Used International 434 for sale (9,152)

Condition: ready for operation (used), Year of construction: 2008, A complete Maja derinding line for chops with defatting machine, derinding machine and photo detection is available. 1) Derinding machine Maja BXA 434, year of manufacture: 2008, cutting width: 434mm, infeed depth: 385mm, clearance and belt width: 443mm, machine dimensions X/Y/Z: approx. 1950mm/1000mm/1250mm, weight: approx. 350kg. 2) Defatting machine Maja BXM 434 Loin, year of manufacture: 2010, max. feed speed: 25m/min, machine dimensions X/Y/Z: approx. 1000mm/900mm/1250mm, weight: approx. 375kg. 3) Fat-lean analysis system Maja BFE 1-K, year of manufacture: 2010. Documentation available. An on-site inspection is possible. Podpfx Aeykbfzjhvsgi

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Pedpfourw Uysx Ahvogi Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW Pgsdeydlq Iepfx Ahvji - Machine weight: 5,500 kg

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Pedpfxsydlqzj Ahvogi - Machine weight: 12,410 kg

Condition: used, Year of construction: 1997, Carrying capacity: 25.460 kg GVW: 8.540 kg Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Goodyear Front tyre size: - Rear tyre size: - Please contact PFEIFER GROUP for more information Pgjdpfx Aeydhp Tehvei

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Pgodpfxsqzkdmj Ahvei

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Pgodpfx Aexyk S Ujhvoi

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Pjdpfsyg Nvtox Ahvegi

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Pgsdpfx Ahsxf Ikfevsi

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Pedpex Uq T Dofx Ahvegi

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Pgjdeyh Hhgjpfx Ahvji Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW Pgedsycxlcepfx Ahvoi weight of the machine ca. 4,2 t

Condition: used, Year of construction: 2022, operating hours: 2,700 h, Equipment: all wheel drive, Caterpillar 434 Backhoe Loader * Model number: 434 * Year of manufacture: 2022 Podpfx Ahsxpqgqjvsgi * Operating weight: 9,520 kg * Excellent condition

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Pgodpfx Ahsyck Ddjvei Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Pedpfx Ahjycku Njvogi Heating/Cooling: available Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Pgsdpfx Aoycku Aehvoi Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Pgsdpfx Aeyckuvjhvji Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Pgodpfx Ahsyckuijvei Previous application: wine storage TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Pgsdsyckucjpfx Ahvoi Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 Psdpfxoyckt Ej Ahvegi MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Pgsdoycktropfx Ahvji Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head . with - or - without ROMAI multi-spindle Podpfxeyhq Tio Ahvogi .

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. Pjdpjgigv Dofx Ahvjgi The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 200 kg, grinding length: 1,540 mm, grinding wheel diameter: 500 mm, total width: 2,400 mm, total length: 5,445 mm, total height: 1,580 mm, grinding diameter: 300 mm, workpiece length between centers: 1,623 mm, grinding wheel width: 63 mm, grinding spindle motor power: 5,500 W, overall weight: 4,900 kg, pivoting range: 90 °, rotational speed (min.): 32 rpm, rotational speed (max.): 500 rpm, workpiece spindle speed (max.): 500 rpm, Universal Cylindrical and Internal Grinding Machine E450NP x 1500. Manufacturer: JOTES Łódź – 1995. Nominal grinding length: 1500 mm. Max. workpiece length between centers: 1623 mm. Max. grinding length: 1540 mm. Center height: 150 mm. Center height above floor: 1012 mm. Headstock and tailstock taper: Morse 4. Max. workpiece weight between centers: 200 kg. Max. workpiece weight in chuck: 50 kg. Grinding wheel dimensions: external diameter 500 mm, width 63 mm, bore diameter 203 mm. Manual table traverse: 10 mm/rev. Smallest table increment: 2 mm. Grinding wheelhead swivel: +/- 90°. Spindle speed range: 32–500 rpm. Grinding wheel drive motor power: 5.5 kW. Total power requirement: 12.5 kW. Machine weight: 4900 kg. Dimensions (L x W x H): 5445 x 2400 x 1580 mm. Equipment (last photo): Pgodpfxjyhcpve Ahvsi - 3-jaw self-centering chuck 200 mm, - steady rest 160 mm, - half steady rest, - diamond wheel dresser.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Psdpfswffmmox Ahvjgi Power: 76 kW