Used Hyundai 360 Lc for sale (148)

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER Itedpfex Trgcex Ahben OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning length: 1,073 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,100 mm, bar passage: 81 mm, total height: 1,960 mm, total length: 3,805 mm, total width: 2,100 mm, overall weight: 5,800 kg, Equipment: documentation/manual, Hyundai WIA SE2600LSY is a high-performance CNC turning centre equipped with a Y-axis and sub-spindle for complete machining of complex components in a single setup. The machine features a FANUC i-Series control, BMT55 live tooling with speeds up to 6,000 rpm, and a maximum turning diameter of 380 mm. It is equipped with a 10" main spindle and 6" sub-spindle, providing excellent flexibility for both turning and milling operations. Optional equipment included: Automatic tool setter 15 bar high-pressure coolant pump Chip conveyor with chip container Bar feeder interface Itsdpfjz Izngex Ahbsn Parts catcher Standard set of tool holders, including 2 + 2 live tool holders

Condition: excellent (used), functionality: fully functional, power: 203 kW (276.00 HP), overall weight: 20,100 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2019, operating hours: 14,695 h, Equipment: air conditioning, all wheel drive, cabin, centralized greasing system, differential lock, hydraulics, quick-change device, trailer coupling, Hyundai HL965/HySW/40 km/h/Air Conditioning/CSA • Manufacturer: Hyundai • Model: HL965 • Year of manufacture: 2019 • Operating hours: 14,695 h • Engine model: Cummins QSL9 • Power: 203 kW / 276 hp • All-wheel drive • Differential lock • ROPS/FOPS certified • Rear-view camera • 360° camera • Air-suspended driver's seat • Multifunction display • ESC (Electronic Stability Control) • Air conditioning • Window ventilation • Central lubrication system • High- and low-speed range • Max. travel speed: 40 km/h • Radio • Total weight: 20,100 kg • German machine • Immediately operational • This offer is non-binding and subject to change. Itedpfxjyq Rt Ie Ahbon - Subject to prior sale. - Errors and/or typographical mistakes excepted. - Sale is according to our General Terms and Conditions.

Condition: new, machine/vehicle number: 720251122014, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 6.185 kg Functional Generator capacity: 825 kVA Dimensions of cargo space: 481 x 195 x 250 cm CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Iodoxivr Eepfx Ahbjtn Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, machine/vehicle number: 20260303039, fuel type: diesel, motor manufacturer: Hyundai DP158LC, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 4.600 kg Functional Generator capacity: 510 kVA Dimensions of cargo space: 401 x 180 x 235 cm CE mark: yes Other information Fuel consumption: 72.9 Liter / Hour at 75% Load Generator: Leroy Somer TALA473B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Additional information Please contact Team DPX for more information = Additional options and accessories = Ijdpfsw Alurox Ahbotn - Battery - Control Panel - Steel canopy - Tank

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets Iodpfxjzd Dize Ahbetn • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: excellent (used), Year of construction: 2019, Vertical CNC lathe – 3 axes Brand: HYUNDAI WIA Type: LV 800 RM Year: 2019 (575 cutting hours) Ijdpfxez Iqlno Ahbstn CNC: FANUC 32iB + manual guide Specifications: Turning capabilities: Maximum swing diameter: 890 mm Maximum turning diameter: 800 mm Maximum turning height: 800 mm Horizontal travel: 440 mm Vertical travel: 800 mm C-axis: 360,000 positions 3-jaw hydraulic chuck: Diameter: 530 mm Rotation speed: 2000 rpm Main motor power: 37/30 kW Dimensions (width x depth x height): 2000 x 2877 x 3300 mm Weight: 11 tons Equipped with: 12-tool turret C-axis 0.001° Rotating tool spindles 7.5 kW, 3000 rpm Through-tool coolant supply 20 bar Renishaw Quickset Rotating tool holders: 3 x axial, 3 x radial Turning tool holders Set of chuck jaws Manual 3-jaw chuck, dia. 630 mm Chip conveyor

Condition: excellent (used), Year of construction: 2006, turning diameter: 250 mm, spindle bore: 90 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 320 mm, spindle motor power: 11 W, type of input current: three-phase, overall weight: 4,600 kg, Equipment: documentation/manual, HYUNDAI-KIA SKT 21 VM CNC VERTICAL LATHE CNC vertical turning center with an inverted spindle, C-axis, and driven tools. Technical data: Manufacturer: Hyundai-Kia Model: SKT 21 VM Machine type: CNC vertical lathe / vertical turning center CNC control: FANUC Max. turning diameter: approx. 250 mm Max. workpiece diameter: approx. 350 mm Chuck size: 8" Spindle nose: ASA 6 Spindle speed: up to 5,000 rpm Spindle motor power: 11 kW Spindle bore: approx. 90 mm Itsdpfezzvmmex Ahben Tool turret: 12 tool stations VDI 40 tooling system Driven tools C-axis Axis travel: X-axis travel: approx. 1,255 mm Z-axis travel: approx. 320 mm Rapid traverse: approx. 30 m/min Machine equipped with: C-axis driven tools 12-position tool turret hydraulic chuck coolant system chip conveyor FANUC CNC control

