Used Jaeckle Mig 550 for sale (8)

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Iiedpjxdda Hefx Afijh

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Iiedet A A Aqjpfx Afieh

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Technical data: Ijdov Hzq Sspfx Afisih - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Iiodpexdda Tjfx Afijh

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Iiodjqwprnjpfx Afish -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. Iijdpeu R A Dljfx Afijh - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, No. 10015 Plasma cutter Jäckle CUTTER 150 Used Air-cooled, step-switched CUTTER-series for “hard work” According to our customer, the machine is fully functional and can be tested during an on-site viewing 2 cutting steps Plasma gas: compressed air HF-ignition Connection for plasma torch: central Thermal overload protection Very robust and reliable design Clear and service-friendly design Suitable for gouging Supply voltage 400 V, 50 Hz Fuse (slow) 62 A Power draw 43 kVA Setting range 75 / 150 A Open circuit voltage 350 V Duty cycle 40°C / 70% 150 A - 140 V / 100% 75 A - 110 V Quality cut 35 mm Severance cut 45 mm System of protection IP 22 Insulation class H (180°C) System of cooling F Compressed-air supply 5.5 bar / 230 l/min Transport dimensions approx. 1200 x 800 x 1000 mm LWH Weight approx. 165 kg Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Isdpfewbkcfex Afisih Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA Iisdpfsw En E Eox Afieh connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles