Used Kaltenbach Kks 400 Na for sale (117)

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm Lrodpeby Hikofx Aftsp cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Ledpfx Aohzbipsftjrp - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Lodpfx Ajyak Anefterp Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Lrodpfougtiuox Aftjp Hydr. rotary and tilting welding table - Four-axis welding manipulator Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation - E. foot switch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Condition: excellent (used), Condition: very good, item appears almost unused Lredoyuudljpfx Aftsp Roller width: 350 mm Height adjustable from 650 mm to 950 mm Price for 3 pieces: 375.-- net

Condition: used, Year of construction: 2005, functionality: unexamined, Kaltenbach KBS 620 DG — Horizontal Double-Mitre Band Saw, Year 2005 Specifications Cutting capacity 90°: 620 x 350 mm Cutting capacity 70°: 610 x 350 mm Cutting capacity 60°: 570 x 350 mm Cutting capacity 45°: 470 x 350 mm Lrsdpjyrgrpefx Aftsp Cutting capacity -45°: 430 x 350 mm Mitre range: +60° / -45° (double mitre) Blade dimensions: 6175 x 41 x 1.3 mm Blade types: Bi-metal M2, M42, M51 Cutting speed: 15–90 m/min (steplessly adjustable) Feed rate: max. 400 mm/min Construction: Double-column, heavy-duty steel frame Control: NC-controlled mitre angle setting Software: Kaltenbach PROFICUT Cooling: Air cooling + micro oil lubrication Weight: approx. 2,600 kg Features: Suitable for cutting steel profiles, tubes, and flat bars. Hydraulic clamping after angle adjustment, steplessly adjustable blade feed, NC-controlled length measurement.

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Lredpfjv Ncpbsx Aftep Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Year of construction: 1998, condition: used, Max. saw blade diameter: 350 mm Manual material tensioner Lrjdpfx Afjxvzdtjtsp

Condition: used, Year of construction: 1999, cutting width 150 mm Lsdjva Nqgjpfx Aftsrp machine weight ab. 300 kg 27468

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t Lsdpfx Afod N Sm Dstsrp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand Lodpfx Ajhkhumoftorp The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw Ledpouiy Rqsfx Aftorp - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min Lsdpfxsh Uqpvo Aftjrp incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Lrjdjv Hgkqjpfx Aftop

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Ljdpfx Ajwt Tkvsftsrp

Condition: used, Cold circular saw for light metal Saw blade 350 mm ø Cold circular saw for steel, Spontan Ljdpfx Afeyl Nt Nstjrp Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Saw blade 225 mm ø, hydraulic feed 300 mm Control unit defective

Year of construction: 1996, condition: ready for operation (used), A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible. Lodpfxjx Dcaxo Aftorp