Used Kolbus Perfect Binder for sale (104)

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm Dwsdpfx Alszhwu Ejfjd - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: used, Card and Product Sample Adhesive Kolbus KI 224 ZU Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / Mech.Output 18.000 Ex/h (depending on type, size and  properties of base and product up to) Djdpfs Agpzksx Alfjwd Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, warranty duration: 3 months, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, KOLBUS AUTOBOX BX200 + TF200 Magazine Feeder | 2023 | Like New Produce custom-sized corrugated boxes in-house – from individual boxes to short production runs. For sale: a KOLBUS AUTOBOX BX200, manufactured in 2023, in like-new condition and fully operational. Equipped with a TF200 magazine feeder, including a transport trolley to support corrugated board feeding. Current counter reading: approximately 3,200. The Copilot touchscreen control system provides fully automatic, tool-free machine setup. Stored jobs can be recalled for repeat orders, while pre-installed FEFCO styles support flexible production of different box designs. FEATURES AND EQUIPMENT • Copilot control system with touchscreen • Production mode selection and job memory • Fully automatic, tool-free format setup • Automatic cross-cutting and longitudinal slitting knife adjustment • Fully automatic setting of pneumatically adjustable creasing and slotting tools • Two manually adjustable creasing wheels for additional crease lines • Fine adjustment using +/– buttons during production • Machine and material flow fault indication • Operator-guided troubleshooting • Servo-controlled drive technology • Various pre-installed FEFCO box styles • Equipped with 400 mm slotting knives • Slot width: 7 mm • Suitable for single-wall and double-wall corrugated board • TF200 magazine feeder with transport trolley • Documentation and operating manual available • Remote service possible FORMAT RANGE AND PERFORMANCE • Sheet width: 120–1,950 mm • Blank length: 500–8,000 mm • Board thickness: 1–10 mm • Minimum slot spacing: 100 mm • Mechanical speed: up to 80 m/min Actual production output depends on board quality, box dimensions, design and operating conditions. TECHNICAL DATA – BX200 BOXMAKER ONLY • Dimensions (L × W × H): 1,770 × 2,830 × 1,800 mm • Weight: approximately 2,000 kg • Electrical supply: 3-phase, 400 V / N / PE, 50 Hz • Compressed air supply: 6 bar • Compressed air consumption: 20 Nm³/h Dimensions and weight above refer to the boxmaker only, excluding the magazine feeder and ancillary equipment. CONDITION AND LOCATION • Year of manufacture: 2023 • Condition: like new, fully operational • Current counter reading: approximately 3,200 • Location: Jena, Germany INSTALLATION, TRAINING, SERVICE AND SPARE PARTS Installation, commissioning, operator training and technical service can be offered separately through former KOLBUS AUTOBOX employees with extensive machine and application experience. Spare parts support and supply are also available through us. Please contact us for an individual quotation covering the machine and your required services. Dsdoyaa Rnepfx Alfowd ALTERNATIVE MACHINE AVAILABLE A second machine, manufactured in 2019, is also available. This machine will be supplied fully refurbished and updated to the latest software version. Further information and equipment details are available on request. CONTACT Tobias Greiling CCSTG – Corrugated Converting Solutions Phone: +49 175 9733507 Subject to prior sale. Errors and changes reserved.

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Dwjdez Eaq Iopfx Alfod Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2011, Gathering element Kolbus ZU 832.A Year: 2011 Description: - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Please note: A total of 3 elements are available - if you are interested, please send us an enquiry Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Dsdpszhvinjfx Alfewd

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Machine no: 34, Books produced: 2 million Dwodjwnqtkopfx Alfod

Condition: used, Year of construction: 2010, Gathering element(s) Kolbus ZU 832.A Year: 2010 Description: - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Dsdpfozhvn Rex Alfowd Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Dwedey Tacxjpfx Alfed Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr Automatic Palletizing product infeed via accumulating conveyor Dedpfx Aljyxqvgofewd Pallet dimensions: 1360 x 1200 - 1000 x 800 travel stop for dropping of very smooth products pallet removal in moving direction Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Dwodpfeyw Tc Tex Alfod

Year of construction: 2014, condition: used, Conveyor Kolbus TS.L Year: 2014 Description: - Transport system, length (approx): 80 cm Dwjdpfx Aljyt Dzwefed - Book turning decive

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Djdszx S Riopfx Alfowd Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Eckenrundstossmaschine - Corner Rounding Machine Kolbus EH Serial-No. 294203 Rundes Messer Nr. 11 / Round Knife No. 11 Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Dwodpfo Agpz Sjx Alfsd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: Dodpevqbhlofx Alfewd - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 machine for box production easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting Dwsdpsx El N Iofx Alfed incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Condition: used, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EP Year 1972 - Serial-No. 275 Size max: 405 mm Accessories: 2-corner-pulling-heads Dwodpfx Als Agpzvjfsd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Djdpjzxdhmjfx Alfswd Optional equipment for viscosity control unit Available in stock

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Dwjdpfx Aon Nv Sdelfed

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: Dwodjzcuz Hjpfx Alfjd - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00 Dwjdpfsz A A Azex Alfod

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 Dwjdpfewdgfzjx Alfjd For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor - Feeder for cases - Case bending station: DBA - Foil transporting device Dwodpfszvd U Isx Alfsd - Case set up outside machine - Matrix plate 2 - Counter stacker

Condition: used, Year of construction: 2015, Front cutter Kolbus FA 650 Year: 2015 Description: - TFT Touch screen - Opening by suction belts - Cutting unit Dwodpfxjyzm T Te Alfed - Knife pre-setting device - Throughfeed Max. mechanical speed: 4.000 cycles/h Maximum size (uncutted): 480 x 375 x 50 mm Minimum size (uncutted): 125 x 105 x 3 mm Maximum size (cutted): 480 x 350 x 50 mm Minimum size (cutted): 125 x 100 x 3 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: KS 842, KOLBUS KS – Machine for Cutting Bookbinding Materials Manufacturer: KOLBUS (Germany) Model: KS (Cardboard and Narrow Slitting Machine) Year of manufacture: 1975 Purpose: Precision longitudinal and cross-cutting of covering materials from rolls or sheets (calico, bookbinding cloth, imitation leather, Balacron, gauze, PVC). Technical specifications: • Maximum roll width: 1,400 mm • Cutting width (longitudinal cut): minimum 50 mm to maximum 1,400 mm Dodez A A Hgepfx Alfewd • Cutting length (cross-cut): minimum 10 mm to maximum 1,050 mm • Cutting system: Shaft with circular knives for longitudinal cutting + guillotine knife for cross-cutting • Speed: 14–36 strokes (cuts) per minute The machine is well maintained, fully functional, and ready for operation. Price: €4,500.00

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for the production of corrugated cardboard boxes, capable of manufacturing a variety of box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic setup via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the capability to produce over 100 different box styles. The machine offers high flexibility, allowing for rapid changeovers between different sizes and styles. Technical Specifications - Maximum speed: up to 100 m/min - Widths: from 100 mm to 2590 mm (102 inches) - Length: Unlimited - Box types: Over 100 different styles, including 0201, wraps, pallet boxes, and partitions - Control: Fully automatic setup via touchscreen - Energy efficiency: Up to 75% energy savings compared to conventional machines Dsdpfx Alexpga Tsfjwd - Material: Suitable for all types of corrugated board