Used Iga 2008 for sale (1,935)

Condition: used, mileage: 314,353 km, power: 390 kW (530.25 HP), first registration: 12/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2022, brakes: retarder, color: green, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: 5 x Mercedes Benz 1853 Giga Space, all vehicles are identically equipped and have similar mileage. Vehicle 713, Registered: 12.12.2022, 314,353 km Vehicle 714, Registered: 12.12.2022, 363,463 km Vehicle 715, Registered: 12.12.2022, 354,845 km Vehicle 716, Registered: 12.12.2022, 392,406 km Vehicle 717, Registered: 12.12.2022, 342,134 km Individual price: €56,500.00 (net) Package price: all 5 €277,500.00 Mercedes Benz 1853 Giga Space (Vehicle 713) Registered: 12.12.2022 314,353 km STEYLELINE Permissible gross vehicle weight 18,000 kg Unladen weight 8,095 kg Payload 9,905 kg Engine 12,809 ccm 390 kW / 530 hp Euro 6, E, M, N MOT due 06/2027, Technical inspection due 12/2026 Overall length 6,308 mm Overall width 2,510 mm, Overall height 3,956 mm Giga Space Roof spoiler, side deflectors, sun visor Chrome bar with 2 x long-range headlights and rotating beacon Distance control cruise control with emergency braking assistant, lane keeping assist Leaf/air suspension Work lights behind the cab 2-circuit hydraulics for tipper & sliding floor Parking brake Batteries at the rear Tire size front 385/65R22.5 approx. 50/60%, rear 315/70R22.5 approx. 40/40% Step lighting on the 1st step Central locking with remote control Sleeper cab with 2 x bed Automatic climate control, auxiliary heater, integrated auxiliary air conditioning Ibjdpfxezi Iguo Apcjb Multi-function steering wheel ZF Intarder Fully automatic transmission Radio/CD/Radio Large screen with navigation 12-volt socket USB connection Refrigerator 2 x electric windows, mirrors, heated mirrors Price: €57,000.00 (net) All information without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, For sale is a used gearbox from our stock: • Manufacturer: ZF (No type plate available) • Model/Type: Duoplan 2K300 • Housing number / casting number: 4161 111 065 • Type plate: Not available (type identification based on casting number) • Condition: Used / untested Condition description: The gearbox is in visually flawless, very good condition. For logistical reasons, we unfortunately do not have the possibility to technically inspect the gearbox in-house. Therefore, the sale is expressly made in its current condition ("as is") as an untested item and with the exclusion of any warranty. Advantages & Service: • Immediately available from stock • Inspection on-site is possible at any time by prior arrangement • Quick loading with a forklift is no problem for us Ibedpfoy Tht Sox Apceb • We reserve the right to sell the item to another buyer.

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Iedpfx Aezn Iucjpcjbb Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: ready for operation (used), Year of construction: 2007, Additional Machine Details: Ibsdpfjza Ugdox Apceb Automatic buckles and roller Navigator control 1st unit : 6 motorized buckles Batch counter Noise hood Round Pile Feeder Till 230 meter per minute

Condition: used, functionality: fully functional, mileage: 957,923 km, first registration: 01/2014, fuel type: diesel, overall weight: 2,600 kg, Year of construction: 2014, Equipment: AdBlue, USB port, air conditioning, central locking, fog lights, fridge, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, soot filter, tachograph, tire pressure monitoring, trailer coupling, M.B. ACTROS 2545, 3-axle tractor unit with fifth wheel + 2-axle semi-trailer with fifth wheel. Ibsdpfx Apjzk D Ukocsb

Condition: used, mileage: 990,000 km, power: 390 kW (530.25 HP), first registration: 03/1998, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, emission class: euro2, Scania 144G First registration: 03.1998 Mileage: 1,075,000 km Ibjdpfx Apjzmcx Hjcjb V8 engine 6x4 Full steel chassis Chassis only Heavy-duty axle Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran German/English/…?…?… Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Ibsdpfxeziavuo Apcob Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: new, functionality: fully functional, Deutschmann Automation Unigate CL-PBDPV1 CL profibus. Complete PROFIBUS-DP-Slave interface Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s) DPV0 and DPV1 supported Isolated PROFIBUS interface with 9-pin. D-sub connector PROFIBUS address adjustable via rotary switch Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes) Good working condition. Please check out our other listings as well. Ibjdpfxsv N Ru Ej Apceb

