Used Inlet Band for sale (5,134)

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) Ffedpjifnxxsfx Aa Ejw EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm cutting speed 12 - 375 m/min Ffedpfsvnv S Tex Aa Esw turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp

Condition: excellent (used), Year of construction: 2005, Saw band dimensions: 4400 x 34 x 1.1 mm Cutting range at 90 degrees: round – 335 mm Ffodpfxeyrc Aqo Aa Ejw Cutting range at 90 degrees: flat – 500 x 335 mm Cutting speed: 15–150 m/min Machine weight approx.: 1,550 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting range at 90 degrees: round 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 90 degrees: flat 400 x 260 mm Cutting range at 45 degrees right: round 250 mm Cutting range at 45 degrees right: square 240 x 240 mm Cutting range at 45 degrees right: flat 240 x 260 mm Cutting range at 45 degrees left: round 250 mm Cutting range at 45 degrees left: square 250 x 250 mm Cutting range at 45 degrees left: flat 290 x 250 mm Cutting range at 60 degrees: round 160 mm Cutting range at 60 degrees: square 160 x 160 mm Cutting range at 60 degrees: flat 110 x 260 mm Cutting range at 60 degrees left: round 190 mm Cutting range at 60 degrees left: square 190 x 190 mm Cutting range at 60 degrees left: flat 210 x 190 mm Space requirement approx. 1700 x 2000 x 1600 mm Machine weight approx. 960 kg Fodpfeyrcy Ajx Aa Eofw

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: Fodpoytn Diofx Aa Ejfw - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Ffodpeyq T Inofx Aa Eew Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Ffedpfx Aajk Eai Us Ejw Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 700 mm Stand projection: 670 mm cutting depth: 430mm Table tiltable: yes 0 to + 20°. Table size: 700 x 930 mm belt speed: 18 m/min Motor power: 3 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Fedpfohpl Tqex Aa Esfw Machine length: 1260 mm Machine width: 750 mm Machine height: 2230 mm Weight: 420 kg

Condition: new, Year of construction: 2025, Roller diameter: 533 mm Stand projection: 510 mm cutting depth: 350mm Ffjdpfx Aash Ekx Se Ejw table swiveling: yes -0 to + 45° Table size: 750 x 530 mm belt speed: 1400m/min Motor power: 4,1 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 998 mm Machine width: 530 mm Machine height: 1987 mm Weight: 273 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 400 mm Stand projection: 390 mm Cutting depth: 280mm Table tiltable: yes 0 to + 20°. Table size: 500mm x 450mm belt speed: 18 m/min Motor power: 1,5 kW / 400V Ffodpfx Aehpl Tmoa Ejw Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 780 mm Machine width: 585 mm Machine height: 1735 mm Weight: 125 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 600 mm Stand projection: 585 mm cutting depth: 370mm Table tiltable: yes 0 to + 20°. Table size: 890 x 620 mm belt speed: 18 m/min motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1100 mm Fedpfjhpl Tfox Aa Eefw Machine width: 670 mm Machine height: 2050 mm Weight: 295 kg

Condition: as good as new (ex-display), Year of construction: 2025, Roller diameter: 800 mm Stand projection: 785 mm cutting depth: 500mm Table tiltable: yes 0 to + 20°. Table size: 1130 x 800 mm belt speed: 18 m/min Fsdpfjhpl Tuox Aa Eofw Motor power: 4 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1590 mm Machine width: 880 mm Machine height: 23900 mm Weight: 620 kg

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60 Ffedegulr Aspfx Aa Eow Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Year of construction: 2025, condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Ffodpfxsha Nz Us Aa Eow Weight: 185kg

Year of construction: 1976, condition: ready for operation (used), I sell the tenoning machine for parallel grooving for the bands in the pallets production, or some other similar product. Ffsdpjh Hp U Ssfx Aa Eew WACO T2-SL Year 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available immediately. Including documentation.

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Fjdpfx Asythxmsa Ejfw Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2025, machine/vehicle number: 0987, functionality: fully functional, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed The machine was bought in 2025 and has been working for about half a year. TECHNICAL DATA Dimensions and weights Length approx. 1400 mm Width/Depth approx. 685 mm Weight 185 kg Electrical data Drive motor power: 1.1 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Ffodoythuzepfx Aa Eew Machine data Saw blade speed(s): 45 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Coolant pump

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling Ffjdpfx Aswv Uq Aja Ejw - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: good (used), Used semi-automatic hydraulic band saw for metal Bianco MOD 330 SA 60° Blade dimensions: 3010x27x0.9mm Fsdpfx Aexpi E Ssa Eefw Cutting angle: up to 60° Two cutting speeds: 35/70 m/min Hydraulic vice Cutting capacity at 0° - round 250mm - square 220x220mm - rectangle 320x220mm Machine weight: 425kg Year of manufacture: 2006

