Used Image Press for sale (14,253)

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Ledpfx Afjfim Dwstohi Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: good (used), Table size: 350 x 350 mm. Lodefm A Amspfx Aftehi

Condition: good (used), Press force: 200 tons Table: 1500x1000 mm Lhedpfx Ajgvz Hxoftji Motor: 45 kW Weight: 18,000 kg Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 9128, working width: 600 mm, total width: 800 mm, pressure: 6 bar, overall weight: 320 kg, compressed air connection: 6 bar, input current: 1 A, input frequency: 50 Hz, input voltage: 230 V, total height: 1,500 mm, total length: 1,000 mm, type of input current: AC, power: 0.15 kW (0.20 HP), Equipment: CE marking, VEIT BRISAY BRI-2390/211 Industrial Garment Ironing Press (2011) Professional Pneumatic Steam Ironing Press for Trousers, Denim & Garment Finishing The VEIT BRISAY BRI-2390/211 is a premium German-built industrial ironing press designed for high-quality garment finishing in demanding production environments. Manufactured by BRISAY Maschinen GmbH, part of the renowned VEIT Group, this machine combines pneumatic operation with steam-heated pressing technology to deliver consistent, professional pressing results. Lhjdpfx Afjzpax Astoi This machine was used in the former MASI JEANS factory for finishing denim garments and trousers before shipment. It remained in daily production until the factory closure and represents an excellent opportunity for garment manufacturers, laundries, textile finishing companies, or industrial pressing operations. The ergonomically designed foot-pedal operation allows fast, repeatable production while reducing operator fatigue. The shaped upper and lower bucks make the machine particularly suitable for pressing trouser tops, waist areas and similarly contoured garment sections. Technical Specifications Manufacturer: BRISAY Maschinen GmbH (VEIT Group), Germany Model: BRI-2390/211 Modification: 026 Machine Number: 9128 Year of Manufacture: 2011 Power Supply: 230 V, 50–60 Hz Electrical Power: 0.15 kW Current: 0.7 A Compressed Air: 0.6 MPa Steam Pressure: 0.45–0.60 MPa Condensate Pressure: Max. 0.05 MPa Weight: 320 kg Certification: CE marked Key Features • Premium German industrial quality from VEIT Group • Pneumatic foot-pedal operation • Steam-heated upper and lower padded pressing bucks • Designed for continuous production environments • Consistent pressing pressure for repeatable quality • Ergonomic operation for reduced operator fatigue • Heavy-duty industrial construction • Excellent choice for garment manufacturers and textile finishing facilities Typical Applications • Trouser top pressing • Denim garment finishing • Jeans production • Workwear finishing • Uniform production • Jacket and garment pressing • Textile finishing operations • Industrial laundries • Commercial garment processing Condition Previously used in professional garment manufacturing. The machine remained in production until the closure of the MASI JEANS factory and shows normal cosmetic wear consistent with industrial use. Overall condition is good, and inspection is welcome prior to purchase. Video available. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Heidelberg GTO 52 Year of manufacture: 1996 Lhjdpfjzpamgsx Aftei Powder spray dampening system Varn Kompac dampening system

Condition: new, Year of construction: 2026, The Cormak VP3000 gluing press is a solid and efficient machine that is ideal for the production of furniture, stairs and other wooden elements. Its steel construction guarantees durability and stability, and easy adjustment and fast movement of the pressure unit ensure comfort and precision of work. High-performance, fully adjustable hydraulic cylinders Powerful hydraulic cylinders provide high pressure, necessary for gluing even thick and hard materials. Full adjustment of the cylinders allows for precise adjustment of the pressure force to the needs. Hydraulic valves allow for maintaining constant pressure Hydraulic valves maintain constant pressure during the entire gluing process, which ensures an even and durable connection of the glued elements. Constant pressure is a guarantee of work safety and avoidance of material damage. Hydraulic pressure indicator as standard The machine is equipped with a hydraulic pressure indicator that allows for ongoing monitoring of the pressure force, which makes it easier to control the gluing process. Thanks to the indicator, you can precisely set and maintain the appropriate pressure, which translates into high quality gluing. Solid steel construction The steel construction guarantees that the device will last for many years, even after intensive use. Solid materials ensure stability and safety when working with the device. Easy adjustment of the pressure unit Thanks to the easy adjustment, you can quickly and precisely adjust the pressure force to different materials. This translates into better work results and greater versatility of the device. The lock allows you to maintain a constant pressure The pressure lock allows you to lock the set pressure force, which is particularly useful for repetitive tasks. Technical parameters Total height 2040 mm Lodpfswcy U Tsx Aftshi Total width 3000 mm Max. clamping height 1550 mm Min. distance between pressure units 240 mm Distance of the hole from the pressure unit 50 mm Pressure 6 x 2000 kg Dimensions 3030x450x660 mm Total weight 260 kg

Condition: used, Year of construction: 2019, machine/vehicle number: 26488, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, table width: 400 mm, table length: 500 mm, overall weight: 116 kg, Equipment: CE marking, Transmatic TS 5 PA Industrial Pneumatic Heat Transfer Press (2019) Professional Swing-Away Heat Transfer Press for Hotfix Rhinestones, Decorative Stone Application & Textile Branding The Transmatic TS 5 PA is a premium industrial pneumatic heat transfer press manufactured by Transmatic S.r.l., Italy, designed for continuous, high-volume garment decoration and textile finishing. This machine was used in the former MASI JEANS factory for applying hotfix rhinestones, decorative crystals, heat-applied embellishments, logos and transfers to denim garments and fashion apparel. Its pneumatic operation provides consistent pressure across every pressing cycle, ensuring repeatable production quality while minimizing operator fatigue. The machine is supplied as a complete professional workstation and includes interchangeable lower platens, allowing fast changeovers for different garment sizes and applications. Technical Specifications Manufacturer: Transmatic S.r.l. (Italy) Model: TS 5 PA Serial Number: 26488 Year of Manufacture: 2019 Voltage: 230 V Power: 2.2 kW Operation: Pneumatic (external compressed air required) Control System: Digital colour touchscreen Heating Control: Electronic temperature and time control Pressure Adjustment: Integrated pneumatic regulator with pressure gauge Safety: Emergency stop button and CE certified Included Equipment • Complete Transmatic TS 5 PA heat transfer press • Digital touchscreen control system • Standard lower platen • Additional interchangeable small platen for sleeves, pockets, labels and small logos • Integrated pneumatic pressure regulator • Work light • Complete workstation Key Features • Premium Italian industrial quality • Designed for continuous production environments • Previously used for applying hotfix rhinestones and decorative stones to denim garments • Pneumatic automatic closing system for perfectly repeatable pressure • Swing-away upper platen for safe, ergonomic operation • Digital touchscreen with programmable temperature, pressing time and production counter • Exceptionally low recorded usage of only 1,498 pressing cycles • Fast changeover using interchangeable lower platens • Heavy-duty industrial construction for long service life • Excellent choice for garment manufacturers, decorators and textile finishing companies Typical Applications • Hotfix rhinestone application • Crystal and decorative stone application • Fashion garment embellishment • Denim decoration • Heat transfer printing • DTF transfers • Vinyl heat transfers • Logo application • Patch attachment • Label application • Sportswear production • Workwear branding • Promotional apparel • Textile finishing Condition Previously used in professional garment manufacturing. The machine powered a dedicated production process for garment decoration until the closure of the MASI JEANS factory. Lhsdpfxjzn U A He Aftsi The digital touchscreen controller powers on and operates normally, and the production counter displays only 1,498 completed cycles. Overall cosmetic condition is very good with only minor signs of normal industrial use. Inspection is welcome prior to purchase. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Storage location: Nattheim. Ljdpfozd Hm Nex Aftehi

Condition: used, Year of construction: 1999, Amada Promecam HFB 2204 8-Axis Hydraulic Press Brake (1999), Capacity 2200kN, 4000mm Bed, Maximum Stroke 180mm, Stopping Time 80ms, Stopping Distance 9mm, Machine Weight 16000kg. S/No. HFBO 220 40 H990103 (1999). Country of Origin: France Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Lodpozn Urzjfx Aftohi Please Note: This lot is located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 3,915 h, Hydraulic baling press, model JM-125/75, manufactured in 2018. Designed for the pressing and compaction of ferrous scrap and other metallic waste, providing high productivity and optimal density of the resulting bales. Lhodpfx Afezdfzyjtji The machine is constructed with a high-strength steel structure and equipped with a high-performance hydraulic system, ensuring reliability and durability even under intensive working conditions. Main features: Type: Stationary hydraulic baling press Pressing force: 125 tons High-performance hydraulic system Designed for the processing of scrap and metallic waste Robust construction for continuous industrial use Easy access for maintenance and operation This press is an efficient solution for recycling centers, metal recyclers, and facilities dedicated to the management of industrial waste.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: Lsdpfezn N Ecox Aftshi o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: excellent (used), functionality: fully functional, Working width 3200 mm year of manufacture 1992 Ledpfx Afjypg Rmjtshi motor power 7 kW pressing time adjustment automatic opening emergency stop switch - pull cord

