Used Inserting Machine for sale (66,099)

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! Gjdpfx Akjzy Ukbo Usug The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, Gusdpfoq R Tnzex Ak Uog swarf auger.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, Guodpeyynvysfx Ak Ujg ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Guedpszyappofx Ak Uog Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Godpfx Aszy Ip Djk Ujug Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2006, Kern 2500 Document Inserter & Multimailer, Kern Man Machine Interface, 10 & 6 x 9" Infeed Hopper, (6) x Document Infeed Hoppers, 12 Position Carousel Packing Unit, Outfeed Conveyors, Cognex Scanner System, SMX 3.2m Footprint. S/No. 6017410.001 (2006) Godpfxjzwnuus Ak Usug Highest bid is subject to vendors approval. Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 Godjxyfmgepfx Ak Ueug - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. Godszu Tu Ijpfx Ak Usug DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Gusdpfxozuw Eqs Ak Ueg Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant Guedpfxjucdt Aj Ak Ueg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Gjdpfjzyccxox Ak Usug Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Gsdpfx Aszur Adok Ueug Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Gsdpfxszxgf Uj Ak Uoug Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Godpfox Saulox Ak Ueug

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Gujdpfxjzt H Tne Ak Usg Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Gujdjzt Iaiopfx Ak Ueg Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Gjdpfx Aszv Tizok Ueug Other feeders and camera's optional possible! Turnover module also available optional. Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - 1x AS2 shuttle feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. Gusdjzti Tkepfx Ak Ueg This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, Gusdpfexz Dqgex Ak Ueg toolpost, 3 jaw chuck, Coolant, interlocked guards

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. Godsyuc Hzopfx Ak Ueug All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Gedpfx Akswk Rlxs Uoug max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Gedpozx Anfofx Ak Ujug Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: used, Thread rolling machine UPWS 25. Gusdpfxjzd Rf Nj Ak Ujg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1.917.295, working width: 1,600 mm, passage height: 100 mm, overall weight: 500 kg, Equipment: CE marking, TECHNICAL DETAILS Minimum working width: 400 mm Maximum working width: 1,600 mm Maximum passage height: 100 mm MACHINE DETAILS Voltage: 400 V Current consumption: 16 A Fuse rating: 20 A Power: 5.2 kW Dimensions & Weight Gujdpjzxcdyofx Ak Ujg Dimensions (L x W x H): 2,800 x 800 x 1,600 mm Weight: 500 kg Transport packages: 1 EQUIPMENT CE marking

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm Gjdpfx Aszvduuek Ujug - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge