Used Hydraulic Drawing Press for sale (38,167)

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Dlsdpfx Asx D H I Hob Tja Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: good (used), Karl Tranklein ZP Combi hydraulic bookbinding press The device is ready to work. The press has a built-in hydraulic unit. Djdpfx Abowxtd Tj Tela Two independent stations. A single station surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc. The machine is equipped with photocells, additional safety features.

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l Dljdpfjvuk T Eex Ab Tea power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from Dsdpfxefh R Nye Ab Tola regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Condition: not inspected (used), functionality: unexamined, pressing force: 100 t, table width: 460 mm, table length: 460 mm, type of input current: three-phase, travel distance Z-axis: 570 mm, pressure: 400 bar, input voltage: 400 V, 1 Hydraulic Press MUNARRIZ ; Maximum pressure: 400 bar Table dimensions: 460 x 460 mm Presser diameter: 180 mm Cylinder diameter: 180 mm Approximate vertical stroke: 570 mm Manual drive Hydraulic pump IHBER; YOM: 2024 Included a J.ANGEL BACAICOA weightless manipulator Power of the pump motor: 15 kW Dledpfxext Hzfs Ab Tsa Dimensions: 2900 x 2300 x 3000 mm Approximate weight: 1500 kg The machine has been working until May of 2025. Actually is dismounted and can not be tested. No warranty. The machine was reformed on 2024. All the hydraulic group was replaced by a new by the company IBHER in 2024 If the potential purchaser wants to see the machine operating this has a cost of 1.500 Euros ( Taxes not included )

Condition: excellent (used), I sell a Lukas baler in very good condition. Dedpfxjum Htze Ab Tsla

Year of construction: 2008, operating hours: 2,008 h, condition: ready for operation (used), General Data Machine weight 15000 kg Dlsdpfx Absx D Smzo Toa This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. Application Types Bending

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Djdpfx Aex Ehnweb Tela

Condition: used, Year of construction: 1977, pressure 250 t Dledpfx Aevuk Trob Tsa distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Dlsdpfx Absx Ehmyo Toa

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 630 t, table width: 1,800 mm, table length: 1,600 mm, overall weight: 80,000 kg, Equipment: safety light barrier, Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Dljdpsv E N Rqjfx Ab Tea Possibility to check the machine in operation - The press is still connected to the power supply. Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Dsdpfsudph Iex Ab Tjla

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 625 Dledpsx D Sm Isfx Ab Tea This TOX MAG 008.261.A.001 was manufactured in 2012. A robust hydraulic press with a maximum pressing force of 85 kN and a total stroke of 150mm. It operates with a minimal power requirement of 0.3 kW and can handle upper tool weights up to 100kg. Ideal for operations requiring precise pressing with moderate power. Contact us for more information about this machine. Application Types Bending

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t Dedsx Ehl Aspfx Ab Tjla

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t Dljdpfjvzxrpsx Ab Tea dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: repair required (used), Year of construction: 1972, functionality: limited functionality, machine/vehicle number: 611, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Dsdpfsx Ehlcjx Ab Tjla

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 6,000 mm, installation height: 1,000 mm, total width: 2,400 mm, total length: 3,500 mm, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 45,000 kg, oil tank capacity: 1,200 l, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of Delivery & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roll stand / support console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Condition of the Machine - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electricals in good condition - Mechanically sound, no visible damage - The machine is assembled and can be demonstrated under power. Press Force: Dlsdpfxjx D Tv Ds Ab Tsa - Rated force: 500 t - Max press force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions (approx.): 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Internal column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots (mounting defined by the customer) Hydraulic System: Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Control: - SIEMENS S7-1200 + ET200S - 12" touch panel Schneider Electric Operating Modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep drawing mode with die cushion Measurement & Safety Features: - Linear measurement system Novatechnik (63 Bit) for slide and die cushion - SICK safety light curtains front and rear (height: 1050 mm) - Side safety fencing with limit switches - Remote maintenance via Ethernet possible - Mobile operator panel International Notice Block (DE/EN) German: Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Condition: used, Year of construction: 1968, pressure 40 t throat 200 mm Dlodpfeu Dn Shex Ab Tea stroke 150 mm table surface area 600 x 300 mm hole in the table Dm. 140 mm ram surface 600 x 300 mm dayligth ca. 325 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SIEMENS Dodpfx Aox D Rx Neb Tola Model SIMATIC OP7 This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Application Types Stamping

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Dljdpfxex Ehlis Ab Toa Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t Dledpfx Aevzxrcsb Tja dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Dlsdpfxsx D Rlij Ab Toa Application Types Bending

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t Dsdpfx Ajvzxq Seb Tsla dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm Djdpfx Abovuufxj Tsla table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm Dedovut Tbopfx Ab Tola drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation