Used Koch Dryer for sale (89)

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Art.-Nr.: 2294 Hedpfx Adjxltdwsaoh year: 2004 price: 7.400.00 contact: Mr. Rainer Eckerle

Year of construction: 2003, condition: good (used), dryer dry-air KOCH CKT 300, 300 m³/h, year: 2003, price: 6.900 €, contact: Mr. Rainer Eckerle Hjdped E N Nzefx Adajh

Year of construction: 2004, condition: used, Koch dryair tanks 1x400 Liter + 3x100 L heating + controler Art.-Nr.: 2293 year: 2004 price: 7.900.00 contact: Mr. Rainer Eckerle Hjdpfjxltctex Adash

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 Hedpoity Adjfx Adajh price: 10.900 € contact: Mr. Rainer Eckerle

Year of construction: 2004, condition: used, Koch dryair tanks 2x200 L 2x100 L with auxiliary heating Regulator Art.-Nr.: 2295 year: 2004 Hjdpoxltf Usfx Adash price: 7.900.00 contact: Mr. Rainer Eckerle

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Hjdpfx Asb Hu S Tsdajh

Year of construction: 2004, condition: used, Koch dyairdryer EKO 800 800 m³/h Art.-Nr.: 2292 year: 2004 Hsdpfx Asxltb Nedash price: 9,800.00 contact: Mr. Rainer Eckerle

Year of construction: 2011, condition: good (used), Koch dryairdryer CKT 2000 2000 m³/h max. 129 KW year 2011 price: 25.500€ Contact: Mr. Rainer Eckerle Hsdpowmbluofx Adaoh

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Lateral horizontal groups: yes Hjdpfjg E Th Ssx Adaoh

Condition: good (used), Koch drying container 1500 liters with additional heating 18 KWr Hsdpfowmbncjx Adaeh year price: 7.900€ Contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2008, Koch central controler SPS 16 year 2008 price: €2,750.00 Hjdpfx Asw Hyuujdaoh contact: Mr. Rainer Eckerle

Condition: good (used), Koch material separator 24 Volt price: 790 € Hsdpfov Rcntox Adaoh contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Please note: Hodpjx U A I Hjfx Adaoh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Hedpsyatkbjfx Adaoh Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2003, Conveyor devices Cook Hjdsmxkmxspfx Adajh Type 603 Year ca,2003

Condition: new, machine/vehicle number: 22069, total height: 23,000 mm, total length: 36,600 mm, total width: 9,400 mm, working height: 420 mm, input frequency: 50 Hz, input voltage: 400 V, overall weight: 2,100 kg, The electro-mechanic case clamp VK011 allows a fast assembly of cabinets without having to make pre-adjustments on the clamp. The strong clamping plates of the VK011 enable all-over clamping of the cases to achieve the highest quality results. A clamping power of up to 2.300 kg can be generated in the press. - Vertical press plate (150 x 50 mm) - Horizontal press plate (150 x 50 mm) - Preselection of pressing time - Max. pressing pressure 1,800 kg (horizontal), 2,300 kg (vertical) - Machine operation via joystick - 2-hand operation Advantages: - High flexibility:Pressing pressure is variably adjustable. Great variety of different cabinet dimensions possible - Maximum output due to positioning speed of up to 54 mm/sec (ECO up to 29 mm/sec) - Intuitive operation via joystick - High safety standards due to CE-conformity e.g. 2-hand-operation, security fence etc. Hodpfxsgqfpfj Adaeh - Sturdy design, linear guides and ball screws lead to the highest precision - Plug & Play

Condition: new, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. Hodegqfnzopfx Adash This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch Trailer 150x250cm, 750kg, "Type U6M" Our best-selling unbraked Koch trailer Type U6M with a superstructure made entirely from anodized aluminium. Passenger car trailer Type U6M with loading dimensions of 150 x 250 x 25cm. Lightweight aluminium trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch Trailer Works has been manufacturing quality trailers "Made in Germany" for over 30 years. Features - 10-year warranty (unique) - Double-walled anodized aluminium side walls, 30mm (unique) - Side wall with load securing system in V2A stainless steel (unique) - 1 x 22/200 aluminium ramp, mounted laterally - Side wall assembly entirely with 8mm V2A stainless steel bolts (unique) - Jockey wheel included as standard Hedsi R Hxkopfx Adaoh - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional Equipment - 15mm anti-slip, water-resistant birch plywood platform (phenolic resin coated) - Axle and drawbar fully hot-dip galvanized by AL-KO - Large 185/70 R13 balanced tires, rated for up to 100 km/h - Steel mudguards bolted with 8mm stainless steel screws - 12-volt electrical system, 13-pin plug with reversing light - 2 rear supports as shown are available as an accessory for €102.00 Other Information - Registration certificate / Vehicle document Part II If you wish to purchase this trailer or have further questions regarding trailers, please use our internal enclosed trailer "Type-U6M_Offer" form.

Condition: new, functionality: fully functional, machine/vehicle number: 10200726, empty load weight: 410 kg, maximum load weight: 2,190 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2026, Koch trailer 125x250cm, 750kg, "Type U4" with high tarpaulin 150cm Type U4 car trailer with a loading dimension of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light High tarpaulin 150cm in gray Set of hooks mounted, hot-dip galvanized, also for net attachment Frame easily removable Other documents Vehicle registration certificate / registration certificate part 2 Accessories available at extra cost, see below. Hodpoi R Hw Hofx Adaoh If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No. U4-HP150 offer".

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low loader trailer 125x250cm, 750kg, "Type U4" Type U4 car trailer with a loading dimension of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Hjdpfei R Hw Ajx Adaeh Dropside bolting completely 8 mm V2A stainless steel (unique) Three-sided lashing gallery / railing (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Support wheel Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185 /70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light Other documents Vehicle registration certificate / registration certificate part 2 Various accessories available at extra cost! You would like to buy this trailer or have further trailer queries then please use our internal box trailer "Nr.10000475".

Condition: new, functionality: fully functional, machine/vehicle number: 10401475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Product information "Koch lid trailer 125x250cm height:65cm 750kg|Type U4" Lid trailer 125x250cm, 750kg, "Type U4" Car trailer with lid type U4 with a loading dimension of 125 x 250 x 65cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light All-aluminum cover with 8 mm V2a screw connection Hsdpfxji R Hwxe Adash Sturdy V2a lid lock at the rear with discus lock 2 sturdy V2a stainless steel hinges at the front 2 gas springs for easy opening Cover easily removable Other documents Vehicle registration certificate / registration certificate part 2 If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No.10401475".

Condition: new, machine/vehicle number: 10000275, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 440 mm, Year of construction: 2026, Passenger Car Trailer Type U2 with loading dimensions of 105 x 205 x 45 cm. Lightweight aluminum trailer with a permissible total weight of 750 kg and a payload of 620 kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Features: - 10-year warranty (unique) - Double-walled anodized aluminum side panel, 30 mm thick (unique) - Side panel with cargo securing system in V2A stainless steel (unique) - Highly robust rear gate latches in V2A stainless steel (unique) - Complete sidewall fastening using 8 mm V2A stainless steel screws (unique) - Three-sided lashing rail / railing (unique) - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: - Support wheel - Easily removable tailgate - 12 mm anti-slip phenolic plywood base, waterproof bonded birch wood, highly durable Hsdoi R Hwfopfx Adajh - Axle and drawbar fully hot-dip galvanized, manufacturer ALKO - Large 185/70 R13 tires, balanced and rated for up to 100 km/h - Steel mudguards bolted with 8 mm stainless steel screws - 12-volt electrics, 13-pin plug with reversing light Miscellaneous: - Vehicle registration certificate (part II) - Various accessories available for an additional charge! If you would like to purchase this trailer or have further inquiries about trailers, please use our internal box trailer "No. 10000275".

Condition: used, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Hedpjx S Scbefx Adaoh Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Condition: used, Year of construction: 2000, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system Hodpfx Asx S Sb Dsdaoh - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Condition: used, Year of construction: 1995, machine/vehicle number: 9511/5376, workpiece height (max.): 40 mm, working width: 1,200 mm, number of spindles: 1, table width: 1,300 mm, table height: 900 mm, working height: 900 mm, pressure: 6 bar, workpiece width (max.): 1,200 mm, KOCH drilling and dowel insertion machine Type SPRINT PTP Workpiece dimensions Workpiece length (Y) 100 - 800 mm Workpiece width (X) 20 - 1200 mm Workpiece thickness (Z) 10 - 40 mm Machine equipment - Horizontal drilling station with one drilling spindle Hjdpfxorc A Nwe Adash -Drill holder Ø 10 mm - Dowel hole blow-out and extraction system - Glue application and dowel insertion station with a DW34 dowel tool for dowels Ø 8 mm - ELC electronic glue monitoring system - Vibratory conveyor - Glue pump 1:1 - Workpiece support table 1300 mm wide - 1 stop each left and right - Mechanical digital displays for height adjustment (workpiece thickness) -PC positioning control