Used Index Gs 30 for sale (162)

Condition: used, Year of construction: 2003, INDEX MS32G Overhauled completely: 2020 Original mfd. 2003 6 Spindles Isdpew A S H Uefx Akxjia 32mm Capacity Siemens 840D control Equipped as pictured Kraft & Bauer fire extinguishing system All spindles on the machine were overhauled 2 years ago incl. clamping cylinder except for one on the GSP. - GSP is equipped with Hainbuch Spanntop and used Röhm jaw chucks - No tools are included - No FZ tubes / no bar pusher - Last year, spindle encoders on the HSP incl. GSP were completely renewed. Equipped with Lenord & Bauer IEMCA SIR-MS32/33/P See attached specifications.

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Iisdpfxswt Unvo Akxoa Contact us for full specifications

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed Isdpjt Rkzwofx Akxeia SIR MS52/F Type 38 XL Mfd. 2005

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Iijdpfexnrtcsx Akxsa Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Internal item no.: 25088 Iiedpfoxu Dcvjx Akxea Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of spindles: 6, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6 spindles High pressure 80 bar Isdpfxexuiqxe Akxoia 1 polygon device Parts removal possible with external unit IEMCA Sir-MS 22 – loading magazine

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of spindles: 6, bar diameter (max.): 40 mm, Equipment: rotational speed infinitely variable, High pressure 80 bar Y-axis in position 5.1 Polygon turning device Ijdpfx Ajxuikrjkxsia Part removal possible with external unit Index MBL 40-6 – bar feeder

Condition: used, Cnc multispindle lathe INDEX MS42C Iiodpjxzu Trefx Akxsa

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW Iodpov Raatsfx Akxoia - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, Year of construction: 1998, turning diameter 200 mm turning length 400 mm control SIEMENS SINUMERIC 840 C Iedot Hw Rkopfx Akxjia total power requirement 40 kW weight of the machine ca. 6.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm Iisdpfst U R Hzjx Akxea travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device Iiodpfx Asvh Naqekxea - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2015, operating hours: 34,044 h, functionality: fully functional, machine/vehicle number: 270240, number of spindles: 6, bar diameter (max.): 22 mm, bar length: 3,000 mm, spindle diameter: 40 mm, TECHNICAL DETAILS Number of spindles: 6 Spindle bore: 40 mm Bar diameter: 22 mm Bar loader length: 4.70 m Bar length: 3.0 m MACHINE DETAILS Rated voltage: 400 V Rated power: 60 kW Connected load: 71 kVA Maximum fuse: 125 A Line voltage: 400 V Electrical frequency: 50 Hz Control voltage: 24 V DC On-time: 50,134 h Hydraulics on: 43,972 h Running time: 38,809 h Production: 34,044 h EQUIPMENT - Complete replacement of the energy supply for all 6 main spindles in April 2025 - Single-NCU without PCU - Bar feeder Iemca SIR MS22 P 33 (year of manufacture 2015) Iedpsw T Rygofx Akxsia

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min Iiedpjwylz Tjfx Akxea High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] Isdev Ig Avopfx Akxeia - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - maxi feeding length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT - sub-spindle - foot and drum Iiedjuhanaspfx Akxoa

Condition: excellent (used), Year of construction: 1990, 1 x multi-spindle automatic lathe Index MS 25 Year of manufacture: 1990 with loading magazine Iemca Ijdpfxsu Hgduj Akxjia PRA 40/33 P Lots of accessories. The machine can be viewed under power.

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC Ijdpsuhatpofx Akxsia - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC Iijdsuhaxlspfx Akxoa - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis, Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - Parts catcher with conveyor in position 6 - Cross drilling device in position 3.1 et 4.1

Condition: used, Single-spindle lathe INDEX B42 Ijdpext U H Nsfx Akxeia

Condition: used, Single-spindle lathe INDEX B60 Ijdpfxjxt U Igj Akxjia

Condition: used, Single-spindle lathe INDEX B60 Iedpjxt U Nkjfx Akxsia

Condition: used, Single-spindle lathe INDEX B60 Iiodext U Nqjpfx Akxoa

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC Iisdpfx Ajuhatcekxea - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] Iisdpfx Aouhbgwjkxea - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C