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Ledpfx Afjzn Ilnotjhi Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical data: - max. pressing force 160 t - max. ram stroke approx. 500 mm - average working speed approx. 92 mm/s - return speed 125 mm/s - installation height approx. 1000 mm - overhang to center of ram 360 mm - ram mounting pin 40 mm - table size 900 x 630 mm - table bore / through-hole 220 mm Lhsdpfxezn H Rvj Aftji - table height above floor 720 mm - oil capacity approx. 200 liters - drive 400 V / 17 kW - space requirement approx. W 1150 x H 3400 x D 1850 mm - weight approx. 7500 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Lhjdpfx Afezn Hl Tjtji We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, overall weight: 2,450 kg, HSM V-Press 1160 Plus vertical baler from 2018 with a very small number of hours worked (99 operating hours) and number of bale cycles worked (55) - almost new condition. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Lhsdpjzn Hltefx Aftei Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Machine weight 5750 kg Lhodpfszdf D Uox Aftei

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale Lhodpjza Rm Tefx Aftsi 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 26 kW (35.35 HP), pressing force: 230 t, stroke length: 470 mm, throat depth: 400 mm, clearance between the columns: 2,550 mm, total width: 3,750 mm, total height: 3,750 mm, overall weight: 16,200 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: DARLEY, Type: EHP-LS 230.31/25 Year of manufacture: 2003 Technical data Manufacturer: DARLEY Type: EHP-LS 230.31/25 Year of manufacture: 2003 Capacity: 230 t Usable length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 470 mm Installation height: 700 mm Upright overhang: 400 mm Motor power: 26 kW Oil tank capacity: 200 liters Ljdpfx Afozmi Hqetshi Weight: 16.3 t Dimensions: Width 3,750 mm x Depth 2,700 mm x Height 3,550 mm (plus 200 mm for the control arm) Equipment • Control system: Delem DA-66W • Automatic Wila/Trumpf tool clamping system + tool holders (top and bottom) • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • CNC-controlled crowning • Lazersafe safety light curtain (front) • Rear safety guard via door/grille • 2 adjustable support arms • • Tool set: Top tool: straight, H 158 mm, R3, 28°, 100 t/m, 3000 mm, segmented Top tool: slightly bent, H220 mm, R1, 86°, 2000 mm, segmented All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2008, tube diameter 40- 115 mm wall strength 6/4,5 mm bending angle max. ° bending radius max. 216 mm Lhedpjzmitqsfx Aftoi weight of the machine ca. 10 t dimensions of the machine ca. 4,0 x 1,8 x 1,5 m used mandrel bending machine in good condition - working time 90° 12 sec. (forward) - max moment 53,2 cm2 - bending height 1050 mm - Electrohydraulic drive - Automatic start - Foot and hand switch - Counter bearing running along - Rated pressure 250 bar / Operating pressure 200 bar

Condition: good (used), Code: 0448 Brand: KOLMAG - ITALY Model: PGP 80 Hydraulic cold press for panels, furniture, doors, joinery, composite materials and various: Technical data: Platens dimensions 2500 x 1100 mm N° 4 pistons Opening 310 mm Thrust 60 ton Motor 4 Hp Lhedpfjzmifgex Aftoi Overall dimensions mm 3100 x 1150 x 1780 h Weight kg 2200

Condition: excellent (used), CATALOG NUMBER 7992 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x6 pcs - Pneumatic vertical clamps: 2x6 pcs - Max length of glued elements: 3600mm - Max height of glued elements: 1500mm - Max thickness of glued elements: 130mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110mm - Weight: 1400kg Lhsdpezmgk Tofx Aftei ADVANTAGES – Two working zones – Gluing length 3600mm – Pneumatic actuators – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at 4.2 PLN/EUR exchange rate (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg Lhsdpfx Ajzmfvujftoi ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC Lsdpfxjzn Afvj Aftehi NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Year of construction: 2014, condition: used, High-speed rotary tablet press. With integrated safety systems. CHARACTERISTICS - WIP (wash in place) system - 900 working hours - Number of stations: 45 - Exchangeable turrets - Included turrets: EU-B; EU-D PRODUCTION - Single layer tablet output: 158,000 - 282,000 tablets/h - Tablet diameter: 14 mm - Tablet thickness: 8.5 mm - Pressure: 10,000 kg - Main pressure: 10,000 kg SIZE Ljdpfx Ajzn Abkjftshi - Footprint: 1,659 x 1,285 mm - Height: 2,044 (without hopper)/2,199 (with hopper) mm - Weight: 4,000 kg (approx)