Used Jig for sale (189)

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse Gjdoxyadtjpfx Ahvstw corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: new, Year of construction: 2024, functionality: fully functional, RÖDER Profile Drilling Machine PBA 3000 NC with 2-axis positioning control Heidenhain Positip 8016 active for x- and y-axis and drilling unit Optimum MH35V Year of manufacture: 2024 For rational and efficient drilling of beams, profiles, tubes, and other long workpieces Technical Data: Max. travel distance x-axis: 3000 mm Max. travel distance y-axis: 250 mm Max. travel distance z-axis: 350 mm Max. support length: 5700 mm (by means of extendable support rollers) Max. support weight: 500 kg Standard Equipment: 3 pcs. mechanical vices Röhm BOF 4 Max. clamping width: 220 mm Clamping width: 160 mm Jaw height: 50 mm Drilling unit Optimum MH35V Technical Data: Motor: 1.5 kW, 400 V Drilling capacity in S235JR: ø 32 mm Continuous drilling capacity in S235JR: ø 28 mm Tapping mode: Yes Spindle taper: BT 30 Spindle stroke: 90 mm Gearbox: Two-stage industrial motor and additionally 6 gearbox speeds Speed range: 220 – 3100 rpm Gear head: swivels +/- 30° Minimum quantity lubrication equipped with micro-dosing pump, pneumatic frequency generator, 6 mm push-in fitting for pressure supply/device control; 75-litre PE fluid tank, nozzle feed line D8 mm, length 2000 mm, plastic link nozzle G1/8" with holder D12 x 30 mm, nozzle tip made from aluminium Optional, available at extra cost: Pneumatic tapping unit M3 – M12; integrated on PBA 3000/6000, pneumatic, with flexible arm, Speed 400 rpm Working area: Radius 100–950 mm, 6 pcs. quick-change inserts M4, 5, 6, 8, 10, 12; including linear guide, adapter, pneumatic connection and maintenance unit Gtsdpfx Ajx E Sytjhvow Subject to prior sale. No liability for typographical errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 150 mm, The KT1200 coordinate table with TSB 35 (drilling machine by Knuth) allows for high efficiency – maximum time savings, as the time-consuming measuring, marking with high tolerances, center punching, and manual positioning are no longer necessary. Gtodex E Sl Nepfx Ahvow Functionality – precise positioning capability and absolute repeat accuracy thanks to adjustable stops. Coordinate Table Technical Data: - Max. travel distance x-axis: 1,200 mm - Max. travel distance y-axis: 150 mm - Max. workpiece weight: 60 kg - Vices: 2 pcs. - Max. clamping width of vice: 158 mm - Max. clamp opening of vice: 140 mm - Required space (L x W x H): 1850 x 560 x 2000 mm - Repeatability: +/- 0.2 mm - Electronic position indicators - Position stops: 8x (x-axis) - Travel movements x and y: 2x handwheel with clamping Knuth TSB 35 Drilling Machine Technical Data: - Drilling capacity in S235JR: Ø 35 mm - Continuous drilling capacity in S235JR: Ø 25 mm - Thread cutting in S235JR: M22 - Spindle taper: MK 4 - Speed range: 125 – 3030 rpm Subject to prior sale. No warranty for typographical errors or mistakes.

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Gjdpfx Ahewphgdjvotw Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. Gedpsw D Uqfsfx Ahvstw 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Gtsdpfx Ahex Dkymjvjw Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 160 mm, table width: 1,850 mm, table load: 75 kg, 2-axis coordinate table KT1200 for professional use with pillar drilling machines - can be used with all common makes of pillar drilling machines using the adapter plates included in the scope of delivery. Travels: x-axis 1200 mm y-axis 160 mm With the KT1200, you achieve maximum time savings because the time-consuming measuring, scribing, center punching and manual positioning with high tolerances is no longer necessary. Precise positioning and repeat accuracy is made possible. including 2 vices can be freely positioned over the entire travel range, the coordinate table can be moved in x and y directions using the handwheels; a clamp guarantees that the coordinates approached are fixed, 8 pcs. Position stops for the x-axis, one position indicator each for x- and y-axis Clamping width max. 158 mm, Clamping width 140 mm Space requirement LxWxH 1850 x 560 x 285 mm; Gjdpfx Ajuzkdnjhvjtw Electronic position indicators for x- and y-axis; Repeat accuracy +/- 0.2 mm Weight: 75 kg Max. Workpiece dimensions 120 x 120 x 1200 mm Max. Workpiece weight: 60 kg Mounting support for drilling machine at least 520 x 225 mm Drilling unit optionally available. Now at a special price for stock clearance!

