Used Injection 2000 T for sale (75,215)

Condition: used, Year of construction: 2000, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (610) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1598 bar Stroke volume: 399 cm³ Shot weight (PS): 360 g Max. dosing stroke: 203 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Kodpsz D U Hbofx Anusnc Hopper capacity: 70 l

Condition: good (used), Offer 26117 Technical data: - Worktop, approx. dimensions: W 2000 x D 700 mm - Worktop thickness, approx.: 45 mm - Working height, approx.: 850 mm - 2 pcs. drawers on roller bearings - Drawer extension, approx.: 80% - Drawer dimensions, approx.: W 500 x D 500 x H 150 mm - 2 cabinets with doors - Space required, approx.: W 2000 x D 700 x H 850 mm - Weight, approx.: 100 kg Knsdpfxjzkg E Eo Anujc

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: Ksdjzw H Dbspfx Anusnc 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setup tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. Knedpfxjz H Ugaj Anuec AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed Knjdpsn Sl Dbjfx Anuec - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min Ksdpfx Aszd Su Eonusnc rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Barfeeder Interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR240-2 2000 Industrial Robot, including control cabinet 57250 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Ksdpfsz Ru D Ujx Anuenc Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Control cabinet: 57250 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: good (used), Newtec 2000 / PE320 Electronic Weigher Industrial Newtec electronic weighing machine, model 2000 / PE320, suitable for weighing fresh produce and food products as part of an automated packing line. Designed for accurate and consistent product weighing and suitable for integration with downstream bagging or packing equipment. Kjdpfxezzzdws Anusnc Stainless steel food-processing construction with multiple weighing components and product feed/discharge arrangement.

Condition: used, MDR 2000 Knodezul Dbepfx Anujc Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, Knedpfx Anjzg Twaoujc rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Kedpfx Aoz D Dt Dsnusnc Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Knsdpez D Uyuofx Anujc Shot weight (PS): 570 g Max. dosing stroke: 225 mm Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: good (used), Brand: Videojet Type: Inkjet Marking Machine Model: Excel 2000 Knsdpjyt Hmpsfx Anuoc

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Pressta Eisele Pressta 2000 – hydropneumatic corner joint press (crimping machine) for aluminum window and facade construction Ksdpfoz H Ntbox Anujnc -Hydropneumatic cylinders -Profile height: 200 mm under the lower clamp -Max. insertion depth: 150 mm -Counter support height: 150 mm

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Kjdpfx Anozl A Raeuenc Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Knedpozv S Tlofx Anujc Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Kodpfezizkyjx Anusnc Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 Kjdpsz Rl T Tofx Anuonc - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB Knedez Ezrmepfx Anuec bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,020 mm, turning diameter over cross slide: 580 mm, spindle motor power: 22,000 W, travel distance X-axis: 565 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,080 mm, rotational speed (max.): 4,500 rpm, overall weight: 12,000 kg, For Sale: Mori Seiki MT2000SZ Multi-Axis Turn-Mill Center For sale: A highly versatile and efficient Mori Seiki MT2000SZ multi-axis CNC turn-mill center for demanding industrial production. This machine enables complete machining of complex components in a single setup using its main spindle, sub-spindle, B-axis milling spindle, and lower turret. General Information Manufacturer: Mori Seiki Model: MT2000SZ Control Unit: MAPPS / MSG-501 (Fanuc) Year of Manufacture: 2001 Technical Specifications Capacity & Travel: Max. Turning Diameter: 550 mm Max. Turning Length: 1,020 mm X-axis Travel: 565 mm Y-axis Travel: ±80 mm Z-axis Travel: 1,077 mm B-axis (Milling Spindle): ±120° (0.001° indexing) Main Spindle & Sub-Spindle: Main Spindle Speed / Power: 4,500–6,000 rpm / 22 kW / Bar Capacity Ø 65–73 mm Sub-Spindle Speed / Power: 4,500–6,000 rpm / 15 kW C-axis: Both main and sub-spindle (0.001°) Kedpfxozy Ntkj Anuonc Milling Spindle (Upper Head) & Tool Magazine: Milling Spindle Speed: 10,000 rpm Milling Spindle Power: 7.5 kW Tool Magazine (ATC): 60 positions Lower Turret: Tool Stations: 12-position turret (live tooling) Live Tooling Speed: 4,000–6,000 rpm Dimensions & Weight: Dimensions (L x W x H): approx. 3,830 mm x 2,881 mm x 2,650 mm Machine Weight: approx. 12,000 kg Features & Equipment Multi-Axis Configuration: Main spindle, sub-spindle, B-axis milling head, and lower turret Upper Head (Milling Spindle): Full B-axis for driven tools with Automatic Tool Changer (ATC) Lower Turret: Independent lower turret for flexible and high-efficiency simultaneous machining Included Accessories: Plenty of tools, chuck jaws, and user manuals, etc.

