Used Index Gu 600 for sale (142)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, INDIVIDUAL MODULES: 1. SEMI-AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unloading glass bottles from pallets; requires one operator to place the pallet into the machine and remove the cardboard sheets inserted between the bottle layers. 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of bottles prior to filling. 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling hot product into cylindrical glass bottles. 4. CLOSING MACHINE FOR TWIST-OFF CAPS (model: IND-Close 12E) for vacuum sealing filled bottles using a steam-injection-induced vacuum system. Dcsdpfsw Hg Hqsx Ab Tsr 5. PASTEURIZATION AND COOLING TUNNEL (model: PT 42-9) for continuous pasteurization and subsequent cooling of the product. 6. VACUUM TESTING MACHINE (model: IND-Test 61) for detection and rejection of improperly sealed bottles. 7. DRYING MACHINE (model: IND-Blow 86) for removing residual moisture from the bottle surface prior to labeling. 8. LINEAR LABELLING MACHINE FOR SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over cap) and side label application on cylindrical bottles. 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing bottles onto cardboard trays in various configurations according to bottle size. 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) interconnecting the line modules, including covered conveyors between rinsing, filling, and closing sections.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device Dcodsv Raatspfx Ab Ter - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm Dcodpfx Abewab Rds Tor • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm Dedjvzcnzjpfx Ab Tjcr number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device Dodpfx Abevh Naqo Tecr - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: good (used), Year of construction: 1997, feed length X-axis: 70 mm, feed length Z-axis: 140 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, type of input current: three-phase, number of spindles: 6, spindle speed (max.): 5,000 rpm, collet bore: 42 mm, bar diameter (max.): 42 mm, power: 72 kW (97.89 HP), overall weight: 10,500 kg, Equipment: documentation/manual, multi spindle Dcjdpfx Aslp Nr Aob Tsr

Condition: good (used), Year of construction: 1997, Index ABC Year of manufacture 1997 Machine number 400621 Spindles: 1 Max diameter: 50 mm turrets: 2 Positions: 8 on turret 1 / 6 on turret 2 C axis is programmable 1 synchronous spindle in the machine + 2 for regeneration Dedpjhd U Hfofx Ab Tecr High pressure pump: yes, 30 bar

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Dedpfjwylz Tox Ab Tjcr Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. Dsdeqhkukjpfx Ab Tjcr The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement.

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° Djdpfxovzcnbe Ab Tecr CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm Dcsdjt U R Hzopfx Ab Tor tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: new, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Dodpfx Abswcq Tys Tscr Storage traces

Condition: new, Year of construction: 2023, General Control : Siemens 840 DSL Main spindle Material passage : 65 mm max. speed : 5.000 rpm Spindle passage : 85 mm Spindle head : AD140 Drive power : 27 kW Torque : 145 Nm tool turret Tool holders : ISO-10889 Number of stations : 2 x 12 Number of driven tools : 2 x 12 Max. Speed : 6.000 rpm Travel Y : ±60 mm B-axis : 360 degrees Workpiece infeed and outfeed Type : Schnaithmann Designed for : 12 pallets Pallet size : 160mm x 200mm Total load of the system max. : 500 kg Equipment Chip management : Chip conveyor Coolant management : Eco-Fluid coolant system : switchable 8/80 bar Coolant tank : 750 l with paper belt filter Dcjdpsrxc Eiofx Ab Tjr

Condition: excellent (used), Year of construction: 1990, 1 x multi-spindle automatic lathe Index MS 25 Year of manufacture: 1990 Dcsdpfsu Hgdujx Ab Ter with loading magazine Iemca PRA 40/33 P Lots of accessories. The machine can be viewed under power.

Condition: used, functionality: fully functional, spindle bore: 12 mm, feed length Z-axis: 50 mm, Automatic single-spindle lathe for screws Dsdpfxowvigre Ab Tecr

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Dedpfxjvitznj Ab Tjcr Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: new, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball Screw Item ID: 10912112 Previous Item ID: GM2602.1551 Djdpowb Evmefx Ab Tscr From stock/wear - Offer as shown in pictures -