Used Jet 16 32 for sale (56)

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically operated high pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame is made of hot-dip galvanised and powder-coated sheet metal mouldings with stainless steel side frames all round. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and the slim version are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 Dcsdpfx Abshf Nbdo Tjr CE20-500-16 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of petrol-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tires with a parking brake on the rear axle and castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with all-round side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General specifications: ----- Drive motor: 2 cylinder 4-stroke petrol engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with hand throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Dcsdpshga U Aefx Ab Tsr Includes standard accessories.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included. Dcedpfxexufbto Ab Tsr

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Dcsdpfshgbgqox Ab Tsr Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Dcsdpfshga Irox Ab Tjr Weight: 650 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE08 series is an electrically powered high pressure cleaner. Dcedehf Nakspfx Ab Tsr This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Dcodsx A Sfhspfx Ab Tjr Price is for the entire unit.

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 Dcodpfjqwgzqex Ab Tjr with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SANDERS (€2000) With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty. Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning tasks, ranging from small to very large projects. The advantage of this machine is its absence of new-generation electronics. It is one of the most aggressive machines on the market. This unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting setup with the following equipment: COLD JET i3 Microclean (12 HOURS OF OPERATION) 1 x 20' blasting hose 1 x Cold Jet applicator 1 x nozzle Dedpfxoxga Tzs Ab Tjcr Price: €24,500 One of the best machines in the world. No electronic systems; therefore, highly reliable and inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repair and maintenance services available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Droogijsstraalmachine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines i3 Microclean Dry ice press

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 940 mm, grinding height: 150 mm, – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: – Grinding width: 940 mm – Grinding height: 150 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Feed motor power: 0.25 HP – Main motor: 5.55 kW – Grinding rollers: 2 x ø 152 x 940 mm – Speed: 1400 rpm – Feed speed: 2 or 3 m/min – Extraction port diameter: 2 x ø 100 mm – Motor power: (400 V) 5600 W / S1 100% – Dimensions (L/W/H): 1090 / 1420 / 1090 mm – Weight: 440 kg Dodpfxsw Ip Rts Ab Tjcr

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Specifications: Grinding Air Pressure: 174 PSI Dodpfxoxw Tcqo Ab Tjcr

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, input voltage: 230 V, overall weight: 135 kg, input frequency: 5 Hz, Further technical data: Dcodpfx Abju E Tb Ro Ter Sanding height: 160 mm Suction connection: 100 mm Speed: 1400 rpm (spindle) oscillating including sanding spindles

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for maximum smoothness and stability when working with unbalanced workpieces Headstock movable along the entire length of the machine bed, 360° rotatable with locking positions at 0, 30, 60, 90, 135, 180, 270 degrees Variomatic speed control, continuously adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle dividing device 36 x10° Spindle locking on the front of the headstock for easy change of workholding devices Dodpfx Abow A Rqfj Tjcr Double wedge clamping for tool rest and extension arm, offering extra slip resistance and efficiency Tailstock with robust trapezoidal thread, 108mm quill stroke with scale, 9 mm through-hole

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and operational after retrofit in 11/2025, Maximator JET certificate Dcsdpfxjxvqvfe Ab Tor Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clear height: 200 mm with Quick UP • TAC12 cutting head, A/B +/- 12° • Automatic height sensing and collision protection • NUM CNC control system • Rittal control cabinet on wheels • Operating PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld control device • Laser positioning system • MJ 100 cutting valve • aJET 3D abrasive head • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container, 1,200 kg, with automatic pressure feed system • High-pressure piping on axes, up to the cutting head • Safety system with light barriers • Water tray with heavy-duty slat support • Edge stops in X and Y • Machine feet: precision wedge mounts • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 h, retrofit in 10/2025 with warranty, new pulsation damper with TÜV approval Technical data and prices subject to change and error. Prior sale reserved.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Dcodow Ttxfspfx Ab Ter Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Dodpfx Aboi Hckro Tecr ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. Dsdpfx Aexr Ddueb Tocr This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Dcsdpfjxp Rcfsx Ab Ter

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: Dsdpfsxgumcox Ab Tecr 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2012, Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Djdpfxewx Rm Es Ab Tjcr Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine is as new This machine is suitable for industrial cleaning, both for everyday tasks and for very large projects. A key advantage of this machine is the lack of complex new-generation electronics, making it one of the most robust and aggressive machines on the market. The machine is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €14,900 NO VAT NO TAX This is one of the best machines in the world. It is entirely free from unnecessary electronics, ensuring reliability and keeping maintenance costs low. For inquiries or to arrange a viewing, please contact us – Dr.Dryice. All machines sold come with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. New Cold Jet machines available on request – please contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine dry ice blasting unit – dry ice blasting | dry ice machine | dry ice blaster Dcjdswg R Rmjpfx Ab Ter Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Dry ice blasting machines, various Cold Jet models Cold Jet dry ice machine maintenance and repair

Condition: good (used), BACCI DOUBLE JET Dcsdpfx Aoxr Dcwjb Tjr The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA Dsdpfjxgua Aex Ab Tscr 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Dcjdpowyk Uxsfx Ab Tjr Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Year of construction: 2008, operating hours: 256 h, functionality: fully functional, compressed air connection: 9.6 bar, operating pressure: 10 bar, Cold Jet Aero 75 This machine is ideal for industrial cleaning, heavy-duty, and large-scale projects. Its key advantage is the absence of complex modern electronics, making it highly reliable and straightforward to maintain. Recognized as one of the most aggressive and efficient machines available on the market, this particular unit is in excellent condition. Cold Jet Aero 75 Dry Ice Blasting Machine Complete with the Following Equipment: - COLD JET AERO 75 DRY ICE (256 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Coldjet Applicator - 2 x Nozzles (NEW) Price: €16,500 Dcsdpfewynncjx Ab Ter Considered one of the best machines worldwide—no onboard electronics, ensuring reliability and low maintenance costs. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines are sold with a 1-year warranty. We also perform repairs and maintenance on Cold Jet machines, and supply new Cold Jet units. Get in touch for more information. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines – various Cold Jet models Service and repairs for Cold Jet dry ice machines