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis). Itjdpfxezd D Nuo Ahbon

Condition: excellent (used), functionality: fully functional, machine/vehicle number: HHIHHH02HB0000320, Year of construction: 2011, operating hours: 9,791 h, load capacity: 1,190 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, fork carriage width: 1,800 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 3,156 kg, Equipment: CE marking, UVV, fork extension, full service history, hydraulic fork positioner, lighting, pallet forks, retractable fork, sideshift, Hyundai 18L-7 forklift – 1.8 tons – Triplex mast – TDL hydraulic fork spreader Due to the renewal of our equipment fleet, we are offering for sale our Hyundai 18L-7 forklift. This machine belongs directly to our company and has been used in our workshop, with regular maintenance. FEATURES: • Year: 2011 • Hours: 9,791 h • Lifting capacity: 1,190 kg • Triplex mast • Lifting height: 4,700 mm • Forklift weight: 3,156 kg • Forks: 1,200 mm • Solid cushion tires Ijdpfjzz Iu Njx Ahbetn • Side shift • TDL hydraulic fork spreader • Fork extensions included • Front and rear lights • Turn signals • Rotating beacon • Windshield wipers MAINTENANCE AND DOCUMENTATION: • Forklift in very good working condition • Regular maintenance • Spark plugs replaced in November 2025 • Maintenance log available • Certificate of conformity provided The forklift is currently in our workshop and can be viewed and tested in operation by appointment. Additional photos and videos are available upon request. Delivery can be arranged depending on the destination. Price: €9,250 (excluding VAT) VAT is recoverable.

Condition: used, Year of construction: 2018, operating hours: 6,600 h, functionality: fully functional, Hyundai Wia E160A 2-axis CNC lathe Year: 2018 Fanuc I series control Max. turning diameter: 280 mm Max. turning length: 300 mm Spindle bore: 45 mm Chuck: 170 mm Ijdozz N Ikjpfx Ahbstn 12-tool turret Tool probe Tailstock Documentation Chip conveyor

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Itjdpjxdxhrefx Ahbjn Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, power: 165 kW (224.34 HP), gearing type: automatic, fuel type: diesel, overall weight: 20,000 kg, axle configuration: 4x4, first registration: 06/2013, operating hours: 2,234 h, total width: 2,550 mm, number of cylinders: 6, fuel: diesel, nominal power: 165 kW (224.34 HP), Equipment: Bluetooth, USB port, central locking, differential lock, Key Features Internal Reference: 26266M Chassis Number: HHK HLL 04L D00 000 37 Vehicle Model: HL 760-9A Wheel Loader / Swiss-Vehicle Vehicle Make: Hyundai Product Category: Wheel Loader Condition: Used Hours: 2234 Date of First Registration: 06/15/2013 Fuel Type: Diesel Engine Power: 225 Transmission Type: Fully Automatic Cylinders: 6 Cab Vehicle Equipment: Bluetooth, CD Player, Differential Lock, USB Interface, Central Locking Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x4 Axle 1: 23.5 R 25/15mm, Leaf Spring Suspension Axle 2: 23.5 R 25/15mm, Leaf Spring Suspension Number of Axles: 2 Itsdpfx Aez Hpkgshbjn Weights & Dimensions Gross Vehicle Weight: 20000 Vehicle Width: 2550

Condition: excellent (used), fuel type: diesel, color: yellow, General information Year of manufacture: 2015 Operating hours: 1.687 Technical information Itedpfxjzd Rg Te Ahbsn Track width: 23 cm Drive: Track Empty weight: 1.820 kg Functional Dimensions of cargo space: 384 x 100 x 230 cm Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: KR Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Auto / hydraulic quick coupler - Standard digging bucket = Remarks = Hyundai Robex 16-9 * Year of manufacture 2015 * 1,687 operating hours * Diesel drive * Hydraulic quick coupler * Includes 2 digging buckets 0.3 and 1 meter wide * Includes pallet forks * 1,820 kg own weight

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3425C 013, We will provide more detailed information about the equipment during a personal on-site visit, which we recommend. Itsdjzpwunopfx Ahben