Condition: good (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 120 mm, table length: 600 mm, table height: 380 mm, type of input current: AC, We are selling our Hauser S3 coordinate grinding machine The machine is in good condition and still in operation. Year of manufacture: 1991 Travel: 400x250x120 mm Table: 600x380 mm Notes: - The price does NOT include any accessories! - Collection by the buyer, ex works. - Collection date to be agreed with the seller. Gsdpexzqbxofx Ahvetw - No warranty - Advance payment (invoice) or cash payment upon collection

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges timely collection between 26/01/2026 and 29/01/2026! Gtodpfexqqmaex Ahvow Contents include: 2 ALUP compressors RENNER refrigerated dryer another compressor FRIEDRICH DECKEL jig grinding machine

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Gjdpfxeid Iymo Ahvstw Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Year of construction: 2018, condition: excellent (used), Drilling machine with coordinate deduction system, little use, fully programmable. Specification: Model: APOLLO TRAP + SPEEDY Serial no: T6104130618 Year: 2018 Force: 3.4 KN Weight: 620 kg Godpfxjpcgybo Ahvotw Made in: Italy If you have more questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1987, We offer you: Jig Grinding Machine Manufacturer: HAUSER Model: S3-DR Year of manufacture: 1987 Technical specifications: Travel: - X-axis: 400 mm - Y-axis: 250 mm - Z-axis: 300 mm Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Subject to changes and errors in technical data and information, as well as prior sale! Gtedpfx Ajxw Sx Rohvjw

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 30547, spindle speed (max.): 160,000 rpm, table width: 350 mm, table length: 700 mm, overall weight: 3,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By placing a bid, you commit to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Spindle speed Turbine T10: 75 / 100,000 rpm Spindle speed Turbine T16: 120,000 – 160,000 rpm Table dimensions: approx. 700 x 350 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,900 mm Weight: 3,000 kg Gsdsxnl Imjpfx Ahvotw EQUIPMENT 3 different high-frequency grinding heads (various speeds) Two-axis digital display by VISULESTA With 4 T-slots

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Gtjdpfsxwp A Hsx Ahvew Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: ready for operation (used), Year of construction: 1988, operating hours: 20,231 h, functionality: fully functional, machine/vehicle number: 2080, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 80,000 rpm, workpiece weight (max.): 300 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid commits the buyer to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 200 mm Travel Z-axis: 250 mm Maximum spindle speed: 80,000 rpm Distance between column and spindle: 340 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Adjustment range X: 400 mm Adjustment range Y: 250 mm Adjustment range W: 450 mm Adjustment range Z: 120 mm Adjustment range U: 6/20 mm Gedsxm Rq Depfx Ahvetw Table dimensions: 600 x 380 mm T-slots included: 6 Width of T-slots: 10 mm Distance between T-slots: 50 mm Maximum table load: 300 kg Max. taper grinding: 16 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,500 x 3,000 mm Total weight: 7,000 kg Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Connected load: 7.5 kW Operating Hours Grinding hours: 20,231 h Power-on hours: 49,158 h EQUIPMENT SAV magnetic chuck (300 x 150 mm) Lista double workshop drawer cabinet Abrasives High-frequency grinding heads up to approx. 80,000 rpm

