Used Vitap Quartz for sale (25)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Kedpfx Ahexn Hzbo Noll Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: ready for operation (used), Year of construction: 2018, overall weight: 600 kg, This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Additional equipment • Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Kjdpfx Aeyap Troh Noll • Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system • PLC System: For setting the measurement and cutting of the edge with encoder reading • Laser: Facilitates cutting programming for closed pieces without the need to measure the piece • Piece Feeder: On/Off automatic piece feeder • Work Surface: For edging and trimming small pieces • Edge Magazine: Rolled edge magazine with idle roller system • Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ • Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces Machine Benefits Qualitative Machine Benefits • Facilitates efficient edging and trimming on both small and large pieces • Compliant with ce standards Technical Machine Benefits • Dimensions of machine (lxwxh): 2000 x 2000 x 1700 mm (with closed arms); 3400 x 3400 x 1700 mm (with arms open)

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Klsdpfxjwgb Hxs Ah Njl Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 3,600 rpm, spindle motor power: 5,000 W, number of axes: 3, This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information. Additional equipment • 20" LCD TFT monitor • Industrial PC Kledjx U Ub Sepfx Ah Nol • WSC user interface with Lister, parametric tools, and parametric setup • Graphical CAD programming TPA EDI32, basic version • USB port • Storage of all files • Macro programming • Import of DXF files • CE compliant Machine Benefits Qualitative Machine Benefits • A showroom machine never used Technical Machine Benefits • Feed speed: 25 m/min • Automatic 4-position tool changer • Max. Horizontal tool Ø: 12 mm • Max. Vertical tool Ø: 35 mm • Motor: 1. 7 kw • Number of independent vertical spindles: 12 // number of independent horizontal spindles on the x-axis: (2+2) • Max. Horizontal drilling depth on x and y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the y-axis: (2+2) • Electro spindle: 5 kw with iso30 taper (rpm 12000–24000) • Max. Workpiece dimensions: y 1250 mm, z 50 mm • Min. Workpiece dimensions: x 270 mm, y 150 mm, z 3 mm Extra Information Axes: 3 controlled axes (X, Y, Z) X-Axis: DDT feed system Y-Axis: Drilling head travel path Z-Axis: Drilling operations Optional Upgrades (at Additional Cost): Tool set for production startup Tool holder ISO 30 / ER 32 Lubricant cartridges PC with a more powerful processor Additional pneumatic upper pressure Free Nesting System Barcode scanner Post-processor for MPR files Office software license TPA Front and rear roller support Narrow part guides Optional clamp opening for 60 mm thickness Angle gear options CAD design software for furniture construction

Condition: like new (used), Year of construction: 2018, Number of independent vertical spindles: 8 Number of horizontal X-axis spindles: (2+2) No. of horizontal Y-axis spindles: (1+1) No. 1 blade for channel execution on the back of the cabinet: (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max panel weight: 25 kg Kodpsuxmvzsfx Ah Nell Max panel dimensions (see layout) : X ,Y 920, Z 50 mm Min panel dimensions: X 270,Y 150 (70 op.), Z 12mm Numbers of controlled axes: 3 Panel feed rate: 25m/min Spindle rotation: 3600 rpm Operating pressure: 7 bar Suction mouth diameter: ø 120 mm Suction rate: (2000 mc/hour) - (30 m/s) Max depth of all horizontal drilling in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max horizontal drill bit diameter: 12 mm Max vertical drill bit diameter: 35 mm Motor: 1.5 kw Dimensions: 2200x1350x1550 mm Weight: kg 715 CE standards

Condition: excellent (used), edge banding machine, very well maintained, works very well, the adhesive is on granules, year of manufacture 2014. ideal for a small space, has the following features. pre-milling, end cutting, top and bottom milling with radius, radius tickling, straight tickling Kledeyah S Topfx Ah Nsl

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding Kjdpfjw Ad Tmex Ah Nell manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: ready for operation (used), Year of construction: 2025, This VITAP GIOTTO edgebander manufactured in 2025 is designed for edge banding on straight, shaped, concave, and convex panels. It features a semi-automatic contour edge bander with a Teflon-coated glue pot, adjustable glue application, and an automatic roll cutting device. Ideal for handling large workpieces with its reinforced, swiveling arm and integrated vacuum. Consider the opportunity to buy this VITAP GIOTTO edgebander. Contact us for more information about this machine. Application Types Kedpfxsx E Ecbe Ah Njll Edge Banding

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, drilling depth: 70 mm, spindle speed (max.): 2,800 rpm, workpiece weight (max.): 380 kg, drill spindle length: 834 mm, pressure: 7 bar, Vitap Alfa 27T Multi-Spindle Drilling Machine Number of spindles: 27 Spindle pitch: 32 mm Distance between outermost spindles: 832 mm Drilling depth up to: 70 mm Turret adjustment for drilling depth Drilling possible vertical-horizontal-45° Two pneumatic material clamps Adjustable drilling speed Motor power: 1.85 kW Kledjxzzcaopfx Ah Nol CE certificate Technical documentation Year of manufacture: 2004

