Used Internal Cylindrical Grinding Machine for sale (89,355)

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Isdpfx Aow T Sc Nsdnja Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,500 kg, The machine can be tested under power. Iodpfsw Idwzex Adnja

Condition: good (used), Year of construction: 1988, Ref. -No.: 10396 Manufacturer: KELLENBERGER Type: 600 U - Nr. 40 Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Iedpjxvw E Tjfx Adnea Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding length: 900 mm

Condition: ready for operation (used), An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible. Iodoxxzi Ijpfx Adnja

Condition: used, Distance between centres: 1000 mm Iedoxmg Ekepfx Adnsa Centre height: 250 mm B-axis: Accuracy 0.1" CNC brand: Kelco CNC model: 90 Left grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 63 mm Right grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 50 mm Workhead swivel: -30º to +120º Workhead taper: MK 5 Max. workpiece weight between centres: 150 kg Tailstock taper: MK 4 Tailstock quill travel: 50 mm Maximum peripheral speed: 32 m/s High-frequency internal grinding spindle: Ø120 mm High-frequency internal grinding spindle brand: WARNER model K 3.000 Main motor power: 7.5 kW Total power: 26.5 kW Max. Z-axis travel: 1,150 mm Max. Z-axis feed speed: 15 m/min Worktable rotation: 0º to 9º Max. X-axis travel: 320 mm Max. X-axis feed speed: 7.5 m/min Length: 3,600 mm Width: 2,000 mm Approx. weight: 5,000 kg

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Centre distance: 650 mm Ijdoxxy A Tjpfx Adnoa Technical data and accessories as per photos and PDF.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 63 CNC 3000 Centre height: 630 mm Centre distance: 3000 mm Iodpfx Aev N D Hbodnsa 1 grinding wheel: 500/380 x 100 x 203 mm

Condition: defective spare-parts repository (used), We offer you: Cylindrical grinding machine Iedpfjxxxrtox Adnoa Manufacturer: Karstens For spare parts The main spindle grinding head is missing Accessories, illustrated tools, and clamping devices are only included if stated in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 12000 kg Movement X-Axis Movement 450 mm Z-Axis Movement 850 mm Ijdpfx Adsxvt Ansnja This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. Application Types Grinding

Condition: like new (used), Year of construction: 2009, functionality: fully functional, We are selling this grinding machine, which is connected and available for testing. Machine parameters: - Grinding of rotational parts clamped between centers with an accuracy of 0.001 mm - Max. swing diameter: 0–1,450 mm - Max. turning length: 6,000 mm - Max. workpiece weight: 20,000 kg (25,000 kg with steady rests) - Grinding wheel diameter: 915 mm - Wheel width: 100 mm - Non-contact measurement of dimensions, tolerances, and workpiece geometry, including printout of measurement protocol - 100% ultrasonic measurement possible Iodpoxxrzzofx Adnsa - CNC control with capability for profile grinding (taper, concave and convex, CVC) - Grinding of ceramic and metallic coatings using diamond and ceramic grinding wheels The machine is currently completing an order.

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC CNC model: 16GC Isdjxxmcgspfx Adnea Maximum grinding length: 1000 mm Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Weight: 5,200 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, workpiece weight (max.): 130 kg, center width: 600 mm, grinding wheel diameter: 450 mm, total width: 2,110 mm, total length: 3,120 mm, total height: 1,435 mm, grinding diameter: 350 mm, quill stroke: 30 mm, grinding wheel width: 50 mm, grinding spindle speed: 2,000 rpm, overall weight: 3,100 kg, Max. Sanding diameter: Ø350mm Max. Workpiece weight: 130 kg Sanding length between centers: 600 mm Sanding spindle speed: 1500 or 2000 rpm (manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Ijdec Tnq Ispfx Adnsa Including the following standard accessories: - 120 liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange Dresser - Dressing holder with dressing diamond on tailstock - 2 centering centers - Dial gauge for table adjustment to 0 - Machine light - 3 unscrewable hooks for transportation by crane - Leveling screws with mounting plates - Machine documentation Including the following special accessories: - Internal grinding device - Inverter (Mitsubishi) for speed control on the work spindle - Inverter for speed control on the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital display Heidenhain ND 780

Year of construction: 2016, condition: ready for operation (used), A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible. Ijdpfevzbg Asx Adnoa

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,073 h, functionality: fully functional, machine/vehicle number: 80171, grinding diameter: 500 mm, overall weight: 10,000 kg, controller model: FANUC SERIES OI-TF, Equipment: bar feeder, No reserve price – guaranteed sale to the highest bidder! Payment for the machine is due by 04/12/2025! Placing a bid obligates you to collect the item within the specified period between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Grinding diameter: 500 mm Lining width: max. 32 mm Cut-off wheel permitted diameter: max. 520 mm Cut-off wheel lining width: max. 3 mm Cut-off wheel lining height: max. 5 mm Iedpexvbufjfx Adnsa MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,500 x 3,500 x 2,900 mm Total weight: 10,000 kg Control model: FANUC SERIES OI-TF Operating hours Machining hours: 5,073 h Run time: 12,219 h Control power-on hours: 32,335 h EQUIPMENT FMB Minimag 20 bar feeder Extraction system Various documentation

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm Iedpfx Aot N Ivcednja • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Tip height 150 mm External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW Iodpsxw Etnsfx Adnea

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 1560 mm Iodpfxsxuw E Dj Adnea Measurements depth 2000 mm Measurements height 2100 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-Model A Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 300 mm Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Workpiece spindle motor: 2 kW This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm supply voltage 3 x 400 V control voltage 24 V Overhauled in 2025 Delivered in april 2025 Equipment at delivery in 2004: Sanding disc equipment: left: 400x63x127mm (standard) right: 300x40x127mm B-AXIS: ‘CNC-controlled B-axis’ (standard with UR) Drive power of grinding head motor: 7.5 kW CNC control KELCO 115; : v constant 35m/s or 45m/s_adjustment n Grinding spindle by control_(standard) CNC control KELCO 115 upgraded to C-axis operation. (No polygon grinding) Pneumatic quill retraction for the tailstock Tailstock with micro-adjustment Maintenance unit for pneumatic relief Fine adjustment of the top table Standard workpiece headstock MK 5 DIN 55026 size 5’ GROSS ADJUSTMENT: ‘Swivelling lower part for the standard workhead’ KELPOS: Active longitudinal positioning MOVOMATIC, mounted on the grinding head GAP : Gating sensor MOVOMATIC Combined MOVOMATIC measuring controller, CR 100 measuring head and TMP 91, ES 124 Additional housing for control panel Isdsxwzawopfx Adnsa KELSET : Tool measuring system KELSET, MARPOSS Preparation for connection to a central coolant system incl. solenoid valve solenoid valve Half panelling (standard) B-AXIS: ‘CNC-controlled B-axis’ (standard for UR) Data of the delivery condition. No guarantee of completeness

Condition: used, Year of construction: 2006, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm Ijdpfx Adew Rf Tvonsa External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: ready for operation (used), Year of construction: 2016, operating hours: 8,834 h, functionality: fully functional, machine/vehicle number: 80042, grinding wheel diameter: 500 mm, overall weight: 10,000 kg, controller model: FANUC SERIES OI-TD, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025! Placing a bid obligates timely collection between 10/12/2025 and 12/12/2025! Iedpfoxvbn Esx Adnoa The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Grinding Wheel Grinding wheel diameter: 500 mm Grinding wheel width: max. 32 mm Cut-off Wheel Permitted diameter: max. 520 mm Wheel width: max. 3 mm Wheel height: max. 5 mm Workpiece Mounting Left workpiece spindle head Chuck type: Hydraulic clamping Right workpiece spindle head Chuck type: Hydraulic clamping MACHINE DETAILS Control model: FANUC SERIES OI-TD Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 3 x 125 A Dimensions & Weight Dimensions (L x W x H): 8,500 x 3,500 x 2,900 mm Total weight: 10,000 kg Operating Hours Machining hours: 8,834 h Runtime: 20,892 h Control on-hours: 43,292 h EQUIPMENT Bar feeder FMB

