Used Iga 2008 for sale (1,906)

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen Nodefz Rd Uopfx Ahvskw -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Condition: good (used), Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic Nedjcgan Rspfx Ahvokw -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor Nkodpfx Ajxvpacshvow -Manufacturer: Beckhoff Neuigart, servo geared motor with brake -Motor: Beckhoff type: AM8022-0D11-0000 -Voltage: 400 V -Power: 0.59 kW -Speed: 8000 rpm -Transmission: Neugart type PLE080-040-SSSA3AE-Z9 -Shaft: Ø 20 x 35 mm -Protection class: IP54 -Brake: 11 W -Technical data: see photos, nameplate -Dimensions: 320/80/H100 mm -Weight: 4.2 kg

Condition: good (used), Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A Nkjdpehhfz Nsfx Ahvjw -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg Nodpfxed At R Ss Ahvjkw

Condition: used, Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter -different diameters -Material: HSS, SS, carbide, others -is only sold complete Nkjdpfob Iqgpsx Ahvew -Weight: 18 kg

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Manufacturer: Hoerbiger ORIGA, rodless pneumatic cylinder -Type: EU/4200 -Stroke: 1000 mm Nedpfxef R Iwqs Ahvskw -Drive: pneumatic -Price: per piece -Number: 2 piece -Dimensions: 1300/70/H100 mm -Weight. 7.7 kg/piece

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder Nedpfx Asdz U Thohvekw -Travel: 450 mm -Piston diameter: 25 mm -Dimensions: 40/40/H650 mm -Weight: 1.6 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm Njdpfx Aocktx Rehvskw -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm Nkodpfx Ahjdl U I Tevjw -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg Nkjdpfjvtpk Hjx Ahvjw

Condition: excellent (used), Linear drive, linear gearbox, lifting gearbox, spindle drive -unused: from warehouse clearance -Travel distance: 550 mm Nedpfsb A Sh Sjx Ahvskw -Motor mount: Ø 19 mm -Dimensions: 13/130/H1000 mm -Transport dimensions: 200/200/H1100 mm -Number: 3x linear bearings available -Price: per piece -Weight: 14 kg/piece

Condition: as good as new (ex-display), This type of semi-automatic machine allows the application of a removable self-adhesive protective film on delicate surfaces and is therefore particularly suitable for painting and panel packaging processes. The film is applied to the panel without debonding, the application of the film can be adjusted more or less long. Nsderu A Raepfx Ahvskw The machine is suitable for panel masking, to avoid overspry in painting, thus avoiding long and costly manual protection. Suitable for medium production or small batches. Useful working width 1300 mm.

Condition: new, Year of construction: 2019, Roller Polishing Machine – Viganò Mario SP 1200, CE Condition: Showroom (Never used) Njdswxah Sepfx Ahvekw Availability: Immediate The SP 1200 roller polishing machine is designed for polishing polyester and polyurethane paints, metals, marble, and similar materials on flat surfaces. The machine structure consists of a movable bed and a fixed head. The vertical movement (up/down) is motorized and slides on ball recirculating guideways, ensuring precision and smooth operation. The bed's bidirectional travel speed is controlled via inverter and adjusted using a potentiometer. The polishing time is set by a stroke counter. Polishing is performed by a roller mounted perpendicular to the feed direction, made up of high-quality cotton discs. The heavy-duty electro-welded steel frame guarantees excellent stability during operation. The machine can be equipped with a pneumatic abrasive paste application system using spray guns. Standard dimensions of the SP 1200 model: • 1200 x 3000 x H 200 mm

Condition: new, AUTOMATIC PANEL POLISHER - Viganò BRL 1200, CE Nsdpfxowxc Rvs Ahvjkw Condition: Showroom (never used) Availability: Immediate The automatic polisher model BRL 1200 is a modern, high-performance machine specifically designed for polishing flat surfaces coated with polyester or two-component polyurethane-based gloss finishes, among others. The machine features a sturdy metal frame and a wooden worktable with a useful working area of 1200 x 3000 mm, a working height of 900 mm, and a maximum thickness capacity of 200 mm. The polishing system consists of 6 sponge pads with orbital rotation combined with individual pad rotation. The machine performs an alternating movement with adjustable speed controlled by a potentiometer. The machine is mounted on a robust electro-welded steel base, ensuring great stability and delivering high-quality polishing in reduced processing time. The lifting, lowering, and translational movements run on ball-bearing guides and rails and are controlled by an inverter, while the lifting speed of the pads is fixed.

Condition: used, Technical details: welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Cooling mode AF Nksdpfx Ahsu Nwaxovjw New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: used, Technical details: welding current - continuous: 400 A protection class: IP21 total power requirement: 23,2 kVA kVA weight of the machine approx.: 128 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - E-welding and TIG - DC welding current - Cooling mode AF -control switching 2/4 cycle spot welding, stepless The following components have been replaced by NEW ones: -hose package 4.0 meters Nkodpeu Nwbiefx Ahvsw -ground clamp and ground cable 4,0 meter -pressure reducer *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm Njdpeu Nfp Iofx Ahvskw height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: welding current - continuous: 320 / 100 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - TIG welding with direct current - TIG welding with pulsed current - E-hand welding Control switchover 2/4 cycle spot welding, stepless New components like: -hose package 4,0 meter, water cooled -ground tongs and ground cable 4,0 meter -pressure reducer Nsdeu Nwa Sepfx Ahvokw -TIG welding torch ERGO 301 *

Condition: excellent (used), Complete Grinding Room for bandsaw blades Njdpfx Ajkx E Sdjhvokw

Condition: excellent (used), Year of construction: 1990, Universal Milling Machine Niigata 2 UMCN, year 1990 Travel X-axis: 720 mm Travel Y-axis: 340 mm Travel Z-axis: 450 mm Table size: 310 x 1370 mm Vertical spindle distance to table: 50 - 450 mm Feeds – longitudinal and cross: 20 - 800 mm/min Vertical feed range: 9 - 355 mm/min Rapid traverse longitudinal and cross: 3000 / 1375 mm/min Spindle taper: SK 50 Spindle speeds: 40 - 1750 rpm Total power requirement: 5.5 kW Machine weight: approx. 2.4 t Required space: approx. 1.9 x 2.0 x 1.5 m Nkjdpfex Dthaox Ahvsw - Robust / high-performance CNC universal milling machine - Including Fanuc OM control - Universal milling head - Automatic feeds in X/Z/Y axis - Central lubrication - Coolant system - Rotary table - Splash guard tray - Various holders

Condition: good (used), Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Nksdpfx Ajx Ivycohvew Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) Nedpfou Aa A Aox Ahvekw (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan mass spectrometer Thermo Finnigan GC/MS system Trace MS 2160 with Thermo Finnigan DSQ II Nkedevyd S Sjpfx Ahvow Description: Mass spectrometer Mass range up to m/z 1050 Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Data system: Xcalibur with NIST spectra library Split/splitless injector and PTV injector Direct sample inlet via push rod Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: refurbished (used), Year of construction: 1998, COSTA LEVIGATRICI 757 CC CC 350 , 2 bottom rollers + 2 top rollers Nkedpfjr I Atdex Ahvow