Used Italy for sale (1,422)

Condition: used, Year of construction: 2025, Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  - Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) - Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) - Machine diameter: 1,320 mm - Pitch: 125.60 mm - Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Rodpjxgik Aefx Aahsw - Platform rotation: Motorized belt (R version) - Main motor: Servomotor - Electrical connection: 400 V (+/-10%), 50 Hz, 3PH + N + PE - Conveyor height: 1,100 mm - Conveyor chain: Plastic flat-top 82.5 mm, thickness 4 mm - Low voltage controls: 24 V DC - Environmental conditions: 5–45 °C; altitude up to 1,000 m - Control cabinet: Stainless steel with integrated air conditioner - Standard lubrication: Centralized, manual - Additional features: Automatic label splicing, double reel support, quick-release platforms, detection device for fallen bottles, remote assistance

Condition: used, Year of construction: 2013, Overview  Rjdpfxsxfcc Ae Aahew This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data - Capacity: Approx. 80 hL/h - Filtration system: Diatomaceous earth - Tank: Pressurized stainless steel - Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure - Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump - Valve system: Stainless steel, precise flow control - Design: Mobile filtration unit with integrated control system

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Rodezh Nnwspfx Aahjw Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - Max width of the workpiece: 230mm - Max height of the workpiece: 130mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 130mm, 5.5kW Redpfx Aaozh Iptehew 3) Vertical, left: 130mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 11kW 6) Horizontal, lower: 230mm, 18.5kW 7) Universal: 230mm, adjustable at 360 degrees, 5.5kW - All spindles adjustable up/down, left/right - All spindles equipped with an electric brake - Spindle diameter: 40mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 metal, torsion-type, infeed rollers, including 2 double rollers - Top: 4 rubber, outfeed rollers - Top: 2 pressure rollers - Bottom: Latches - Bottom, side: 3 pressure rollers - Bottom: 2 metal, smooth, infeed rollers - Bottom: 2 double, rubber, infeed rollers - Rollers pneumatically pressed - Feed via Cardan shafts - Stepless feed speed adjustment: 5-36m/min - Feed motor: 4kW - Electric adjustment of planing thickness: 0.75kW - Length of infeed table: 1980mm - Enclosed in a cabinet - Central lubrication of the table - Dust extraction nozzle diameters: 5x120mm, 2x150mm - Dimensions (L/W/H): 5500x1840x1900mm - Weight: approx. 5000kg ADVANTAGES – Made in Italy – With 7 heads – For wet and dry wood – Last spindle is universal – Unpainted – Used planer, very good condition Net price: 136900 PLN Net price: 32600 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on higher fluctuations)

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Redpfszh Ikkjx Aahjw Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: excellent (used), CATALOG NUMBER 7181 TECHNICAL DATA - max disc diameter: 300mm - disc bore diameter: 30mm - disc guard - max cutting height: 100mm - max cutting width: 700mm - possibility of angle cutting in the vertical plane +90°/-90° (arm travel or disc travel) - possibility to rotate arm right/left - motor: 2.2kW - table size: 950x700mm - extraction port diameter: 60mm - dimensions (LxWxH): 1200x950x1400mm - weight: 155kg Rodpfxozh Ifbs Aahow ADVANTAGES – manufactured in Italy – not repainted – very good condition – used saw Net price: 6500 PLN Net price: 1550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (with larger exchange rate fluctuations the price may change)

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Rjdpfx Aaszh H Ubehow Manufacturer CORAL S.p.A. (Italy) Model POLIVAL 2 ADPE Technical Specifications Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Condition: used, machine/vehicle number: 007809, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Max feed speed: 40 m/min Redpfx Aasyhbn Dohow Operating Units Right Side: 8 nr Operating Units Left Side: 8 nr

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9 Redpfx Aasx A Tizjhsw

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Redpfx Aajyng Agjhow Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Rodpfxjyhbhwj Aahjw Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Rodpfx Aaeywadwshsw Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Max. panel length: 2500 mm Length of conveyor: 13800 mm Rsdpfxsy Nkrpe Aahew

