Used Hydraulic Piston for sale (16,423)

Condition: ready for operation (used), power: 2 kW (2.72 HP), empty load weight: 550 kg, total length: 800 mm, total height: 1,200 mm, Haco 220 x 4 mm (fixed) Capacity: 220 x 4 mm Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Isdpfxsxpghwj Afietn Work height: 890 mm Depht: 660 mm

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21319 Specifications: 2020 model Hydraulic rock splitter Itsdpfxsxcfnco Afien 600 bar 23.5 kg Hydraulic generator Weight for hammer Ready for delivery Description: We have a 2020 sp400 Hydraulic splitter w/ Air hammer, plumb bob and hydraulic generator for sale. Everything works as it should and has been used little. Ready for delivery Own weight: 23

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 120 mm Itodpexn Uyrjfx Afien Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left Iodpfxsxn Tx Hj Afiotn - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Hydraulic guillotine shears in working order, cutting 3000 x 6 mm / 1500 x 8 mm Itodpfx Aswh Slhefisn Price depends on the service required.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Trumpf TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm EQUIPMENT 2 bending aids Wila tool clamping system (top and bottom) 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors Itodpfxsxn Sume Afion 6-axis backgauge

Condition: good (used), Year of construction: 1993, functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Equipment and scope of delivery : . Iedpfx Afexn Sllsiotn Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: used, Year of construction: 2014, operating hours: 2,723 h, fuel type: diesel, Serial number: 8FDJF35 04xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21547 Specifications 2014 model 2723 Hours 36 kW 5040 kg Rated capacity 3500 kg Lifting height: 3000 mm Iedpfx Asxpdmwjfijtn Queer first time Plexiglass glued to the door Services performed by approved personnel Tires (see pictures) Radio Climate Light Ready for delivery Description: We have a 2014 Toyota 02-8FDJF35 Forklift w/ Hydraulic Forks and Side Shift for sale. The forklift functions as it should according to the owner. However, errors and defects may be found. The front door is damaged (see pictures) Services have been taken by approved personnel. Ready for delivery Hours: 2723 Own weight: 5040 Lifting capacity: 3500 Kw: 36

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Itjdpfsxn Uy Ssx Afien Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Hydraulic pump, oil pump, gear pump -Pumps: are unused -Contents: approx. 20 l -Electric: 24 V 3 KW -Working pressure: 140 bar -Number: 13x pumps available -Price: per piece -Dimensions: 900/175/H210 mm Itsdpfx Ascgqdaofion -Weight: 24 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Hydraulic profile bending machine Fast delivery time, prior sale reserved Country of origin: Turkey In stock: 1 Shaft diameter: 60 mm Roller diameter: 177 mm Number of driven rolls: 3 Motor power: 3.7 kW Speed: 6 m/min Flat bar upright (section/min. diameter): 70x10 mm / 600 mm; 30x10 Flat bar horizontal (section/min. diameter): 90x25 mm / 500 mm; 50x5 mm Square steel (section/min. diameter): 40x40 mm / 500 mm; 20x20 Round steel (section/min. diameter): Ø 40 mm / 500 mm; Ø 20 mm Tube (section/min. diameter): Ø 60x2 mm / 600 mm; Ø 20x Iodpfxsxn Tbho Afijtn Formed tube upright (section/min. diameter): 80x40x3 mm Square tube (section/min. diameter): 60x60x4 mm External angle iron (section/min. diameter): 50x5 mm / 1,000 mm; 30x4 Internal angle iron (section/min. diameter): 50x5 mm / 500 mm; 30x3 mm Length: 1160 mm Width: 1000 mm Height: 1175 mm Weight: 1194 kg Demo machine / as-new condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 220 t, stroke length: 450 mm, working length: 4,250 mm, Equipment: foot remote control, TECHNICAL DETAILS Press force: 220 t Bending length: 4,250 mm Stroke: 450 mm MACHINE DETAILS Itedpfx Afjxn St Neijn Dimensions & Weight Space requirement: 5,000 × 3,000 × 3,000 mm Machine weight: 20 t Total power requirement: 54 kW EQUIPMENT 2 bending aids in front of the machine Parking area to the left for bending aids Light barrier in front of the machine 4 backgauge fingers Foot switch Including tooling

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Iedpfow Ecwcsx Afistn Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: used, Year of construction: 2021, operating hours: 272 h, fuel type: diesel, Serial number: F1BA0xxxx Please contact ATS Norway for more information Iedpexpdmkofx Afistn Please provide reference number upon request: 21549 Specifications: 2021 model 272 hours 85 kW 14500 kg Lifting capacity of 12000 kg Lifting height: 3000 mm Hydraulic forks Side shift Tires (see pictures) Radio Light Air conditioning/ac Ready for delivery     Description: We have a 021 Hangcha CPCD120 Forklift w/ hydraulic forks, side shift and low hours for sale. The truck is like new and has few hours. Everything works as it should and services have been taken care of. Ready for delivery Hours: 272 Own weight: 14500 Lifting heigth: 3000 Lifting capacity: 12000 Kw: 87 Model: CPCD120 Gaffeltruck m/ hydrauliske gafler, sideforskyvning og lite timer

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Iedpfx Afjxn Uxhjiotn Injection Moulding

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Ijdpfx Ashl Npqjfiotn Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., Itsdpfexabw Isx Afion but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Isdpfjxn Srxjx Afistn Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: used, Year of construction: 2010, Serial number: SKBE48S338KE1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18968 Specifications: - 2010 model - 3 axle Iedsvgz Auspfx Afistn - Tires (see pictures) - Hydraulic driving bridge - Width: 255 cm - Ready for delivery Description: Everything works as it should according to the previous owner. Ready for delivery Technical approved: Yes EU-approved until: 20.10.2025 Own weight: 9460 Total Weight: 48000 Payload: 38540 Width: 255 Length: 1340 Model: Maskinhenger m/ Hydraulisk kjørebru

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition Iodsgp T Euepfx Afijtn

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Itedpfxexabnas Afion Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t Iodpfx Afoxabcwsistn stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed Itjdpfx Afexaayheien * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed Itedpfx Ajxaar Djfion - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., Itodpfxjxaakge Afien but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions