Used International 1480 for sale (9,642)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Dodotx Ux Rspfx Albewb Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! Dwedpfx Aljzwgxrjbsb For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool Dwjdpofnlkwefx Albeb • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Dwodpezzqbljfx Albjb

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Dwodpfxjzx Rrfo Albeb Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Dsdpfx Alezycrajbewb

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Dwedpozxfbnjfx Albjb Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: used, Year of construction: 2021, machine/vehicle number: IntNr231612, An IRCO BREUNING MUK 10012-III short-bar loader, manufactured in 07/2021, is for sale. The MUK 10012-III is designed for the automatic feeding of short bars to CNC lathes. Technical specifications Bar diameter: approx. 5–100 mm Max. bar length: approx. 1,200 mm Machine weight: approx. 950 kg Equipment / Features Automatic material feeding for CNC lathes Designed for short bars up to approx. 1,200 mm Large working range up to approx. Ø 100 mm Interface for INDEX Robust industrial design Compact construction Suitable for automated series production Quality product from the German manufacturer IRCO BREUNING The machine can be viewed in operation by appointment. Subject to changes and errors in technical data and specifications, as well as prior sale! Dwedszxc E Dopfx Albsb

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation. Dwjdjzzdh Eepfx Albsb

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel Dsdszu Nzwspfx Albswb -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none Dsdpfx Aezx Rvkelbswb - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Dwjdpfx Aezx Rugolbeb Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), parts conveyor belt Chip conveyor Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 200,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Djdpfxozcfnqj Albowb Tailstock retrofitted with automatic cylinder error compensation Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.

Year of construction: 1972, condition: ready for operation (used), A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible. Dsdpfsy E S Hmsx Albewb

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231647, CNC Bar Loader LNS Express 220 Year of manufacture: 2007 Type: Bar Loading Magazine Quick guide channel changeover in less than approx. 2 minutes. Complete exchange of guide elements possible in under approx. 8 minutes. Technical data: Bar diameter range: 2 mm to 20 mm Channel diameter: 22 mm Max. bar length: 3,000 mm Installation dimensions (L x W x H): 3,970 x 480 x 1,250 mm Weight: approx. 850 kg Dodpszx Rwhsfx Albjwb Condition: fully operational The machine can be inspected under power by prior appointment. Technical data and details are subject to change and error. Subject to prior sale!

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Dwedoyg Nvtspfx Albsb

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Table size: 1400 x 600 mm Maximum table load: 1000 kg Controller: Fanuc 18i-M ATC: 30 X-axis: 1070 mm Y-axis: 610 mm Z-axis: 610 mm Cutting feed rate: 10-10000 mm/min Rapid traverse rate: 20/20/15 m/min Spindle taper: BT 40 Spindle speed: RPM 50-12000 Transport dimensions: L=3200mm, W=3000mm, H=2700mm Dwsdpfjztbuyjx Albob Machine weight: 8200 kg Chip conveyor: L=5000mm, H=1400mm Internal cooling Water tank: L=2400mm, H=1200mm

Condition: good (used), Pallet collars for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1200 mm (W x D) · For optimal use of the pallet surface · Quick assembly · Foldable for space-saving storage · Surface: green · Stackable: 4 high · Load capacity: 300 kg Find more items – new and used – in our shop! Dedjx Ih I Eepfx Albjwb International shipping costs on request!

Condition: good (used), Year of construction: 2004, machine/vehicle number: 3234, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Dsdpfszluyaox Albowb Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Dsdpfx Alexyk S Uobewb

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231636, used CNC sliding head lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Djdpjzx Rumefx Albowb Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 7428, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Dwjdpfxezfwgve Albeb Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Djdpfx Alozx Ru Hsbewb Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Dwodpfxjzww Sij Albsb Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! Dwsdoygx Hnopfx Albjb All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!