Used Krones Labelling Machine for sale (138)

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats Dcodpfey Azq Njx Aiiep - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: Dcodpfx Aoy A Nd Doiisp - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm Djdpfozzz Najx Aiiocp - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h - Containers: glass bottles - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium. Dsdo Agpqwepfx Aiijcp

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Dedpoy Tn D Dsfx Aiijcp - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: ready for operation (used), Year of construction: 1995, A fully automatic Krones layer depalletizer is available. Pallet format X/Y: 1200mm/1100mm, max. pallet height: 2110mm, pallet travel: longitudinal, max. depalletizing capacity: 8000containers/h, container volume formats: 200ml/375ml/750ml/1000ml, container diameter range: 55.5mm-89.5mm, container height range: 205.5mm-310mm, container conveying height: 3290mm, pallet conveying height: 550mm. Machine dimensions X/Y/Z: approx. 6300mm/2200mm/3350mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Dcedpjzl U Nujfx Aiijp

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Dcedpfx Aoy Uduusiiop

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs Dsdpoz Sr Imofx Aiiocp - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: used, Year of construction: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data - Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. - Formats: Dcodpfezb Afqex Aiiop - 0.75l bottle - 0,5l bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Direction of operation: Left to right

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) Dsdpfxjw T Sths Aiiscp - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 Dcjdpfxozcga Uj Aiiop - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Djdpot Rbznofx Aiiecp

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Dcedpfx Asl Hxnieiisp

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Dedpfx Ajytqzwjiijcp Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures Djdpfx Asyluwtjiiecp - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2000, Empty bottle inspector Manufacturer: Krones Model: Linatronic 712-M1; Year of manufacture: 2000 Additional title: Empty bottle inspection machine Djdpew Taypofx Aiiocp Capacity: 32000 Bottles/h Length: 4200 mm Width: 1100 mm Height: 2900 mm Formats: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L Lemonade Running direction: right -> left Operation / Control: Simatic S7-300 Position: free standing Base construction: Square tube frame on dome feet Features: Basic machine, detection and inspection systems, rejection systems, supply/machine protection, drives, conveyor belt

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Dcedpfx Aioytpc Hjisp Compliance: CE conformity available Availability: On request

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data - Manufacturer: Krones AG - Machine Type: Blitzpac case packer / bottle packer Dcodpfx Aiszb Aghsisp - Machine Description: Blitzpac Einpacker 23 Year of Manufacture: 2003 - Application: Packing of PET bottles into crates - Pack Format: 12-bottle crate - Capacity: approx. 2,700 crates/hour - Control / HMI: MTS 10 operator panel - Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling - Condition: Used, observed in industrial production environment

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Dedpfx Aexc H Tgeiijcp Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts  

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Dcedpszb Ad Tsfx Aiiep - Manufacturer: Krones / Krones Zierk GmbH - Model / Type: K6W-25-S-E - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Application: Washing / cleaning of beverage crates - Construction: Stainless steel machine housing and frame - Conveyor System: Integrated slat-chain conveyor and crate transport sections - Drive System: Electric drive motor with gearbox - Inspection Access: Viewing window with safety latch hooks - Control System: Integrated electrical control cabinet - Operator Panel: Push-buttons, indicator lights and red rotary main switch - Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary... Dcsdoy Szb Topfx Aiijp

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Additional title: Monobloc arrangement Dcsdpoxb Ahwsfx Aiiep Capacity: 7000 bo/h Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Position: free standing Features: Labeller Universella Periphery: miho inspection device

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Dodsn S A R Sspfx Aiiecp

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Dcodsqqz T Hjpfx Aiijp

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Dsdjqqz Txepfx Aiiscp