 L/h, it is well suited for medium-scale production of milk destined for cheese, yogurt, sour cream, and goat’s milk applications. Recognized for robust construction and sanitary design, this pasteurizer supports efficient heat exchange and stable process control. Its throughput and versatility make it a practical choice for processors looking to optimize line efficiency without compromising hygiene or product integrity. Technical Specifications & Performance Data Cedpfjyhb Dfsx Abbogn Manufacturer: Alfa Laval Year: 1998 Capacity: 3,000–5,000 L/h (maximum 5,000 L/h) Application: Pasteurization of milk for cheese, yogurt, sour cream, and goat’s milk Configuration: Continuous pasteurization system suitable for integration in beverage production and dairy lines Advanced Automation & Control Systems The unit is engineered to support precise thermal control and holding times typical of continuous pasteurization processes. Instrumentation and safeguards are designed to help maintain consistent product temperatures across varying flow rates. Control provisions support operational adjustments, recipe setpoints, and monitoring to align with production standards in industrial packaging and processing environments. Production Line Integration Capabilities This pasteurizer can be integrated inline with upstream storage and standardization processes and downstream filling and packaging equipment within a used bottling line or dairy production setup. Its capacity range fits a wide variety of operational scenarios, providing flexibility for multi-product dairy plants handling different milk types. It is compatible with typical CIP-centric plant layouts and can function as a standalone thermal treatment node or as part of a fully automated beverage production line. Machine Condition & Maintenance History Offered as a second hand unit and available for immediate use, this machine is presented as ready for operation based on the seller’s offering context. Detailed service logs, operating hours, and refurbishment records were not provided in the available documentation. Operational Performance & Versatility Optimized for milk processing, including cow’s and goat’s milk, the system supports product preparation for diverse end uses such as cheese, yogurt, and sour cream manufacturing. Its continuous flow design is suitable for stable throughput within the 3,000–5,000 L/h range, supporting consistent quality control and dependable thermal performance. Installation Requirements & Site Preparation Typical installation involves connection to process utilities and alignment with existing production lines. Site preparation generally includes adequate floor space for the heat exchanger frame, piping access, and integration with plant uti...

Condition: used, Year of construction: 2006, machine/vehicle number: LC562, Used UHT Milk Preparation Room Tetra Pak 4000 L-h Operating Capacity and Product Versatility The Used UHT Milk Preparation Room Tetra Pak 4000 L-h delivers optimized aseptic thermal processing for dairy and beverage applications. Specifically, the unit operates at variable flow rates from 2000 to 4000 liters per hour, making it suitable for plain milk, flavored milk, drinking yoghurt, and condensed milk. Furthermore, with program adjustments, the same line also processes fruit juices, nectars, and soft drinks. As a result, this flexibility makes it ideal for multi-product operations. The plant currently remains in storage, and as such, is ready for relocation and installation in a new production facility. In-Line Aseptic Homogenization The Used UHT Milk Preparation Room Tetra Pak 4000 L-h includes an aseptic homogenizer manufactured by Tetra Pak, model Tetra Alex, year 2006. In particular, this unit, positioned downstream of preheating, operates in sterile conditions to ensure the breakdown of fat globules and uniform dispersion of solid and liquid phases. Consequently, it helps preserve the emulsion stability of flavored milk and yoghurt drinks. Moreover, the inline aseptic design reduces contamination risk after thermal processing. Therefore, it maintains the product’s physical and chemical consistency throughout downstream stages. In addition, the robust construction simplifies cleaning and routine maintenance. Clean-in-Place (CIP) System The line integrates a CIP (Clean-in-Place) system supplied by Gemak in 2009, which consists of four dedicated tanks: nitric acid, caustic soda, hot water, and rinse water. Notably, the system automatically sanitizes all product-contact surfaces under controlled parameters. In doing so, it ensures compliance with hygiene standards across multiple cleaning phases. Additionally, it manages solution recovery and water usage optimization across all cleaning circuits. As such, the CIP system in the Used UHT Milk Preparation Room Tetra Pak 4000 L-h minimizes downtime and supports continuous production. Above all, it protects product integrity between production cycles. Thermal Treatment and Holding Time Control Codpfx Abeyhbudobjgn The sterilization process relies on a holding coil supplied by Tetra Pak in 2006, designed to maintain the product at the target temperature for the required time. When paired with a tubular UHT heat exchanger, this coil enables indirect and uniform thermal processing. Thus, the system ensures accurate residence times and optimal microbial reduction. Likewise, the unit maintains organoleptic properties through consistent thermal transfer. Therefore, the Used UHT Milk Preparation Room Tetra Pak 4000 L-h delivers reliable processing for both dairy and plant-based applications. Deaeration and Sterile Storage The system includes a Tetra Pak deaerator from 2006, which removes dissolved oxygen and unwanted gases before the UHT process. Accordingly, it improves product shelf-life and minimizes oxidative degradation. Furthermore, the deaerator connects directly to a 3500-liter sterile tank, model Alsafe, also by Tetra Pak (2006). Because of this connection, the product transfers in a closed, sterile environment. In turn, this configuration preserves product sterility after treatment and maintains aseptic conditions up to the filling stage. Technical Conclusion In summary, the Used UHT Milk Preparation Roo...

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Cgjdpfsyhbt Hex Abben Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, machine/vehicle number: 006467, Max. panel width: 1200 mm Cgsdpoyhbk Esfx Abben Max. panel length: 2500 mm 90 degree transfer system: yes

Condition: used, machine/vehicle number: 005385, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Codsg Iy Duepfx Abbsgn Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Cgsdpfx Asx Idxtsbbjn Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007877, Max. panel width: 1100 mm Codpfx Aowkf Hqobbjgn Max. panel length: 2500 mm Panel return for edgebander: Left

Condition: excellent (used), Strapping machine SIVORON / GIGANT Model S 669 L integrated strap reel belt width 6/ 9/ 12/ 15.5 mm Electrical connection 230 V, 50 Hz Adjustable belt tension Temperature welding system idle rollers in the work table mobile with cord wheels Dimensions L x W x H = 1460 x 600 x 1600 Weight approx. 70 kg Cgodpfx Abjuxm Hasbon Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,489 h, load capacity: 1,400 kg, lifting height: 4,455 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,095 mm, fork length: 1,190 mm, drive type: Elektro, High lift stacker Mast type: Triplex Transmission: Automatic Condition: Refurbished with warranty Cgodpfxow I H Sns Abbsn Technical condition: Very good Front tyres type: Polyurethane Front tyres condition: New Rear tyres type: Polyurethane Rear tyres condition: New Battery voltage: 24V Battery capacity: 225Ah Battery year: 2024 Battery condition: 80 - 100% Description: Price includes new safety inspection (UVV), new paintwork. The machine is factory reconditioned with a reconditioned Q1 Toyota battery (approx. 1 year old, remaining capacity approx. 90%), suitable charger with plug included. We are happy to arrange inexpensive transport for you. Leasing purchase possible! Initial lift, full free lift, CE certificate,