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Isdpfx Asw Az E Tspcebb

Condition: used, Year of construction: 2010, VAT/margin: VAT qualifying Quantity: 4 Ijdpfex S Nwpjx Apcebb Mounting diameter: 15.00 Sectional width: 6.50

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,250 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables Ibsdpfod Exv Hox Apcob High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. APPLICATION AREAS • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Ibjdpep E Ehqjfx Apcjb Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Condition: good (used), Year of construction: 2001, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 160 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW i= 3.83, see photo of nameplate -Voltage: 380-500V Isdpfjrnuy Sox Apcebb -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimension: 860/700/H415 mm -Weight: 62 kg/pc.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: IntNr231640, LTA AC 3001 _E120 Infinitely variable fan speed control (0-10V in the 230V version) · Low energy consumption thanks to filter elements with minimal pressure loss and energy-efficient fans · Filtration stages for the separation of coolant mist · Mechanical solid particle filter Ibjdjzx Rt Nopfx Apcjb · Suitable for use with oil/emulsion mist · High-voltage generator with two pre-programmed voltage levels · Direct mounting on the machine is possible · Separation efficiency of up to 99% - Dimensions (L x W x H): 1130x625x610 mm - Weight: 135 kg Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: GA1/002357, functionality: fully functional, input voltage: 400 V, input current: 51 A, input frequency: 50 Hz, overall weight: 6,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Panel Saw Gabbiani Galaxy T 108 PR – 2005 Manufacturer: SCM Group Weight: 5,000 kg Condition: fully operational Ijdpfx Apsy R Svrjcebb Performed maintenance: Complete operational check Inspection of mechanical systems Inspection of electrical system General maintenance Professional machine suitable for industrial production. Available for testing.

Condition: new, functionality: fully functional, machine/vehicle number: WV1ZZZSYS9072213, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: red, gearing type: automatic, number of seats: 8, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, non-smoking vehicle, parking heater, power assisted steering, tire pressure monitoring, traction control, Vehicle conversion to an MTW (multi-purpose vehicle): Aluminum multi-purpose floor with aluminum checkered plate 6 individual seats in the passenger compartment Front warning lights LED Digital radio antenna for Tetra/GPS Adjustable radio loudspeaker Paint finish: bumpers and side protection strips in white Warning bar LED 1600mm with 17-button control panel in the superstructure console, gooseneck microphone Reading light on the passenger side Central electrical system including ambient lighting left, right and rear 2 storage boxes under the seats including securing straps MTW cladding with checkered plate up to window height and including wheel arches Center console between driver and passenger LEAB PowerAirBox B (230V) including 4m charging cable, automatic ejection and charger Sliding partition grille in the cargo area Folding table between the seat rows 2x 230V sockets outside 2x USB A and USB C in the center RWS reversing warning system Tie-down rails for securing cargo Step including removable center section at the rear and more Optional equipment: 2nd battery with battery monitoring Trailer coupling: fixed ball head Trailer stabilization program Audio-navigation system Discover Media (touchscreen, color display) Optional infotainment system with touchscreen color display 26 cm (10.4"), navigation system Equipment package: combination preparation Vehicle without cargo area partition, child safety lock electrically operated, heated rear window with wiper, windows in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, entry handle on B-pillar, roof lining, additional heater, rear wing doors with glazing, interior mirror with anti-glare function Exterior mirrors electrically adjustable and heated Battery and generator reinforced Driving Assistance Package Basic Intelligent Speed Assist including speed limiter Driving Assistance System: High beam assist (Light Assist) Chassis: damping and stabilizers reinforced, front and rear Climatic air conditioning (cab) with 2nd evaporator Storage package, storage: DIN compartment in front under the headliner, interior lights in the cab: reading light in front, additional evaporator Side marker lights Fog lights with integrated cornering light Smoker's package Rain sensor Rear view camera Hinges for rear doors with increased opening angle Heated windshield washer nozzles Headlights LED Daytime running lights LED Mud flaps front and rear Mud flaps front, mud flaps rear Seats in the cab: passenger seat comfort Seats in the cab: driver's seat comfort Iodpfx Apjzynmcocebb Auxiliary heater for continuous operation and fuel-powered auxiliary heating Sockets (12V connection) in the cab (4 pieces) Sockets (12V connection) in the cargo/passenger compartment (2 pieces) Tinted rear windows Preparation for all-round warning lights Additional heater and evaporator Additional heater

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users Ibedeyr E Ezepfx Apcsb - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: good (used), mileage: 391,093 km, power: 330 kW (448.67 HP), first registration: 04/2022, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 6,310 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, power mirror, soot filter, spoiler, General information Number of doors: 2 Cab: Gigaspace Technical information Number of cylinders: 6 Engine capacity: 12.809 cc Transmission Transmission: Mercedes-Benz, 12 gears, Automatic Axle configuration Make axles: Mercedes-Benz Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.807 kg Carrying capacity: 11.193 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6d Maintenance APK (MOT): tested until 05/2027 History Number of owners: 3 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank Ibjdpfeztxihox Apcjb - Armrest - Baggage cover - Car kit - Hydraulic - Low-noise - Particulate filter - Power take-off (PTO) - PTO - Radio - Radio, MP3 enabled - Remote central locking - Speed limiter - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: excellent (used), VETTER SP 16 rescue air cushion – designed for fire brigades and rescue services for evacuating people from heights. Equipment by the renowned German manufacturer Vetter (IDEX Corporation) – used globally by professional and volunteer fire services. --- 📊 Technical data: • Model: SP 16 • Type: rescue air cushion (Sprungkissen) • Standard: DIN 14151 Part 3 • Rescue height: up to approx. 16 m • Year of manufacture: 2011 • Manufacturer: Vetter GmbH – Made in Germany --- 🛠️ Condition: • used • complete • includes documentation (service logbook + manual) Iedpfsyxwrbex Apcsbb • latest service records visible in the logbook • normal signs of use --- 📦 Scope of delivery: • VETTER SP 16 rescue air cushion • documentation / inspection logbook (Prüfbuch) • user manual --- 🚒 Applications: • fire brigades (professional and volunteer) • rescue services • training and drills • securing facilities --- ⭐ Benefits: ✔ professional rescue equipment ✔ Vetter German quality ✔ high efficiency and safety ✔ complete documentation --- 🚚 Transport: Transport or personal collection possible Assistance with shipping arrangements provided

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Iodoz Aitpjpfx Apcjbb Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: used, Year of construction: 2008, Alzmetall AX 3/S Column Drilling Machine Column drilling machine, Alzmetall Type/Model: AX 3/S Condition: Used Year of manufacture: 2008 Technical data: Drilling capacity in steel E335: 40 mm Thread cutting in steel E335: M 24 Short spindle: MK 3 Overhang: 293 mm Surface area of the machine table: 515 x 360 mm Distance spindle-table min./max.: 117 / 701 mm Column diameter: 115 mm Spindle stroke: 120 mm Feed: manual Power: 1.0 / 1.6 kW Power 2: 1.45 / 1.9 kW Motor 1: 750 / 1500 rpm Motor 2: 1500 / 3000 rpm Spindle speed, Option 1: 80 - 1,125 rpm Ibjdpfszym U Sjx Apcjb Spindle speed, Option 2: 160 - 2,250 rpm Inquiry item: Shipping costs will be provided in a separate quote.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). Iedpfx Ajz A Iarepcobb -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Iodpfx Apjznmzbjcsbb

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Iodpfxezuz Aao Apcjbb

Condition: used, Year of construction: 2008, operating hours: 15,334 h, 2008 | Komatsu PC210LC-8 | Used Tracked Excavator | 15334 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 2 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Machine with 15000 hours of operation that needs good general maintenance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41146 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Iedpfoz Db Dtsx Apcsbb 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.