Used Interplater 66 for sale (2,308)

Condition: used, functionality: fully functional, machine/vehicle number: 8712, Year of construction: 2015, operating hours: 1,950 h, load capacity: 5,000 kg, lifting height: 6,600 mm, free lift: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,050 mm, fork length: 1,200 mm, empty load weight: 8,260 kg, total length: 4,400 mm, drive type: Diesel, construction width: 1,950 mm, Sideload forklift Chassis number: 8712 Hsdpfxsx Ek Aye Ahget Load centre: 600 Fork width: 200 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 – 10,000 kg Mast type: Triplex Speed class: 20 Condition: Refurbished with warranty Technical condition: good Front tyres type: Pneumatic Front tyres size: 250-15 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 250-15 Rear tyres condition: 40 - 60% Description: 4x load posts 1,800 mm, rotating beacon and reverse signal Heater, full cabin,

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Hsdjxyhnyspfx Ahgjt Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Supports – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: Like new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 liters Total volume: 33,213 liters Product contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT carried out including: • Dimensional, visual, and identification inspection • Weld seam testing and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality inspection FAT successfully completed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Interior surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety, and process connections Mechanical configuration: • Original BRINOX stainless steel saddle supports included • Heavy-duty design • Lifting points for crane handling present CONDITION • Absolutely as new • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also as new and included in delivery. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED certificates • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Part drawings and parts lists • Operation and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR Hedjykngfjpfx Ahgjt • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new-build project with complete FAT, PED compliance, and GMP documentation. Large-capacity BRINOX 30,000 L pharma process vessel in as-new installation quality, incl. saddle supports – immediately available.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 2476208, power: 55.2 kW (75.05 HP), load capacity: 227 kg, lifting height: 20,120 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 12,800 kg, transport length: 10,340 mm, transport width: 2,440 mm, transport height: 2,570 mm, fuel type: diesel, tire size: 15 x 19,5, color: red, Technical specifications Year of manufacture: 2008 Engine: Diesel, 55.2 kW (74 hp) Working height: 22.12 m Platform height: 20.12 m Lateral reach: 17.37 m Platform size (L x W): 0.91 m x 1.83 m Overall dimensions (L x W x H): 10.34 m x 2.44 m x 2.57 m Slew range: 360° Platform rotation: 170° Load capacity: 272 kg Basket length: 1.52 m Weight: 12,800 kg Hjdpfxjyqz H Ss Ahget Climbing ability: 50% Travel speed: 7.2 km/h General signs of use, fully functional

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spindle bore: 90 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 2,000 mm, turning length: 3,500 mm, rotational speed (max.): 250 rpm, TECHNICAL DETAILS Swing diameter: 2,000 mm Turning length: 3,500 mm Swing diameter over cross slide: 1,500 mm Faceplate diameter: 1,500 mm Working area Center height: 1,050 mm Working area Distance between centers: 3,500 mm (4,350 mm with extension) Spindle bore: 90 mm Hjdoyrdqpepfx Ahgjt Speed range: 0.6 – 250 rpm Bed extension: 700 mm Roller steady rest: 150 – 1,400 mm MACHINE DETAILS Total power requirement: 28 kW Dimensions & Weight Space requirement: approx. 10 x 3 x 3 m Machine weight: approx. 22 t EQUIPMENT Tailstock Steady rest

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 68H1124, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 31/12/2025! Hsdjxyfhwopfx Ahgst

Year of construction: 2019, condition: excellent (used), We are offering this very well-maintained HEIN LR1-66-H ECOSTONE, year of manufacture 2019. Hodpfox Nppyex Ahgst If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 12,000 kg, fork length: 1,800 mm, Forks Load center: 600 Fork width: 250 mm Fork thickness: 65 mm Hsdpfjzdlrwjx Ahget Condition: Ready for use and fully functional Technical condition: very good Description: LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B

Condition: used, Year of construction: 1990, table diameter 360-800 mm automatic feeds ja weight of the machine ca. 5,7 t Hjdpfx Ahjzxianogjt

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,222 h, machine/vehicle number: 6596, load capacity: 230 kg, lifting height: 22,000 mm, platform length: 2,600 mm, platform width: 760 mm, overall weight: 12,492 kg, transport length: 10,300 mm, transport width: 2,480 mm, construction height: 2,600 mm, fuel type: diesel, tire size: 39x15-22.5, tire condition: 70 %, drive condition: 60 %, wheelbase: 2,450 mm, color: yellow, Equipment: all wheel drive, JLG 660 SJ telescopic boom lift, all-wheel drive, 22 m Working height: 22 m Platform height: 20 m Lateral reach: 17.4 m Telescopic steel construction Drive: 4-cylinder Deutz diesel engine 2 driving speeds Tire size: 39x15-22.5 Tread depth: 20-22 mm Wheelbase: 2450 mm Wheel arrangement: 4x4 Oscillating axle Overall dimensions: 10300 x 2480 x 2600 mm Weight: 12492 kg Load capacity: 230 kg Rotating platform Hydraulic platform arm: 1830 mm Platform: steel construction Platform dimensions (L x W x H): 2400 x 760 x 1100 mm Hedpezxh D Eefx Ahgjt Platform and ground controls We will gladly send you more detailed information and additional images upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Max. thickness Aluminium 8 mm Hjdpozxf Eyefx Ahgjt Motorised ram adjustment 0 - 80 Power 4.5 kW Dimensions (Estimate) Length 2000 mm Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00678, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-130/3.2 manufactured in 2010.03. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-130/3.2 Model Number: IRB-6640 Year of Manufacture Robot: 2010.03 Warranty term (months): 12   Payload (kg): 130 Reach (mm): 3200 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Hjdezxdq Ispfx Ahgjt Installation Type: Floor Mount Weight (kg): 1340   Controller: IRC5 Year of Manufacture Cabinet: 2010.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hsdpfxsvvkfdj Ahget

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00670, load capacity: 150 kg, arm reach: 2,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6620-150/2.2 manufactured in 2014.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6620-150/2.2 Model Number: IRB Year of Manufacture Robot: 2014.02 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 2200 Repeatability (mm): ± 0.03 Hjdpjzxb Rxsfx Ahgjt Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 880   Controller: IRC5 Year of Manufacture Cabinet: 2014.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), ABB 3HAC058664-001 DSQC1031 digital add-on GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers extensive service coverage for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc. Hsdpfxezxbi Uj Ahgst

Condition: excellent (used), ABB IRB6640-130/3.20 and IRC 5 controller, as well as cables. Hodozxbkljpfx Ahgjt DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers extensive service coverage for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), ABB 3HAC029818-001 DSQC 663 Drive Unit DEVELOPMENT OF GSG ROBOTICS Hsdszxbmmspfx Ahgot GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service coverage for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), ABB IRB6640-205/2.75 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Hodpezxbmyjfx Ahget

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,700 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm Hjdpfx Ahoztpmwegst 5 Stroke 250 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 6+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50665852022, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hodpfszw Sv Nex Ahgst

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50667471018, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hedpfozw Swmex Ahgst

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50667152024, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpjzw Swgefx Ahgst

Condition: ready for operation (used), Kuka rotor for 1FK7101-5AZ91 motor with Binder 86 61111H40 brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfxjzw Sybj Ahgst

Condition: ready for operation (used), Kuka rotor for 1FK7105-54Y81 motor with Binder 86 6111HH12 brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdpfjzw Syhox Ahgot

Condition: ready for operation (used), KUKA 1FK7081-5AZ91-1ZZ9-Z S04 servo motor, serial number: YFVN50666135025, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfxozw Suro Ahget