Used Imagesetter Poland for sale (1,341)

Condition: new, Year of construction: 2026, Complete set of jaws for Metso LT95 / C95 – large tooth, new type Guedjz Duv Nepfx Af Tji This advertisement concerns a complete set of crushing jaws for the Metso LT95 / C95 crusher. The jaws have a profile with a large tooth and are made according to a new design. The set includes: - Fixed jaw – weight 868 kg. - Moving jaw – weight 710 kg. Material composition: 18% manganese, 2% chromium, and the rest is iron. Price for the complete set, EXW Poland. We can arrange shipping worldwide. Our offer also includes other spare parts and consumables: wedges, side plates (cheek plates), toggle plates, toggle plate housings, wear rings, distribution plates, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC, and BOWEX couplings, linings, grizzly grates, and many other components for routine repairs and major overhauls of these machines. Only with us is the chemical composition of the castings confirmed by a QUALITY CERTIFICATE and spectrographic analysis. Do not buy cheaper, lower-quality castings – too low a manganese or chromium content can reduce the lifespan of the jaws by up to half! We offer the widest range of spare parts for crushers and screeners in Poland – for both stationary and mobile machines. We offer parts for machines from brands such as: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab, and others.

Year of construction: 1976, condition: used, Year of manufacture: 1976, overhauled: 2003 Maximum pressing force: 500 KN, Maximum extraction force: 400 KN, Maximum holding force in the pressing position: 400 KN, Maximum die return force: 20 KN, Upper punch stroke: 120 mm, Upper punch section: 220 mm, Number of strokes: 7-32 1/min, Maximum filling height: 180 mm, Maximum pressing stroke: 90 mm, Maximum extraction stroke: 90 mm, Maximum pressing stroke: 12 mm, Pneumatic upper punch tension: Maximum: 100 mm, Compressed air supply, Air consumption, Intake air: 200 1/min, Total connected load: 18.00 kW, approximate width: 2000 mm, approximate depth: 1700 mm, approximate height: 3250 mm, Gsdjzmh Rhjpfx Af Toui press weight (approximate): 5,500 kg, press housing: 190 l (running oil), operating noise: 78 dB (A)

Condition: ready for operation (used), very good condition available immediately Guedpozgdcmjfx Af Tji 54x72 size

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Gedpfx Afez Dtbdj Toui Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. Guodpfx Afsz Dt Tyo Tsi We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 648 kW (881.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,000 kg, input voltage: 400 V, total width: 2,300 mm, total length: 7,000 mm, total height: 2,600 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE RTAC 185 648 KW Cooling capacity: 648.0 kW / 184.25 tons (12/7 — 35°C) Year of manufacture: 2009 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Trane CHHP0N2TKG0N134A (screw) + 1 pcs. Trane CHHP0N1TKG0N112A (screw) Gedpfx Afez Dub So Tjui Type of refrigerant: R134a Number of fans: 13 pcs. Dimensions: 7x2.30x2.6 m Weight: 6000 kg Working hours: 6001/6038 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,937 h, functionality: fully functional, machine/vehicle number: S2550XJ, total length: 1,700 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, input current: 5 A, overall weight: 700 kg, input frequency: 50 Hz, table width: 1,140 mm, For sale: Beck Packautomaten S2550XJ automatic packaging machine, manufactured in 2018. This machine is designed for the automatic film packaging of products. It is a unit from the renowned German manufacturer Beck Packautomaten GmbH & Co. KG and is equipped with a Siemens HMI control panel. Machine details: • Manufacturer: Beck Packautomaten GmbH & Co. KG • Model / Type: S2550XJ • Year of manufacture: 2018 • Operating time: 2,937 hours • Voltage: 230/400 V • Frequency: 50 Hz • Current: 5 A • CE marking • Control panel / Siemens HMI • Automatic film packaging system Gujdpfez D Uviox Af Tsi Condition: Used, in very good technical condition. The machine . A video showing the machine in operation is also available upon request. The buyer is responsible for arranging transport and the collection/dismantling of the machine.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 53.6 kW (72.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 701 kg, input voltage: 400 V, total width: 2,250 mm, total length: 1,400 mm, total height: 1,800 mm, warranty duration: 12 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump LENNOX GAH055SM2M 53.6 kW/54 kW Cooling capacity: 53.6 kW / 15.24 tons (12/7 — 35°C) Heating capacity: 54 kW / 15.35 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP120KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Dimensions: 1.4x2.25x1.8 m. Weight: 701 kg. Working hours: 74/58 h. Condition: Outlet CONDITION, TESTING & READINESS Gusdpsz R Rhdjfx Af Tei The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Plate lifting manipulator Lifting capacity: 250 kg Base height: 350 cm Arm length: 558 cm Gujdpfx Afo Adqmwo Tji 4 suction cups Used, in good condition.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 80 kW (108.77 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,160 kg, input voltage: 400 V, total width: 1,110 mm, total length: 2,610 mm, total height: 1,930 mm, warranty duration: 12 months, AIRCOOLED CHILLER CLIMAVENETA NECS-C/HT 0302 80 KW Cooling capacity: 80.0 kW / 22.75 tons (12/7 — 35°C) Year of manufacture: 2017 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. (centrifugal) Hydraulic module: 1 pcs. water pump Ebara DWC-VI 500/3.0 IE3, expansion vessel. Dimensions: 2.61x1.11x1.93 m Weight: 1160 kg Working hours: 0/0 h. Gujdpfez Hkx Eex Af Toi Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), functionality: fully functional, mileage: 52,000 km, power: 180.2 kW (245.00 HP), fuel type: diesel, maximum load weight: 25,000 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2022, operating hours: 11,000 h, Equipment: air conditioning, differential lock, parking heater, Kamag PT Precision Tractor – a terminal tractor designed for transporting all types of standard and mega semi-trailers within logistics terminals, factories, production plants, etc. Purchased and serviced by Kamag Poland, full documentation Ready for work Gusdoz H Tzpepfx Af Toi 2 units available! Specifications: – Year: 2022 – Mileage: 11,300 mth/52,000 km – Automatic gearbox – Deutz 6-cylinder engine – Hydraulically raised fifth wheel for semi-trailer transport Equipment: rear air suspension differential lock air conditioning webasto pneumatic driver’s seat The vehicle is available for viewing at our lot in Krakow. Please contact us before visiting to confirm availability and schedule a viewing. We can send additional photos and videos of the vehicle. If you have any questions, please contact us by phone or WhatsApp at pokaż kontakty Additionally, we offer: Export plates and insurance Transport to any location within the EU, Ask the seller for details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,500 h, machine/vehicle number: M71311, stroke length: 300 mm, operating speed: 110 mm/s, reverse speed: 10 mm/s, table height: 960 mm, overall weight: 15,000 kg, total length: 4,000 mm, total width: 1,600 mm, total height: 2,800 mm, pressing force: 160 t, distance table to ram: 590 mm, table length: 3,060 mm, table width: 90 mm, year of last overhaul: 2026, Equipment: safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 160-3100 NS (160T - 3060 mm) Tooling system: WILA Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Pressing force: 160 T - Bending length: 3060 mm Gujdez Ibnyjpfx Af Tsi - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Back gauge controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - Light curtain - programmable - WILA tooling system - Hydraulic punch clamping and hydraulic die clamping - Lower table compensation - "CROWNING" - CNC controlled - Front supports - 2 pcs, 150 kg/pc, length 950 mm

