Used Hydraulic Earth Drills for sale (19,562)

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Kedpfx Ahod Ab Rye Nsll Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Kedpfx Ahsmpfwdj Nell Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: smooth operation Spindle MK 3 Motor: 400 V, 0.55 kW Availability: approx. mid-April 2026 Storage location: Hesse Kledsyaddfspfx Ah Njl

Condition: used, Year of construction: 1980, sheet width 3,5 mm Kledpfxoyacpme Ah Nel cutting width 3050 mm weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1984, pressure 1000 t Klsdpfxsyacpas Ah Nel stroke 200 mm total power requirement 30 kW weight of the machine ca. 8 t multiple images available

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 3100 mm Ksdpfsyackwex Ah Nell 6 mm 0.5 - 3.5 ° 9,5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: used, Year of construction: 2024, gebraucht 2024 7319 prompt, Zwischenverkauf v Türkei 6900 € 1 120 to horizontal verschiebbar 400 mm 900 mm 1200 mm 5,8 mm/s 9.5 mm/s 1200 x 400 mm Kljdpfx Ahjwiqzdo Nsl 4 kW 1900 mm 1000 mm 2450 mm 1250 kg with horizontally sliding cylinder motorhydraulic with additional hand pump Height adjustable table Oil Pressure Gauge VERSION WITH HANDWHEEL AND LOCKING PIN CYLINDER ADJUSTMENT € 9.520,-- (stock no.: 7320) Option: 1 pair of V-block € 540,--

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm Kedpfx Aowiqyysh Nell 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Kledpfxsfbt Huj Ah Nol Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Kljdpfx Ajiv Irljh Nsl Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 Kledpfxon N Ekcj Ah Nel drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Kledpfx Ahelhwr Rs Nsl Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Kledpjqa Txqsfx Ah Nsl Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm Kedpeihmwtjfx Ah Noll pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Kljdpfjhik Ezox Ah Nol Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Kedpfx Aoharwvsh Nell Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Kledpfoxddwrjx Ah Nsl Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: good (used), Year of construction: 1999, Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine -Manufacturer: CUOGHI AFFILATRICI, drill grinding machine type APE60 with point thinning device -Drill chuck: up to Ø 60 mm -Grinding discs: Ø 200 x 45 x 32 -Coolant system: present -Accessories: incl. tools (see photo) Klodpjyab Syjfx Ah Njl -Dimensions: 860/880/H1300 mm -Weight: 275 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used 3 meter guillotine shear from Ermaksan Model: MGM 3100 8 Capacity: 3100 x 8 mm Refurbished electric backgauge Year of manufacture: 1998 Kledpfsyabqpox Ah Njl

Condition: reconditioned (used), Hydraulic hot press 25×13 Manufacturer: ORMA Model: 25×13 Klodpjycg Skjfx Ah Nol [Code: PRS-040] USED MACHINE – V380/50 Press plate dimensions: 2500×1300 mm Plate heating with hot water 4 cylinders Max pressing force: 70 TON Prepared for connection to centralized system NEW PLATES (coils + metal sheets)

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Kjden Armwepfx Ah Nsll Can be inspected and tested by appointment.

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg - Total length: 2072 mm - Width: 920 mm - Rotation: 360 degrees - Cutting power: 40 tons - Oil flow: 50-70 l/min - Oil pressure: 220 bar Klsdpfx Asx Hwblsh Nsl - Excavator weight: 18-24 tons

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Weight, approx.: 6400 kg Kjdotvfzcopfx Ah Njll

Condition: good (used), Table size: - horizontal: 500 x 600 mm Kljdjd Tticspfx Ah Nol - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214

Condition: new, Excavator class: 14.0 - 20.0 ton Weight: 1357 kg Beat rate: 350 - 650 bpm Working pressure: 150 - 170 kg/cm Oil volume flow: 90 - 120 l/min Kjdpfxslqakro Ah Nell Chisel diameter: 125 mm All models are supplied with a chisel, hose set and tool box.