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Kjdpfx Ash Txmtoh Nell Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Kledpfx Ahet H Twye Nol

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. Kedpfsvx Dz Dsx Ah Nsll With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), Code: 0097 Brand: VITAP Model: ALFA 35 T - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1454 x 590 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Fence for 45 degrees frames Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1140 h Kljdowpw Dxspfx Ah Nol Weight kg 454

Condition: excellent (used), number of spindles: 35 pneumatic head inclination Kljdpfew U Aiiex Ah Nsl

Condition: ready for operation (used), Technical characteristics Semi-automatic 13-spindle multi-spindle drilling machine Distance between chucks : 32 mm Center distance between first and last chuck : 384 mm Max. drilling depth : 75 mm Spindle speed : 2800 rpm Cast-iron table 600 x 400 mm Max. workpiece dimensions : 600 x 3000 mm 1.5 hp motor 1 vertical pneumatic presser Cycle start with foot pedal Kljdpottdm Defx Ah Nel Operating pressure 6 bars Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2 Kw Motor: 1,5 CV Overall dimensions Lenght: 750 mm Width: 560 mm Height: 1200 mm Weight: 160 Kg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Ksdpstqq Hpsfx Ah Nell Overall dimensions Lenght: 1142 mm Width: 800 mm Height: 1140 mm Weight: 300 Kg

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Klsdpfx Aoiffpxjh Nol Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: excellent (used), Year of construction: 2018, I sell the multiple drilling machine with inserting Vitap Blitz Year: 2018 Number of drilling spindles 1 Number of inserting heads 1 Glue spraying with pump Programming CNC-driven X-axis Very good condition. Kledpfx Ahjwg Tyqj Nel Available immediately

Condition: excellent (used), bottom heads 2x 22 spindles side head 21 spindles spindles span 32mm Kjdpfxew Ad Taj Ah Noll 3 pneumatic clamps pneumatic setting of heads working dimensions 2400x1200mm

Condition: excellent (used), 21 spindles spindles right/left table dimensions 840x440mm Kledpfx Ahow Adygj Njl 2 pneumatic clamps spindles span 32mm pedal control pneumatic setting vertical/horizontal

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 601264, Technical specifications: -spindles 21 -center distance between spindles 32 mm -width of the drilling head 640 -maximum hole depth 70 -maximum dimensions of drilled parts 800x3000 -spindle revolutions per minute 2800 -motor power 2 kW Klsdpfxstrn Rys Ah Nol -normal pressure 6 - 8 bar -weight of machine 295 -machine size 1070x890x1240

Condition: new, Year of construction: 2020, Machine type K2 2.0, new machine, as new, the machine bears the CE label, automatic, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 150/1250 mm, working height 3/50 mm, working length 270/5000 mm, feed speed 25 m. per minute, motor size 5 kW, with 4 tool holders, tool mountings: ISO30, blade diameter 100 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm.. Kodpeh I Nd Sofx Ah Nsll +Machine is also bought with software for TPA codes +Licens for programming on external PC

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Klsdpoh Izk Uofx Ah Nel

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 510501 U, workpiece weight (max.): 25 kg, saw blade diameter: 100 mm, workpiece height (max.): 50 mm, drilling depth: 45 mm, saw blade speed: 7,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drilling and Milling Unit Number of independent vertical spindles: 8 Number of horizontal spindles on X-axis: 4 Number of horizontal spindles on Y-axis: 2 Saw blade unit – diameter: 100 mm Milling head: 3.6 kW, ISO 30 – 12,000/24,000 rpm Spindle speed: 3,600 rpm Saw blade speed: 7,000 rpm Maximum horizontal drilling depth (X and Y axis): 30 mm Maximum vertical drilling depth: 45 mm Maximum horizontal tool diameter: 12 mm Maximum vertical tool diameter: 35 mm Number of controlled axes: 3 Motor power: 1.5 kW Workpiece Maximum panel thickness: 50 mm Maximum panel weight: 25 kg Maximum panel size: X 1,100 mm, Y 50 mm Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm Panel feed speed: 25 m/min Control System Control: Fully parametric MACHINE DETAILS Electrical Data Rated voltage: 400 V Frequency: 50 Hz Rated current: 21.1 A Max. surge current: 0.018 kA Total power: 6.4 kW Compressed Air and Extraction Air pressure: 7 bar Kjdpow Dzm Tefx Ah Noll Extraction diameter: 140 mm Exhaust air volume: 2,000 m³/h – 30 m/s Maximum air consumption: 60 Nlt./min Dimensions & Weight Dimensions: 2,520 x 1,600 x 1,680 mm Weight: 900 kg

Condition: good (used), Vitap automatic through-hole drilling machine Klsdpsn Hq Snsfx Ah Nsl 4 lower heads 2 horizontal heads