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 610 mm, turning diameter: 300 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, bar passage: 81 mm, C-AXIS + Y-AXIS 2 + 2 motorized tools Ijdpfx Aex Hpnkehbjtn QUICK LOAD SERVO LNS III tool changer RECONDITIONED SPINDLE LINE

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 2,450 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 850 mm, table width: 950 mm, table length: 2,700 mm, overall weight: 23,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Itsdpoz H Nmbsfx Ahbsn

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,055 h, functionality: fully functional, turning length: 760 mm, turning diameter: 420 mm, spindle motor power: 37,000 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, overall weight: 6,900 kg, The Hyundai WIA L3000SY represents the flagship model in Hyundai WIA’s turning center lineup, designed for high precision machining, productivity, and long-term reliability. The machine is equipped with true direct-drive spindles (without belts), ensuring excellent torque transmission, high dynamic performance, and improved machining accuracy. Key technical features include: • Main spindle: 12” chuck with 37KW • Sub spindle: 6” chuck • True Direct Drive spindles (belt-free design for higher precision and reliability) • BMT65 turret with 24 positions and 12 driven tool stations • Driven tools: up to 5,000 rpm with 7.5 kW power • Through-tool coolant system – 15 bar • Gun coolant system • Digital scales for improved machining precision • Pneumatic part pusher through the sub-spindle, including part flushing with M code • Part catcher on both main and sub spindle • Part extraction conveyor • Bar feeder connection • Bore-Max bar capacity: Ø102 mm • Chip conveyor • Automatic Q-Setter tool measuring system • Latest generation FANUC control • Oil mist / emulsion extraction unit with the machine • Hainbuch main spindle chuck The machine was installed at the customer site in 2020 and has been used only lightly. The current owner is changing production profile, which is why the machine has become available. Itsdpfx Aoy T Iuishbjn This configuration offers an excellent opportunity to acquire a high-end multi-tasking turning center with very strong specifications and low operating hours. Machine has regular Maintenance done and machine is working! With box guide design – the most rigid solution used in turning centers.

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. Itsdpfxjz Nu I De Ahbjn WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: used, Equipment: air conditioning, Year of manufacture: 2019 Year of construction: 2019 Operating hours: 5.590 Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Digging depth: 5.25 m Ijdpfjy Nwz Djx Ahbetn

Year of construction: 2018, condition: ready for operation (used), A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, electronic handwheel, tool load monitoring (HWTM), central lubrication and hinge belt chip conveyor. Documentation available. Inspection by appointment possible. Iodpfx Aheznmx Tjbjtn

Condition: used, fuel type: diesel, Equipment: air conditioning, Year of construction: 2020 Operating hours: 5.710 Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Digging depth: 5.25 m Itsdezb Nanspfx Ahbon Bucket volume: 0.27 m^3

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 240 mm, travel distance Z-axis: 430 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, This complete automated production cell includes two Hyundai HIT-200C CNC lathes and a FANUC M-20iA industrial robot with a ROBOTOWER automatic loading and unloading system. Each lathe offers a maximum turning diameter of 340 mm and a maximum turning length of 420 mm. The complete cell is designed for automated serial production, especially for larger production batches. Contact us for further details regarding this production cell. • 2 x Hyundai HIT-200C CNC Lathes • Year of manufacture: 2003 • CNC control: Siemens Sinumerik • Maximum turning diameter: 340 mm • Maximum turning length: 420 mm • X-axis travel: 240 mm • Z-axis travel: 430 mm • Spindle nose: A2-8 Itedpfx Aoznm H Rohbsn • Spindle bore: 80 mm • Hydraulic chuck: 10" • Machine weight: approx. 4,500 kg each • Rigid and dimensionally stable construction • Capable of maintaining IT6 tolerance class Additional Equipment / Automation • FANUC M-20iA industrial robot, year 2014 • ROBOTOWER automatic loading and finished-part unloading station • Automatic handling of raw and finished parts • Set of robot grippers • Operating manuals • CE documentation • Complete production cell suitable for serial production, especially for batches of 500 parts or more • Robot and loading/unloading system in very good condition • LOSMA air filtration units (oil mist collectors) visible in the photos is not included in the offer Technical Specification Counter Spindle No Driven Tools No

Condition: used, functionality: fully functional, machine/vehicle number: HHKHFT23CK0000522, Year of construction: 2011, operating hours: 2,100 h, load capacity: 16,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: other, Equipment: air conditioning, cabin, front guard, head guard, lighting, We offer this used Hyundai 160D-9 forklift, year of construction 2011. Forklift is sellable without forks. Iedpjzhkxqjfx Ahbetn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Itsdpfow Dcdyox Ahben Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings