Used Ima Combima for sale (138)

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Kdjdpjzmtkasfx Ahbeu Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Kodpfx Aoy Spclehbedu Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, machine/vehicle number: 008662, Position 1: Single Edgebanders IMA-NOVIMAT CONTOUR I/G80/790/R3 Position 2: Panel Return Systems IMA-NOVIMAT CONTOUR I/G80/790/R3 Kdsdpfxszmmtnj Ahbeu

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Kdsdswcx T Uspfx Ahbsu Main Electrospindle power: 9 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8

Condition: used, Year of construction: 1994, Storage location: Nattheim Kjdpewmm Nrofx Ahbsdu

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm Kodpfxjzug Afe Ahbsdu • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Kedpfxozuyprs Ahbedu Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats Ksdpfx Aozux Tishbsdu - IMA Wop software + office license

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Kdsdez Dtudopfx Ahbeu Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz Kodpfx Ahozuyi Eebsdu - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% Kjdezug Alopfx Ahbjdu • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) Kjdpfxor Ttflo Ahbsdu In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617 (2 x Kw 0,25) Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Kodpfx Aoyxl Siohbedu Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm Kdsdpfxszupibo Ahbju - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Kjdpfx Aeyk Tkvehbsdu Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 80,859 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-axis travel without edge banding: 6,000 mm X-axis travel with edge banding: 5,000 mm Y-axis travel: 1,300 mm Y-axis travel with main spindle + tool diameter 20 mm: 1,630 mm Y-axis travel with edge banding: 1,450 mm Clamping table: Dyna Poin BIMA 410 V Number of positions: 4 Edge banding unit: available Kodpjx Af Ivofx Ahbjdu Operating hours: 80,859 h

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Ksdpfx Aem Udfwjhbsdu Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Kodpfjtixpujx Ahbodu Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Kedpei Hn Srefx Ahbsdu Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Kdsdsltmnlepfx Ahbju Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) Kedpfxew A Ruqe Ahbodu OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Kdodpfx Ahow El Nhebeu

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Kdedpfx Aod Scydohbou Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Kdjdpsidqphjfx Ahbju Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 50028, functionality: fully functional, operating hours: 16,000 h, The machine has the following functions: 1. Pre-milling cutters. 2. All lamps are in working order. 3. One container. 4. It has saws that cut forward and backward. 5. It has milling cutters at the top and bottom. 6. It has a rounding cutter for shaping edges. 7. It has a cycling function for processing solid wood. 8. It has a cleaning unit. 9. It has two bottles for cleaning. Kdjdjz H I H Hjpfx Ahbsu