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Fjdpfxowaauus Aa Esfw Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: good (used), Year of construction: 2011, machine/vehicle number: 08420, functionality: fully functional, edge thickness (max.): 3 mm, total length: 11,500 mm, overall weight: 8,500 kg, compressed air connection: 7 bar, Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right. IMPORTANT: Incl. LIGMATECH return conveyor Fsdpfewyp Nuex Aa Ejfw WORKPIECE & MATERIAL DIMENSIONS: Min. workpiece length : 150 mm Min. workpiece width : 65 mm Min. workpiece thickness : 8 mm Max. workpiece thickness : 40 mm (with corner rounding / copy function) Max. workpiece thickness : 60 mm (without corner rounding / copy function) Smallest workpiece : 150 x 150 mm, or 300 x 65 mm Workpiece overhang : 38 mm Edge thickness min/max : 0,3 – 3,0 mm Edge width min/max : 14 – 65 mm EQUIPMENT / SPECIFICATION BASIC MACHINE - Basic machine with 80 mm wide conveyor chain as workpiece transport device - Feed speed 6 to 30 m/min, adjustable from machine control - Top pressure with pressure-loaded guided rollers and 70 mm wide V-belt - Automatic height-adjustment of top pressure (thickness) - Workpiece support with rollers, extendable up to approx. 700 mm - Infeed table IMA 63.152, 500 x 500 mm, for easy feeding of long & narrow boards - Infeed device (manually) tiltable, with 5 driven rollers from top - Adjustable infeed guide/fence via NC axis AGGREGATES / EQUIPMENT - JOINTING TRIMMING/pre-milling (08.378), 2x4.5 kW, controlled (jumping), tool-Ø 125 mm Electronic horizontal positioning - GLUING AGGREGATE 04.1570 Concept, driven glue roller with automatic feed stop in case of error, Quick-lock system for glue application unit, Glue roller lift-off when feed stops Edge feed controlled by light barrier, upper edge guide w. step-motor, electronically controlled - Automatic PUR pre-melting system 283.203 - 6-fold automatic roll-change edging magazine POST-PROCESSING SECTION - End-trimming (snipping) unit 08.42, horizontal version, 2 motors each 0,65 kW, 200 Hz For straight and chamfer cutting, max. working speed 30 m/min - Fine trimming unit 08.055, 0,66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding 08.348, 2 motors 0,66 kW 400V 200 Hz, HSK 25 Max. working speed 20 m/min - Profile scraper 08.516, top/bottom, for multi-profile-knives, automatic positioning by step motors, max. 4 profiles, with electro pneumatic horizontal move-in/-out - Spraying devices for cleaning agent. - Flat scraper 08.521 (glue joint scraping), top/bottom - Profile (corner-) buffing 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS open compact • Flexible edge control • Uninterrupted power supply (UPS) • Power supply 400 V, 50/60 Hz, Control voltage 24 VDC / 230 VAC Machine dimensions (occupied area when installed) L 1150 x W 300 x H 260 cm Available: October 2025

Condition: used, Year of construction: 2000, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, COSMEC SM 400 Multirip Saw Technical Data: • Track width: 400 mm • Max. cutting height: 160 mm • Max. saw blade diameter: 350 mm • Infinitely variable feed adjustment • Automatic lubrication system • Anti-kickback protection • Fence (culaga) Fodpfx Aasytcrus Ejfw • Extraction port: 260 mm • Safety switch • Power supply: 380 V • Main motor power: 34.5 kW YEAR OF MANUFACTURE: 2000

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting Fodpfx Aajyqanbj Esfw - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: new, 1 brand new semi-automatic high-performance horizontal band saw with double column guidance and 2° cutting angle relative to the table surface Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical Data: - Cutting capacity 90° round: 330 mm - Cutting capacity 90° rectangular: 360 x 330 mm - Cutting capacity 90° square: 330 mm - Cutting capacity 45° round: approx. 250 mm - Cutting capacity 45° rectangular: approx. 250 x 325 mm - Cutting capacity 45° square: approx. 250 mm - Saw blade size: 5000 x 34 x 1.1 mm - Infinitely variable band speed: 20 -100 rpm - Working height: 635 mm - Motor power: 3 kW - Hydraulic motor: 0.55 kW - Dimensions (L x W x H): 2830 x 920 x 1630 mm - Machine weight: 1030 kg Accessories / Special Features: • Semi-automatic double-column band saw • Linear guides • 2° bevel cut to table surface • Infinitely variable cutting speed via potentiometer at control panel • Hydraulic vice • Hydraulic-mechanical saw blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment Ffedpfx Ajfk Eu Nja Eow • Heavy-duty gearbox • Coolant system • Feed roller conveyor 1200 mm • Chip removal brush • 1 pc. Bi-metal saw band • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: excellent (used), MANUFACTURER: DANOBAT S. Coop. Ltda. YEAR OF CONSTRUCTION: 1988 SERIAL NO.: 35 POWER IN KW: 28 Table size: 2000 x 600 mm Indexing table: 600 mm Automatic Feed / Creep / Cycle X-travel: 3000 mm Y-travel: 1 mm Ffsdpfxeyr S Tlo Aa Eow Z-travel: 650 mm Table length: 3000 mm Table width: 1000 mm