Used Internal Circular Grinding Machine for sale (89,207)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Todpfx Aeuy Ifgjf Tof

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, External Cylindrical Grinding Machine Manufacturer: NAXOS-UNION (Germany) Model: W500 500 x 2500 mm Year of Overhaul: 2017 Technical Specifications: • Max. distance between centres: 2500 mm (full length can be ground) • Centre height: 250 mm Tsdexcvr Sopfx Af Tsf • Grinding wheel diameter: 600 mm • Grinding support travel: 320 mm • Max. workpiece weight between centres: 1500 kg • Grinding spindle speed, stepless: 900 – 1600 RPM • Workpiece spindle speed: 50 – 450 RPM • Workpiece spindle taper: MK5 / Morse 5 • Motor power: 2.2 kW • Approx. machine dimensions (L x W x H): 7800 x 3300 x 1750 mm • Approx. weight: 13 tonnes Accessories included: • 1x full machine enclosure incl. front sliding door with safety switch • 2x glass scales for X and Z axes incl. digital display Z300 from RSF-Elektrik, measuring system MSA • 1x new belt filter unit by SEITZ, type PFA 100, incl. 100 l/min pump and control system • 1x electromechanical balancing system by MPM, balancing head mounted on spindle, sensor at grinding spindle bearing • 1x live centre, manufacturer RÖHM MK5 • 6x grinding wheel flanges • 7x steady rests • 14x leveling feet Condition: Completely overhauled in 2017, very little use since. Negotiation basis: Price: ex works, loaded free on truck Collection after payment received and by prior appointment. Disclaimer: The seller shall not be liable for typographical or data transmission errors. Machine condition in terms of appearance, technology and wear corresponds to its age; used equipment is sold without any warranty. All prices are net.

Condition: used, grinding diameter 500 mm grinding length 2500 mm centre height 250 mm grinding wheel diameter x bore x width 600 mm taper bore of workpiece spindle 5 Morse taper of tailstock quill 5 Morse connected load 11,0 kW weight 6,5 t dimensions 5,5 x 2,2 x 1,8 m Cylindrical grinding machine with: - Frequency converter - Digital display - Internal grinding attachment - Belt filter system - Spare grinding wheel with holder - Stem and other accessories Todpfxsxz Hhns Af Tjf see pictures

Condition: good (used), functionality: fully functional, Scope as per attached images Todsxz Hfgjpfx Af Tof

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Cylindrical grinding machine – external / Manufacturer: WMW / Type: SA 6U x 3000 / YOM/Completely overhauled: 2013 (machine overhauler/carried out by SerWeMa/Germany) Range of parts: Straightening rollers, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. Todpfx Aoxymdajf Tjf The machine can be inspected under power by appointment. TECHNICAL DATA: Working range: - Centre height: 260 mm - Max. swing diameter: 515 mm - Max. grinding length: 3.000 mm - Max. grinding diameter: 515 mm - Max. workpiece weight: 500 kg Workpiece headstock: - Speed continuously variable: 12.5 - 355 rpm - Centring tip: Morse K5 Tailstock: - Max. quill stroke: 40 mm - Centring tip: Morse K5 Grinding headstock: - Grinding wheel: * Max. outer diameter: 630 mm * Width max.: 125 mm EQUIPMENT: - Extraction system - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2008, Gear grinding machines Reishauer RZ303 Todpfxexz E S Ee Af Tjf

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Tedewi H Uaspfx Af Tjf

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Todpfoxvquuex Af Tjf Year of manufacture: 2008 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Table extension