Condition: used, functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000-CUT, laser power: 2,000 W, input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: cooling unit, We are offering this used IPG Laser YLS-2000-CUT. Model name: YLS-2000-CUT Serial number: 16126751 Rated voltage: 400-460 V AC 3P/PE Frequency: 50/60 Hz Rated current at full load: 15.2 A Fuses: 20/120 A/kA Drawing number: G25-16-130212-7 Date of manufacture: December 2016 with the corresponding water chiller: IPG chiller Model LC 71.01-A.4.5/6 Ksdpfx Aezhcvnenuenc Date of manufacture: 2018 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Siemens control system 808D MM+ Working area Swinging diameter over bed (max.) 500 mm Swinging diameter over support 300 mm Workpiece length 2,000 mm Turning length (max.) 1,700 mm Ksdpfx Anjz Hmz Aousnc Travel distances X-axis 270 mm Z-axis 1,900 mm Main spindle Speed range 60 – 2,000 rpm Spindle mount A2-8 Chuck diameter 250 mm Spindle bore with draw tube 70 mm Rapid traverse X-axis 6,000 mm/min Z-axis 8,000 mm/min Tool carrier Number of tool positions 8 Accuracy Positioning accuracy X / Z ± 0.012 / ± 0.016 mm Repeatability X / Z ± 0.01 / ± 0.014 mm Tailstock Tailstock taper MK 5 Quill diameter 75 mm Quill stroke 150 mm Drive power Main drive 18.5 kW Main drive, constant load 15 kW Torque drive X / Z 10 / 15 Nm Coolant pump 0.125 kW Dimensions and weights Dimensions (L × W × H) approx. 4.12 × 1.75 × 1.84 m Weight 3,600 kg The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe Knsdjxdiigspfx Anujc - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: good (used), Offer 25348 Technical Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of top plate approx. 80 mm - 8 pcs. T-slots in table surface, length 5500 mm - Center distance between T-slots in table surface: 255 mm each - Center distance of T-slots from outer edge: 110 mm - T-slot width approx. 40 / 60 mm - T-slot depth approx. 62 mm - Required space: L 5600 x W 2020 x H 350 mm - Weight approx. 10,200 kg Knjdpjxu Evwefx Anujc

Year of construction: 1982, condition: used, machine/vehicle number: 391; Lg-Nr. 13100, Technical specifications: - Load capacity 2000 kg - Max. load capacity, horizontal 3500 kp - Turntable diameter 1750 x 1750 mm Knedpfxobp Thhj Anuec - Turntable extensions - Turntable can be swivelled via geared motor 0 - 90° - Rotational speed, electrically adjustable in a stepless manner: 0.2 - 1.5 m/min - Right-hand/left-hand rotation - Welding current transmission 1200 A - Power supply 400 V - Table height in horizontal position with base frame approx. 2070 mm - Table height in horizontal position without base frame approx. 940 mm - Space required approx. W 1650 x H 1130 / 940 x D 2500 mm - Weight approx. 2.2 t