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: PJ000400, Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Gedpfspahr Aex Af Tsui Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: used, Year of construction: 2012, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 7,000 kg, Quaser MV184 P 3-axis cnc center passes: X1020mm Y610mm Z610mm Table size 1200x600mm Spindle 22-30Kw max 12000 rpm Tool magazine 30 pieces BT40 Gedeufh Dkspfx Af Toui Renishaw OMP40 measuring probe Spindle cooling 20 bar Fanuc 31i control with USB 1GB memory with machine chip conveyor, tools, measuring probe, documentation of the machine very good condition of the machine

Condition: good (used), Year of construction: 2001, Agiecut Challenge 3 Year 2001 XYZ - 500x350x256 UV axis - +-70mm Maximum coveted 30° at 100 mm height Maximum pieces 1050x650x250 Gedpfouanm Ijx Af Teui Maximum weight 400/800 kg Machine dimensions 2800x2400x2220mm Machine weight 4t500kg

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Guedewathhspfx Af Tei Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Condition: used, functionality: fully functional, axle configuration: 3 axles, loading space volume: 35 m³, tire size: 385/65/22.5, Year of construction: 2001, Equipment: ABS, With counter and gravity unloading; upper and bottom filling; ADR - FL/AT; classification code - 1302, 1203. Gjdpfxsv R Uwmj Af Teui 5 chambers 1st - 10 000 ltr 2nd - 2 000 ltr 3rd - 5 000 ltr 4th - 8 000 ltr 5th - 10 000 ltr

Condition: excellent (used), Year of construction: 1991, Available immediately 3 points 4 nossels Godpfxov E N R Dj Af Toui Crash lock 1/3 fold cd fold vibrator on feeder

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls Gjdpfx Asv E Rizof Tjui rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition In production, can be inspected at any time

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE Gujdpfsv Snixex Af Tji The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: good (used), 903 USED Bakery deck oven Miwe Ideal 15 m2. EXTERNAL DIMENSIONS (in cm): - width 255 - length 320 + 10 chimneys - height 234 BAKING CHAMBER DIMENSIONS (in cm): - width 182 - length 207 EQUIPMENT: - used gas or oil burner (can also be new) Guodpfx Afst D Rhwo Toi We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Year of construction: 2024, CNC lathe machine TCK 50A500 with slant bed, 12 positions turret, hydraulic chuck and tail-stock, chip conveyor, parts catcher - is perfect machine for your turning operations. You can choose it in standard set or add desired option. We can make it with GSK CNC system, Siemens or Fanuc as option Max. Swing over bed -560mm Max. Swing over bed -260mm Max. disc machining diameter - 400mm Max. turning length - 500mm Spindle end type A2-6 Spindle through hole diameter -66mm Bar diameter -55mm Hydraulic chuck -10 inches Spindle limit speed -3000rpm Tail-stock sleeve diameter -70mm Tail-stock sleeve inner hole taper Mohs 5# Tail-stock sleeve stroke -80mm Knife square size -25mm Main motor power -11kW Gujdpfxot Ef I Us Af Toi Machine net weight -3000 kg Dimensions (L×W×H) - 2700*2000*2000 mm Please contact us for more details. There are other CNC slant bed lathe machine, CNC flat bed lathe, milling machines,8 CNC milling machines, CNC turning and milling centers, band saws, CNC saws available per request

Condition: good (used), Saw blade PEHAKA HS-820/820 lenght: 10700 Guedpfx Aetxlz Nof Tji width: 67

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Godpfxez Rk Hro Af Toui Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Guodpjz Rk Hxjfx Af Tei Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.