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw-cut optics optionally available Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Todpfxjff Hdio Af Tof Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: ready for operation (used), Year of construction: 2001, grinding length 800 mm grinding width 500 mm workpiece height 475 mm table-size 800 x 450 mm longitudinal feed 900 mm hydr. feed stepless 30 m/min cross feed autom. 1-30 mm vertical feeds: 1-99 My rapid traverse vertical 0,3 mm/min dimensions of grinding wheel 350 x 50 x 125 mm grinding spindle drive 7,5 kW total power requirement 9,37 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4 x 2,7 x 2 m Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding with automatic intermediate dressing and dressing compensation, including various infeed rates in the roughing and finishing cycles. Hydraulic longitudinal table movement, servo-controlled transverse movement, hardened ball screw of the highest precision, automatic lubrication of the longitudinaland transverse movement. Automatic vertical infeed via stepper motor with digital display. Dressing device for manual or automatic straight dressing of the grinding wheel. Electro-permanent magnetic chuck with automatic demagnetization and Tsdpfsxddr Aex Af Tof holding force control. Automatic spark-out, rapid traverse vertical adjustment. Machine dealer with own stock of 1600 m².

Condition: used, Technical details: grinding length: 630 mm grinding width: 250 mm workpiece height: 300 mm Table dimensions: 2050 x 340 mm Tjdpfsu Ngkmex Af Tef magnetic plate size: 600 x 250 (110V) mm feed range: Tisch: 0,005 - 0,045 mm/Hub feed of spindle: 0,001 - 0,045 mm/Hub dimensions of grinding wheel: Ø 220 x 46 mm total power requirement: 8,5 kW dimension machine xH: 2,1 x 1,8 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,31 x 0,5 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Tjdpexz E Srjfx Af Tef

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function Todpfx Ajxyhvkof Tof - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements B9errbkz8v - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Grinding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3600 mm Width/depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical data Total connected load 7.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 400 mm Clamping surface width 800 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: used, Year of construction: 1988, Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic chuck 400 x 175 mm - Hydraulic unit - Coolant system - Belt filter Todpfexl Umtjx Af Tjf - Automatic cross feed not functional - Year of manufacture: 1988 Specifications - Grinding area: 400 x 200 mm - Vertical adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: max. 225 x 50 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions (W x H x D): 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Tjdjhk Df Dopfx Af Tef Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Todpfx Afevvkipe Tef

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: Tedpfju Ngicjx Af Tjf -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information. Tsdpfx Ajxya Ekof Tjf Application Types Grinding

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Tjdpfxexx U N Us Af Tjf

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Tedjxx T N Tepfx Af Tjf Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Todpfxjhaf Nds Af Tsf Lamp Shields Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Tedpfowhqprex Af Tef

Condition: used, Year of construction: 2025, NEW ON THE MARKET! Universal belt grinding machine with extensive standard equipment and the ability to work vertically and horizontally. quick & easy replacement of the sanding belt quick & easy adjustment of the grinding angle quick change of the head position in the vertical-horizontal area Smooth speed regulation with RPM indicator 550W brushless motor Shock absorber to dampen vibrations during operation, regulates the tension and adherence of the belt to the material Aluminum drive wheel Aluminum guide rollers with bearings Belt covers in accordance with CE standards Todpjxzryvjfx Af Tsf Steel supports allowing for precise pressing of the workpiece to the tape Technical data Power 230V Engine 0.55 kW Tape speed 12-34 m / s Tape dimension 50x1000 mm Weight 20 kg Dimensions 440x340x420 mm WARNING!! The machine is a return. Crooked roller, broken motor fan cover and fan.

Condition: good (used), ABA EL 806 is a NC Surface grinding machine, built for precision, high accuracy and reliability. Capacities: table 800×500 mm; grinding 800×600×500 mm; table load 800 kg; travels X1100 Y600 Z530 mm. Wheel Ø400×100 mm (bore127), 1000–2600 rpm, spindle motor 11 kW, 3×380V; table speeds 2–35 m/min, cross‑feed ≤5 m/min, vertical feed 1–3000 mm/min (res. 0.001 mm). Accessories: diamond dresser on table, lamp, set of grinding wheels, electronic handwheel. Achieves tight tolerances; typical sectors: automotive, aerospace, machine tools, medical, watchmaking. Tsdpfx Afjxx U Nbs Tof

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Tedpfx Afewhqplo Tsf