Used Kolbus Perfect Binder for sale (89)

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Psdpjq Aufqofx Aalepl Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: good (used), Case maker Kolbus Model DA36 Minimum size 110 x 155 mm Maximum block size 405 x 560 mm Spine size 8 -80 mm Speed Machine can run 14-15 cases a minute in it´s current condition Formats that we do mostly on the machine are A4, A5, B5, B6 The machine can work with paper and PU leather materials. The machine is in operation and can be tested until September 2024, after that we install a new machine so the test will not be possible Location: Serbia Pjdpfx Aajuauivjlepl

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter Ppodpfx Aod R Saqealsl • delivery conveyor to the right

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: Ppedpfxega Dito Aalsl max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Year of construction: 2001, condition: good (used), Built in 2001 Podpfxsd Sp Eis Aalspl operating voltage 230/400 V; 3~ operating voltage 50 Hz

Year of construction: 2003, condition: good (used), Built in 2003 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Ppjdpfxsd Td U Do Aalel

Year of construction: 2002, condition: used, Size min 105 x 105 mm max 310 x 510 mm Pile height magazine max 250 mm Pile height transport channel max 80 mm Feeding height ca. 920 mm Mechanical speed 12.000 c/h Equipment gathering machine: Psdpfx Aaec Rtcmeljpl • 1 element with 3 stations

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks Ppjdodubvqopfx Aalsl • 2 set of knives • external knife changing device • central lubrication • belt delivery

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size max 510 x 305 mm min 250 x 100 mm Book block thickness max 5-80 mm Speed max 20.000 c/h Ppjdpfx Aajd Hp I Nolol

Year of construction: 1997, condition: used, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station Pedpfx Aob Hppfealepl • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer optionales Equipment:--not included-- • - Opticontrol signature image reader

Year of construction: 1997, condition: used, Built in 1997 Pjdenxinkopfx Aalepl Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery optionales Equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • conveyer system ca. 20 m • three knife trimmer Kolbus HD 150

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1050, IN ADDITION TO THE MACHINE, THERE ARE: KOLBUS ZU 840 SIGNATURE COLLECTOR, 4 STREAMFEEDER MOD. OMG LOADERS COMPLETE WITH CLAMPS, 1 MULLER MARTINI LOADER, BOOK BLOCK FEEDER WITH LEFT-HAND LOADING, RAISING DEVICE, AMBAFLEX TOWER MOD. SV-400-1800-HS. THE MACHINE IS WORKING AND CAN BE CHECKED AT OUR OFFICE IN MALALBERGO (BO), BY APPOINTMENT. Ppedpfxev Rp Nqj Aalol

Year of construction: 2003, condition: good (used), Built in 2003 Size: max 460 x 310 mm min 125 x 100 mm Pile height magazine: max 240 mm Speed: max 8.000 c/h Podpfx Ajfu H Suoaljpl Equipment: gathering machine: • 24 stations

Year of construction: 2002, condition: good (used), Built in: 2002 Size: min 105 x 105 mm max. 310 x 510 mm Pile height magazine: max 250 mm Pile height transport channel: max 80 mm Feeding height: ca. 920 mm Ppedpfxodyk Rfo Aalel Mechanical speed: 12.000 c/h Equipment: gathering machine: • hand feeding station • 15 stations • rejection unit AS 840

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Ppjdeh T Dhqopfx Aalsl

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Ppodex Ahl Depfx Aalel Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Podpfx Asxuad Aealopl Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Pedpev N U U Nofx Aalepl Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: excellent (used), Year of construction: 2012, Ref:11055 . 2012 Kolbus KM412.B ‘Publica’ EVA/PUR Excellent condition – only 12 million books produced & very well maintained! Comprising: Becker ‘Air Center’ vacuum unit 10 x STA stream feeders with log extensions 21 x ZU841 interchangeable top-loading feeders, standard 3 x 5mm max. thickness Mechanical & electrical de-coupling of each station possible Optoelectronic signature recognition system ‘Cascade’ control for automatic starting and finishing of a complete book ‘ATC’ Automatic thickness control for mis/double feed detection AS 841 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM412.B - 25 clamps with ‘Co-Pilot’ touch screen pre-set Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units Gluing system comprising; LH 375.C floor standing EVA hot-melt pre-melt unit Nordson PUR spine gluing system EVA hot-melt spine glue tank with cam-controlled cut-off Hot-melt spine glue application Hot-melt side glue unit I.R. heating in radius for increased glue open time SAL 412 stream cover feeder with scoring & equipment for handling pre-folded covers Cover nipping/pressing station 2nd nipping/pressing station Delivery system with lay-down device and reject station ‘AmbaFlex’ XAF 661 tower + TS.Z conveyor system (details on request) to; Kolbus HD153.P pile trimmer with ‘Co-Pilot’ pre-setting Rima/Kolbus XKL 500 compensating book stacker Including spares, manuals & Kolbus 3.60 remote internet link & back-up. N.B. Compressed air supply to binder, trimmer & stacker required (NOT included). Specification: Book size, Max: 420 x 320 x 70 mm Ppedpfx Ajx Uwq Nsalsl Min: 105 x 100 mm Book thickness : 3 -- 70 mm Open cover width, Max: 710 mm Mechanical speed, Max: 12,000 cycles/hr

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable Psdpfx Aaet Rmhaslopl - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU Ppedperf U Iiefx Aalsl • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right

Condition: ready for operation (used), Year of construction: 2006, Built in 2006 Size max 320 x 510 x 70 mm Speed max 15.000 c/h Gatherer 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station Ppodjx Np Szjpfx Aalsl - 3rd spine preparation station - Brushing station - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer Kolbus HD 152P - counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Condition: used, Year of construction: 1995, Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feederBaujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mmAussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz für Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed stationRatiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rückenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heißleim / Hotmelt side gluing unit Fälzelstation / Back Lining station Ppsdpfxon Aw Ukj Aalel Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für HardcoverproduktionKolbus FM 405 Buchblock- und Ganzpresse FM 405 für fadengeheftete Buchblocks für Hardcoverproduktion Book block and PRessing Station FM 405 for sewing book blocks and hard cover productionsDreischneider / Three knife Trimmer Kolbus HD 150 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1988, condition: good (used), Size: max 460 x 310 x 60 mm, min 125 x 100 x 3 mm Book block thickness: max 60 mm, min 3 mm Speed: max 6.000 c/h Equipment: gathering machine Pedpfx Aol Dpcwsalspl • chain tensioner with hand feeding station • 16 stations • machine number 62 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed perfect binder • serial number 58 • 20 clamps • jogging station • resting table • fold pressing station • milling and roughening station • brushing station • hotmelt spine gluing unit • cam controlled • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device standard accessories • pv pressure-vacuum pump • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools optionales Equipment:--not included-- • extending of the gathering machine • modification of the conveyor belts • three knife trimmer • compensating stacker • shrink wrapping • optional equipment • palletizer

Year of construction: 2002, condition: good (used), Built in 2002 Size: max 460 x 310 x 60 mm min 125 x 100 x 3 mm Product thickness: max 60 mm min 3 mm Speed: max 8.000 c/h Equipment gathering machine 18 stations Psdpegi Nk Ajfx Aalepl gatherer ZU 840 gathering pockets with ATC (auto section thickness control) reject unit AS 840 Machine can be extended with more gatherers controls missing and double sheet control intermediate elements jogging element Copilot 27 clamps milling and roughening station 2nd hotmelt spine gluing unit hotmelt side gluing unit 2 premelters stream cover feeder cover pressing station 2. cover pressing station lay down device