Used Index Gu 800 for sale (138)

Condition: excellent (used), Year of construction: 2012, INDEX V300 Vertical CNC Turning Center Power: 87 kW Year: 2012 1 turret with 10 tool positions CNC: SIEMENS SINUMERIK 840D sl Part conveyor Approximately 8 tool holders, including powered tool holders Djdpjzlalnsfx Al Aowc Chip conveyor Tilting and forkliftable chip bin, GOUBARD 5-level shelving

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Dwjdpsz Hzdxsfx Al Aec

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Dwedpfx Aezlqavsl Aec

Condition: good (used), Year of construction: 2014, See documents. List of individual machines with operating hours, etc. – see documents. Dwedpfx Alszqtg As Asc

Condition: used, Year of construction: 2007, Offers considered prior to auction Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150551 (2007) with Siemens Sinumerik/Index C 200-4D Control, Imeca SIR-MS32/33/P Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dwsdpfjz Ialqox Al Ajc

Condition: ready for operation (used), Year of construction: 2011, operating hours: 27,865 h, bar diameter (max.): 24 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 6, This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details. - Nominal Voltage: 400 V- Rated Current (In): 99 A- Short Circuit Current (Icu): 50 kA- Peak Current (I2): 3.6 kA- Maximum Backup Fuse: 100 A- Rated Power: 64 kW- Connected Load: 67 kVA- Frequency: 50 Hz- Control Voltage: 24 VDC- Operating Hours: 124,075 h- Hydraulic Operation Hours: 61,189 h- Operating Time: 37,971 h- Production Time: 27,865 h- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system Technical Specification Counter Spindle Yes Dwsdpsz Ahy Iofx Al Asc

Condition: ready for operation (used), Year of construction: 2002, bar diameter (max.): 32 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 12, This 12-axis Index MS32-P multi-spindle turning machine was manufactured in 2002. It features a Sinumerik 840D control system and includes a SIR MS32 face loader for efficient bar loading. The machine is equipped with a robust coolant system, including high-pressure pumps and a fire suppression system. If you are looking to get high-quality turning capabilities, consider the Index MS32-P machine we have for sale. Contact us for further details. Dwsdjz E Inhopfx Al Aec - Main Spindles: 6x Drive spindle in drum- Counter Spindle: 1x Counter spindle (Position 6.3 Z with three-jaw chuck)- Axes Configuration: CNC driven and programmed - Slide 1: 1.4 X/Z - Slide 2: 2.4 X/Z - Slide 3: 3.1 X/Z, 3.2 X/Z, 3.4 X/Z - Slide 4: 4.1 X/Z, 4.2 X/Z, 4.4 X/Z - Slide 5: 5.1 X/Z, 5.2 X/Z, 5.4 X/Z - Slide 6: 6.1 X/Z, 6.3 Z- Additional Drives: 6x Auxiliary electric drives for cross-drilling or milling units (3 per NCU)- Control System: Sinumerik 840D (Index C200-4D) Dual NCU- Material Handling / Automation: Part catcher with conveyor belt- Bar Loader: SIR MS32 Face Loader- Coolant System: Connected to central coolant supply system (Knoll System)- High-Pressure Pump 1: 80 bar (24 liters/min at 80 bar)- High-Pressure Pump 2: 40 bar (55 liters/min at 55 bar)- Low-Pressure Pump: 250 liters/min at 3 bar- Fire Suppression System: Included- Coolant Mist Extraction & Filtration System: SH 2000-PEV-T/TR (two-stage design)- Process Monitoring System: Integrated ARTIS process monitoring system (DEFECTIVE)- Synchronization Device: For quill spindle position 6 (counter spindle)- Tooling Components: WTO driven tool holders visible in machining area- Tooling Status: Offered as basic machine without tools, holders, or live tool units (tools and bar feeder accessories available upon request) Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Control: Index Bar loader: Index/Hydag Dwsdpfx Aljyzicwo Aec Maximum bar diameter: 42 mm Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.