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 30091329802, Year of construction: 2016, operating hours: 1,209 h, total length: 1,120 mm, total height: 1,070 mm, total width: 740 mm, overall weight: 211 kg, input voltage: 220 V, input current: 10 A, working width: 295 mm, working height: 142 mm, working length: 211 mm, This machine has been lightly used in our showroom and for creating customer samples. The ProJet MJP 2500 Plus produces precision rigid and elastomeric parts with true-to-CAD accuracy, a superior surface finish, and high-quality edge fidelity, making it ideal for true functional testing. Key Capabilities * High-Resolution Printing: Capable of printing in Ultra High Definition (UHD) mode, allowing for features as fine as 300 microns. * Precision and Quality: Delivers true-to-CAD accuracy with a superior surface finish and high-quality edge fidelity. Material Compatibility This printer is compatible with a wide and versatile selection of VisiJet materials, including: * Engineering and rigid plastics. * A broad range of rigid materials in clear and opaque colors. * Materials with properties that mimic engineering plastics. * Elastomers and high-temperature resistant materials. Gtsdjxg Rhcepfx Ahvow Common Applications * Concept modeling, form and fit testing. * Functional prototyping and fluid flow analysis. * Rapid tooling, jigs, and fixtures. * Medical applications requiring USP Class VI and/or ISO 10993 certification for biocompatibility.

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Gtjdpfxoxqqibo Ahvow Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: used, Year of construction: 1996, Surface Grinding Machine JONES & SHIPMAN 540 P Travel X: 483 mm Travel Y: 168 mm Maxi grinding height: Wheel chuck 190 mm / without chuck 240 mm Spindle rotation: 3200 RPM Year of construction: 1996 Magnetic chuck dimensions: 450 x 150 mm Grinding wheel: Ø 200 mm x thickness 25 mm Auto stepover X - Y Manual Z-axis rise Voltage: 380 V Gtodpoxqqgtsfx Ahvsw Equipped with: 1 Manual Magnetic Chuck BRAILLON PFF Equipped with: 1 Lubricant tank DARENTH type 1004/01 Tank dimensions: L 650 mm x Depth 700 mm x H 900 mm Dimensions (L x W x H): 1500 x 1100 x 1800 mm Weight: approx 1 T

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T Gjdpfxoxqqdxo Ahvstw

Condition: used, Year of construction: 1983, Surface Grinding Machine MONOPRECIS 1DR Gtedpfjxqqc Isx Ahvow Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Condition: used, Surface Grinding Machine HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Gtodpfoxp Nz Hsx Ahvew Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. Gjdpfexp Hq Eox Ahvetw C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, The machine was recently partially overhauled at a cost of €15,000! The machine features six high-quality grinding motors, a spur motor, and turbines. TECHNICAL DETAILS Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Taper grinding: max. 16° Table Table size: 600 x 380 mm T-slots: 6, 10 mm wide, 50 mm spacing Table load: 300 kg Tool holder and speeds 22S: E23 Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 80S speed: 40,000 - 80,000 rpm T10/T16: Ø 3 mm T10/T16 speed: 100,000 / 160,000 rpm Groove grinder: 2,900 - 34,500 rpm Gtsdov Rck Uepfx Ahvow Planetary motion: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rates X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Mains pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Power consumption: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinder - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction system - High-quality accessories included

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Gsdpfx Aec U U Udshvjtw Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: excellent (used), Year of construction: 1988, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, AVAILABLE SOON! VERY WELL-PRESERVED COORDINATE GRINDING MACHINE Gtjdpfxsv Amy Do Ahvew HAUSER S 3 - YOM 1988 Table travel 400 x 200 mm Machine in excellent condition with an unusually extensive range of accessories. Rotary table can be rotated via handwheel or freely. High-precision universal table - rotatable, swiveling, and tilting Swivel range 90° - Angle of rotation readout in 5 seconds - Several grinding motors and various turbines up to 200,000 rpm with corresponding collets. Automatic feed along the U-axis with separate MY digital display Machine wiring (heating) for constant machine temperature Coolant system with splash guard Acoustic & optical proximity monitoring with headphones Centering microscope Halogen lamp Centering devices with MY clocks Hydraulic clamping of the X and Y axes Automatic central lubrication Complete documentation with circuit diagrams, etc. Machine costs less than the accessories new! Technical data is non-binding - errors excepted. Pricing: ex stock, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Payment: as usual - before removal - immediately upon receipt of invoice.