Used International 733 for sale (9,516)

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Lsdpfx Adjyck Dds Nohb Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Heating/Cooling: available Lhjdpfsycku Nox Ad Njb Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel Lsdpfx Adjycku Ao Njhb

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Lsdpfxoyckuvo Ad Nohb Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Lhodpfx Adsyckuie Neb Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Lhjdpfx Adsyckuco Njb Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Lodeyckt Sspfx Ad Njhb Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 Lsdpjyckt Esfx Ad Nshb HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Lsdpfxeycktre Ad Nshb Foot material: stainless steel

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Ljdpfxeycimkj Ad Njhb

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm Ledeyb S Rvepfx Ad Njhb swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 Ledpfx Adjyapqwe Nshb FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 2,500 kg load capacity Design and technology The forklift’s construction is made of high-strength materials, resistant to intensive use and outdoor conditions. The reinforced frame and high-rigidity mast ensure stability during lifting and transport operations. The Nissan K25 engine with an output of 50 HP is a well-established unit in the forklift industry, offering strong tractive force, durability, and excellent availability of spare parts. The Power Shift automatic transmission allows dynamic acceleration and smooth direction changes without loss of torque. In addition, the use of hydraulic brakes and support systems enhances operational safety and user comfort. Precision and operational efficiency The mast is equipped with a forward/backward tilt function (angle 6° / 12°), enabling safe and precise handling of loads in various working conditions. The side-shift function significantly reduces operating time by allowing fork position adjustments without repositioning the entire truck. Thanks to pneumatic tires with deep tread and high ground clearance, the forklift performs exceptionally well on uneven terrain, ramps, and loading yards. A travel speed of up to 19 km/h unloaded enables fast execution of handling and transport tasks over large areas. Standard equipment Nissan K25 internal combustion engine Power Shift automatic transmission Tilting mast Side-shift forks Complete work and warning lighting Reverse alarm, strobe light, turn signals 1,220 mm forks with manual spacing adjustment Choose a proven solution for internal logistics. Select the CORMak 2,500 kg forklift with the Nissan K25 engine and Power Shift transmission—contact our technical advisor or order directly online. Technical specifications Load capacity: 2,500 kg Maximum lift height: 3,000 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic (Power Shift) Travel speed (loaded / unloaded): 17 / 19 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,600 mm (L1) Distance from front axle to fork face: 469 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,160 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,024 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,000 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,070 mm (H4) Mast ground clearance: 110 mm (H5) Ground clearance: 110 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Lsdpfjycv A Ejx Ad Njhb Weight: 3,680 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Electric forklift truck with a 2,500 kg load capacity and 4,500 mm lifting height Design and technology The forklift is equipped with a modern electric drive that ensures quiet and emission-free operation. The power system is based on a high-performance 48V 490Ah battery, providing up to 10 hours of continuous operation. Compared to lithium-ion batteries, this battery offers up to 40% greater safety—it is resistant to mechanical damage, overheating, and does not emit harmful gases. A stable structure, precise hydraulic system, and a mast made of high-grade steel allow safe handling of loads at full capacity and maximum lift height. The forklift features a soft start system, power steering, and automatic speed reduction while turning, improving machine control and enhancing operator safety. Precision and operational efficiency The side-shift function allows fork position correction without the need to reposition the entire truck. Forward and backward mast tilt enables precise load placement and stable transport. A travel speed of up to 14 km/h and an optimized turning radius of 2172 mm make the forklift highly effective in narrow warehouse aisles. Applications This model is ideal for use in: high-bay warehouses and distribution centers, production plants with high material throughput, industries requiring clean, emission-free operation (food, pharmaceutical, chemical), outdoor loading areas – thanks to pneumatic tires and high ground clearance. Standard equipment Integrated 48V 490Ah battery 70A battery charger Side shift system (lateral fork movement) Tilting mast Full LED work and warning lighting Pneumatic tires with deep tread Audible warning system, turn signals, warning beacon, reverse alarm Technical specifications Load capacity: 2,500 kg Maximum lift height: 4,500 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Battery voltage / rated capacity: 48V / 490Ah Continuous operating time on full charge: up to 10 h Lhjdpfx Adsycvxys Nob Charging time: 10 h Travel speed (loaded / unloaded): 12 / 14 km/h Tire type: Pneumatic Overall length: 3,573 mm (L) Overall length without forks: 2,353 mm (L’) Wheelbase: 1,480 mm (L1) Distance from front axle to fork face: 468 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,170 mm (W1) Rear width: 950 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,038 mm (W5) Maximum lifting height: 4,500 mm (H) Overall mast height (lowered): 1,995 mm (H1) Overall mast height (raised): 5,750 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,098 mm (H4) Mast ground clearance: 110 mm (H5) Minimum ground clearance: 105 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Turning radius: 2,172 mm (r) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,015 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Lhodpfxoycvv Ss Ad Njb Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231086, Int. No. 231086 1449 Oil/Emulsion Mist Extraction System AR FILTRATIONI S.R.L. Extraction Series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate: 2600 m³/h (1.5 kW) Voltage/frequency: 230/400 V, 50 Hz Noise level: approx. 70 dBA Stage 1 – Centrifugal condenser, self-cleaning Stage 2 – Metal mesh filter, washable Stage 3 – Pocket filter Stage 4 – Fine filter mat, washable Stage 5 – HEPA ultra-fine filter Overall unit filtration efficiency: up to 99.97% - Quick and easy maintenance, once per year, high operational reliability - Sturdy construction, minimal space required - Recovery of up to 80% of condensed coolant lubricant - Design and performance in compliance with current standards - Approx. €415.00 in energy savings per air purifier - Reduction of emissions by 9,000 kg CO2/year/unit - Protects sensitive machine tool components - Protects both the environment and personnel Dimensions: approx. 990 x 570 x 1400 mm Weight: approx. 120 kg Short delivery times available by arrangement. The machine can be inspected under power by appointment. Subject to technical modifications, errors, and interim sale! Lhjdpfx Ajx U Dhued Neb

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Lhodex Ux T Espfx Ad Neb Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Ledpfstqlq Ejx Ad Njhb Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Year of construction: 2000, operating hours: 34,364 h, functionality: limited functionality, machine/vehicle number: 960-08, total width: 2,550 mm, total length: 3,600 mm, total height: 2,300 mm, type of input current: three-phase, outer diameter of label roll: 400 mm, inside diameter of label roll: 80 mm, overall weight: 4,000 kg, input voltage: 400 V, year of last overhaul: 2025, operating temperature: 25 °C, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, Krones Variomatic Machine for Sale A Krones AG Variomatic machine is offered for sale, designed for industrial use in bottling and winery environments. Manufacturer: Krones AG Year of manufacture: 2000 Serial number: 733-048 Quality management / origin: ISO 9001 Technical specifications: Supply voltage: 400 V Power type: 3-phase (3~) Frequency: 50 Hz Rated current: 20 A Capacity: approx. 6,000 bottles/hour Features: Krones Variomatic control / drive system Robust industrial design Reliable operation and long service life Can be integrated into bottling lines Applications: Wineries Beverage bottling plants Small to medium-capacity filling and bottling lines Lsdeyb Db Hopfx Ad Njhb The machine comes from an industrial operating environment. Viewing is possible by prior arrangement. 📍 For further information, please feel free to contact us.

Condition: used, Year of construction: 1989, centre height 250 mm Lhedpfxsxzuzcj Ad Njb centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Capacity: 241 gal Type of stainless: 316L Internal Pressure: 6 PSI Internal Temperature: 180°F Lhodox Ticnepfx Ad Nob Jacket Pressure: 87 PSI Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: Side Supports

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) Lhedpsx Tg Sgsfx Ad Nsb - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS - Machine weight: approx. 8,000 kg The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231441, CNC lathe – DN Solutions (Doosan) LEO 1600 Year of manufacture: 2023 Condition: As new / very good, ready for operation Availability: Short notice / by arrangement Brief Description Lhsdpfx Adox Tg R Nj Nsb For sale is a CNC lathe DN Solutions (Doosan) LEO 1600, manufactured in 2023. The machine stands out for its high stability, user-friendly operation, and reliable machining performance. It is ideally suited for cost-effective single-part and series production in conventional turning applications. Features / Highlights - Horizontal CNC lathe - Powerful main spindle - Robust machine construction for high dimensional accuracy - Tool turret with fast indexing - Compact design, minimal space requirement - User-friendly CNC control - High reliability and low maintenance Technical Data - Max. turning diameter: approx. 300 mm - Max. turning length: approx. 300 mm - Spindle bore: approx. Ø 65 mm - Main spindle speed: up to approx. 4,500 rpm - Tool turret: 12 stations - Control: FANUC CNC - Machine weight: approx. 3,500 kg The machine is fully functional both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231463, Machine Designation: CNC Short-Turning Lathe Manufacturer: Index Model: ABC Year of Manufacture: 2017 Control System: Fanuc 32i-B Operational Status: Fully operational Operating Hours: approx. ___ hours Technical Data Spindle Bore: Ø 42 mm Travel and Feed Data: X-Axis Travel: approx. 90 mm Z-Axis Travel: approx. 280 mm Rapid Traverse X: approx. 27 m/min Rapid Traverse Z: approx. 36 m/min Upper Turret (Main Tool Carrier): Number of Stations: 8 (1 synchronizable) Tool Mount: VDI 25 Capable of powered tooling Lower Turret: Number of Stations: 6 Non-driven Rear Side: 5 stations for back-working operations Simultaneous Machining: Up to 3 tools at the same time Coolant System & Chip Conveyor Bar Feeder: IRCO ILS MUK 7012-II, Year 2015 Accessories / Tooling / Manuals Machine Dimensions & Weight Machine: approx. 2830 × 1500 × 2200 mm, Weight: approx. 3,500 kg Coolant System & Chip Conveyor: approx. 1600 × 1250 × 1780 mm, Weight: approx. 680 kg Bar Feeder IRCO ILS MUK: approx. 1800 × 1000 × 1280 mm, Weight: approx. 650 kg The machine is fully operational and in good used condition. Lsdox Tftvepfx Ad Njhb For further information or to arrange a live demonstration under power, please do not hesitate to contact us. All technical specifications and details are subject to change and error. Subject to prior sale.

Condition: excellent (used), I am selling in very good condition, Kroeplin D450. Lsdpfx Aeuhh Ubjd Nshb