Condition: excellent (used), Year of construction: 1999, - Manufacturer: INDEX - Model: ABC - Machine Type: CNC turning center - Max. bar diameter: 52 mm - Max. main spindle speed: 5,000 rpm - Main spindle power: up to 20 kW - C-axis: available - Synchron/counter spindle: available - Max. counter spindle speed: 4,500 rpm - Max. clamping diameter of counter spindle: 42 mm - Turret 1: 8 tool stations - Driven tools: available - Max. speed of driven tools: 6,000 rpm - Tool drive power: 3.3 kW - Turret 2: 6 tool stations - Linear tool carrier: max. 6 tools - Rapid traverse: up to 24 m/min - Coolant tank: 210 l Djdpfx Alsz E Hu To Aewc - Hydraulic pressure: 90 bar - Machine height: 1,750 mm - Footprint: approx. 2.4 m² - Machine weight: approx. 2,500 kg - Bar loader: up to Ø 52 mm - Chip conveyor: available - Workpiece removal via conveyor belt: available

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Djdpfxez Hb Nhe Al Aewc Counter Spindle No Driven Tools Yes

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Dedpfx Ajzu Sz Tol Ajwc

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Djdpfx Aleznmxme Ajwc

Condition: excellent (used), Year of construction: 2007, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm Dwsdpfxezwhkpo Al Asc 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Coolant system

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Dedpfx Ajy Sq T Sjl Aswc Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, Dodpjlmkucjfx Al Aswc - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, - extraction device, - settling device, - Accesories

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Dsdszkld Tjpfx Al Ajwc

Condition: used, Year of construction: 1996, INDEX ABC multi-spindle automatic lathe with INDEX control system, serial number 400923, year of manufacture 1996, operating hours estimated at approximately 57,805 hours according to management; chip conveyor by KNOLL; bar feeder FMB Turbo 5-42/3200; known damage and defects: defective. Dwjdpfeztc N Eex Al Aec

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! Djdpfx Alexc Idmo Ajwc *

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 10 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 160 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] - Rapid traverse rate : 50 [m/min] - Spindle / counter-spindle distance : 710 [mm] UPPER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 320 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] UPPER RIGHT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X stroke : 180 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] LOWER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 550 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 64 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.618 x 1.794 [mm] - Machine height : 2.139 [mm] - Machine weight : 9.000 [kg] MACHINE HOURS - Number of hours under power : 59431 [h] - Number of spindle hours : 29663 [h] EQUIPMENT - CNC : C200-4D (SIEMENS 840D) - Interface : Ethernet / USB Dwodozz Aymopfx Al Aec - 3 colors status lamp - Options : Transmit / Tracyl - Tool breakage detection - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Spindle cooling unit - Coolant through spindle : et tourelles - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : INDEX MBL capacité 3.000 [mm] - Collet chuck : 2 HAINBUCH Spanntop Kombi Axfix Ø65

Condition: good (used), Year of construction: 2001, INDEX ABC multi-spindle automatic lathe with INDEX control, serial number 401566, year of manufacture 2001, operating hours estimated at approximately 44,285 hours according to management, chip conveyor DGS, bar feeder FMB 5-42/322/A. Dwsdpoztc Rvjfx Al Aoc

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 6 - Number of turrets : 3 MAIN SPINDLE - Spindle power : 29 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 4.2 [kW] - Spindle speeds : 4500 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 280 [mm] UPPER LEFT TURRET - Number of positions : 5 - Tool type : VDI25 UPPER RIGHT TURRET - Number of positions : 8 - Number of motorized positions : 8 - X/Z stroke : 90/280 [mm] - Tool type : VDI25 - Live tools speed : 4500 [rpm] - Live tools power : 4.2 [kW] LOWER LEFT TURRET - Number of positions : 6 - X/Z stroke : 81/80 [mm] Dwodpfx Alezwqtme Aec POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] EQUIPMENT - CNC : INDEX C200-4D - Coolant tank : KNOLL * with high-pressure pump : 40 [bars] * with paper filtering unit - Chips conveyor - Oil mist extractor - Parts catcher - Parts conveying strip - Bar loader : BREUNIG - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Cnc multispindle lathe INDEX MS16C Dedpfx Aloztk A Tj Ajwc

Condition: used, Cnc multispindle lathe INDEX MS32C Dedszpznljpfx Al Aowc

Condition: used, Cnc multispindle lathe INDEX MS16C Dwjdpfx Aljztk A Hj Aoc

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Djdpfx Alsy Tmhze Aowc Chip discharge height: 1,250 mm