Condition: good (used), Code: 0429 Brand: AGLA Model: 1200 Automatic 1-roll polishing machine for polishing polyester and polyurethane paints, wood, metals, marble and similar materials Technical specifications: Sturdy construction Work surface dimensions: 3600 x 1260 mm Working width 1200 mm Working height 300 mm Brush diameter 350 mm Motor 15 Hp Automatic work surface lifting 2 workpiece clamps Overall dimensions mm 3600 x 2180 x 1650 h Weight kg 1700 Rsdpfjzh Eacex Aahjw

Condition: used, Code: 0354 Brand: JET/USA Model: DDS 225 - CE Standard Automatic 2-roller calibrating sanding machine for wood, furniture, joinery, custom made furniture, panels, wooden joinery, plastics and various materials – CE Standard Features: Sturdy construction Outfeed roller adjustment independent of the infeed roller Hard rubber coating on the rollers 2-speed conveyor belt Working width 635 mm Min workpiece length 230 mm Min workpiece height 0,8 mm Max workpiece height 133 mm Roller dimensions 152 x 635 mm Roller rotation speed 1400 rpm Conveyor belt speed 2–3 mt/min 2 suction inlets diameter 100 mm each Power output 5 Hp Enclosed base with door Abrasive belt 80 gr Abrasive belt 100 gr Overall dimensions mm 1150 x 1150 x 1050 h Rodey A Synepfx Aahsw Weight kg 330

Condition: good (used), Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 250 mm Rodpfx Aajyi Aaqohew Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers Redpfx Aaszab Eyehew - 3 side pressure rollers - stepless feed speed adjustment via inverter - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: Rjdpfju T Hrcox Aahjw - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Rsdpfxou T Hq So Aahow Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Installation information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Motorised thickness table adjustment with two speeds - Digital display for working height - Thickness table made of grey cast iron - Thickness table mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional with two rollers in the thickness table - Standard with noise protection and chip guard curtain at infeed and outfeed - Adjustable roller pressure - Front feed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor This item comes with a 3-year Stürmer warranty upon online registration. Warranty only applicable for end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter (thickness): 150 mm Installation information: - Required space length: 1305 mm - Required space width/depth: 1080 mm - Required space height: 1197 mm - Note on required space: The dimensions take into account maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Note on working area: Please add the given dimensions to the required space to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Max. stock removal thickness: 8 mm Electrical data: - Main motor power: 9 kW - Supply voltage: 400 V - Network frequency: 50 Hz Planer cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 4500 rpm - Planing width max.: 630 mm Feed: Redsu T Hq Eopfx Aahjw - Feed speed: 5/8/12/18 m/min

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction Rsdpfx Aju T Hhksahow - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler Manufacturer: Schilpp (Germany) Model: Contibloc 20/5 Year of Manufacture: 1974 Year of Complete Overhaul: 2019 (by Petr Markl) Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) Number of Capping Heads: 5 (Crown cork) Cap Size: 26 mm crown cap Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) Operating Pressure: 8 bar Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine Manufacturer: Enos Euro (Italy) Model: C5000 Year of Manufacture: 2019 Capacity: Up to 5,000 containers/hour (depending on label dimensions) Application: Self-adhesive labels (Body / Back) Processed Formats: Bottles, cans, and cylindrical containers Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). Labelling Machine: Enos Euro | C5000 | 2019. Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table. Redpfeyr Nr Sex Aahsw

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Rsdpfxozhkics Aahjw Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: good (used), Eurotecnica 384 Perfect Binder 100% functional, ready to use. Manufactured by Eurotecnica, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Technical specifications: Maximum format: 325 x 380 mm Spine thickness: 40 mm Cover weight: 300 gsm Production rate: approx. 200 books/h Weight: 150 kg 230V power supply Material detection sensors, adjustable gluer temperature, automatic cover clamp. Spine milling Easy to use Rsdpfx Aszhkhreahjw Smooth adjustment of glue thickness

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____ Rjdpew Iflmjfx Aahjw