Condition: like new (used), functionality: fully functional, I am selling this grinder, as new, for internal grinding, including accessories. A video of the machine can be sent via WhatsApp. 4. Specifications 4-1 Machine Specifications Item Unit OGM-250UDX Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (centered workpiece) Grinding wheel External diameter x width x bore mm ⌀305 x 25 x ⌀127 Rotational speed (via belt change) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding spindle X-axis travel mm 203 Swivel angle degree +30° Minimum travel increment mm ⌀0.001 Handwheel feed value mm/rev ⌀2 per revolution Isdexwm Uaepfx Adnoa Table Z-axis travel mm 640 Swivel angle degree 4 to 9 Handwheel feed value mm/rev 7.5 per revolution Automatic feed rate mm/min 50 to 4000 Workhead Spindle type Spindle for combination — fixed/rotary Spindle taper Morse No. 3 Spindle through hole diameter mm ⌀17.5 Spindle speed min-1 10–500 Swivel angle degree 30° to 90° Tailstock Quill stroke mm 20 Quill taper Morse No. 3 Motors Grinding wheel spindle motor kW 1.5 (2.2) Workpiece spindle kW 0.4 Table feed kW 0.4 Lubrication pump kW 0.01 Coolant pump kW 0.06 Magnetic separator (optional)kW 0.025 Power Supply Power consumption kVA 10 Voltage V 200 Frequency Hz 50 Tank Capacity Coolant tank liters 80 Lubrication tank liters 5 Workpiece center height from floor mm 1040 Required Footprint Width mm 2880 Depth x Height mm 1884 x 1600 Net weight kg 1900

Condition: reconditioned (used), Year of construction: 1979, functionality: fully functional, Fully rebuilt Danobat grinding machine. Disassembled, adjusted, painted, and operational. Includes various accessories. Video available for interested parties. Ijdpexwln Sefx Adnja

Year of construction: 2002, condition: ready for operation (used), General Data Measurements depth 3340 mm Measurements width 1960 Measurements height 2050 mm Machine weight 5000 kg Control Unit Brand FANUC Model Series 21i-T Iedpsxulfxofx Adnea This JUNKER EJ 29 CNC was manufactured in 2002. A robust cylindrical grinding machine, it features a grinding wheel diameter of 400 mm, motor power of 4.5 kW, and spindle speeds up to 1000 rpm. It can handle grinding lengths up to 600 mm and diameters up to 280 mm. Control is managed via a GE Fanuc Series 21i-T unit. Consider the opportunity to buy this JUNKER EJ 29 CNC cylindrical grinding machine. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,633 h, functionality: fully functional, machine/vehicle number: OE-70109, workpiece weight (max.): 500 kg, grinding length: 2,500 mm, grinding wheel diameter: 760 mm, controller model: FANUC SERIES OI-TF**, workpiece diameter (max.): 850 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025! Placing a bid obligates timely collection between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Maximum workpiece weight: 500 kg Maximum workpiece diameter: 850 mm Grinding length: 2,500 mm Grinding wheel diameter: 760 mm Maximum spindle speed: 2,200 rpm Grinding wheel peripheral speed: 45 m/s Maximum workpiece spindle speed: 500 rpm Clamping length: 2,600 mm Grinding wheel bore: 304 mm Spindle taper: MT 6 Tailstock quill stroke: 60 mm MACHINE DETAILS Control: FANUC SERIES OI-TF Dimensions & Weight Dimensions (L x W x H): 5,000 x 4,500 x 2,900 mm Total weight: 9,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 3 x 100 A Connection: 63 kVA Isdpfxexvbi Ae Adnsa Operating Hours Production hours: 2,633 h Operating hours: 7,052 h EQUIPMENT XACTOOLS robotic cell with loading unit EPSON industrial robot, max. payload: 8 kg Documentation

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: VECTOR078, total width: 3,000 mm, total length: 5,000 mm, total height: 2,500 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025. Placing a bid obligates you to timely collection between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! Isdpfx Ajxvbhrsdnja MACHINE DETAILS Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,500 mm Total weight: 10,000 kg EQUIPMENT Component placement system Coolant unit