Used Hurco Vmx 42 T for sale (163)

Condition: good (used), Year of construction: 2022, functionality: fully functional, Hurco TM 8 MI turning-milling center, Djdpfx Aezg E E Asilscn year of manufacture 2022, Winmax Lathe control system, travel range X/Z 203/550 mm, 12-station turret, VDI 30, spindle speed up to 4,000 rpm, C-axis, driven tools, chip conveyor, bar capacity up to 65 mm.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Dodpfjx N E H Uox Ailscn Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, number of axes: 3, This 3-axis Hurco VMX 24 vertical machining centre was manufactured in 2001. It features X, Y, and Z travels of 610 mm each and a tool holder sk40. If you are looking to get high quality milling capabilities consider the Hurco VMX 24 machine we have for sale. Contact us for more information. • Spindle hours: 6,540 hours • New spindle was fitted in April 2021 • Chip conveyor is located within the working area • The axes were re-measured during the installation of the new spindle and found to be in order Dcjdpjzvl Snefx Ailsn Optional Equipment • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 31 h, travel distance X-axis: 285 mm, travel distance Z-axis: 560 mm, number of axes: 4, This 4-axis Hurco TMX8MYS was manufactured in 2014. It features a tool turret and includes a main spindle chuck, sub-spindle chuck, and parts catcher. With a robust design, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Hurco TMX8MYS turn-mill centre we have for sale. Contact us for further details. - AC Voltage: 400 V (3 Phase)- Frequency: 50 Hz- Full Load: 53 KVA- Largest Motor: 28 KVA- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 5 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Max Volts: 400 V- Inventory / Asset Number: Inv.-Nr.: 441007- Machine Power-On Time: 31h : 31m : 2s- Main Spindle Operating Time: 0h : 10m : 28s- Driven Spindle Operating Time: 0h : 0m : 25s- Counter Spindle Operating Time: 0h : 0m : 0s- Additional Equipment: Tool turret, main spindle chuck, sub-spindle chuck, parts catcher, driven tools Technical Specification Counter Spindle Yes Dodpfjz Hy Hlox Ailocn Driven Tools Yes

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Dcodpfx Ajudb I Teilen

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Dodpfszvd U Uex Ailocn For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm Dedpfoygmtvsx Ailscn • Tool turret: 24 positions Additional equipment • Various tools • Chip evacuator Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 X-axis Travel 1270 mm Y-axis Travel 650 mm Dcodpfxszt R Ive Ailen Z-axis Travel 610 mm Max spindle speed 16000 rpm Full technical specifications in the attached document. Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2000, functionality: not functional, Hurco VMX 50 machining center with Ultimax control IKZ chip conveyor Dedpfst H I Ugsx Ailecn

Condition: excellent (used), Year of construction: 2007, Hurco machining center VMX 24 condition see pictures Dedpev Nzuiofx Ailecn

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Dedpfx Aijv Nzucslecn

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Tool turret 24 positions Dcjdpfxsyi Ekxo Ailon • Equipment various tools • Accessories chip evacuator

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: ULTIMAX4 DSM Table size: 762 x 510 mm Max. table load: 1350 kgs X-travel: 610 mm Y-travel: 510 mm Z-travel: 610 mm Spindle speed: 10000 rpm Spindle taper: SK40 Tool magazine: 24-station Drive power: 11 / 9.4 kW Djdpfezuphqsx Ailscn Power requirement: 400V, 32A Weight: 4300 kgs Dimensions (LxWxH): 2350 x 2600 x 2700 mm Accessories, equipment: - Software options: DXF, 3D, Pocket/Islands, Ultinet (network card), Ramp/Helical, rigid tapping - Chip auger - Coolant tank - Signal lamp - Machine mounts - Electrical MPG - Manuals in PDF Description:The machine is in good condition and operates precisely. It is being sold due to a new equipment acquisition.Please note that the machine must remain in operation until mid-to-late September.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm Dodoydqpispfx Ailscn spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Dedpfxezbmzvs Ailscn Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Dsdpfxjzka Hio Ailjcn Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar Dedpfx Ajx Iikbsilocn - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Dsdpjzy Iknsfx Ailecn Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control Dcedpfxoxu Ikqo Ailjn BT 40 spindle, new in 2020 speed 10,000 rpm travels 1270X660X640 mm 24-tool changer chip conveyor

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible. Dcsdpouzyafefx Ailen

Condition: ready for operation (used), Year of construction: 2006, Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y/Z: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement. Dcsdpfx Aijzkvmfslsn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots Dcedpszzlu Tofx Ailon 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Door opening 1100 mm Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Dcedpex D A Ddofx Ailon

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Dedpfx Ajz Ei Amjilscn Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: excellent (used), Year of construction: 2014, Controller WIMNAX V09 (DSM) Table size 2184 x 865 mm T-slots in table 7 x 18 x 125 mm Table load max. 2268 kgs X travel 2134 mm Y travel 864 mm Z travel 762 mm Spindle speed 12000 rpm Spindle power 18 kW Tool holder type SK40 ATC magazin 40-fold Max tool dia. 74.9 mm Max tool length 300 mm Max tool weight 7 kgs Rapid speeds X/Y/Z = 18, 18, 13.5 m/min Weight 17000 kgs Dimensions LxWxH = 7570 x 4450 x 3260 mm Accessories, features Dcodpfx Aiepiaqxjlon - Coolant device - DXF, NCPP, ISNC, Herical, rigid tapping, pocket/islands options - CTS 20 bar - Spindle cooler - Chip conveyors - Manuals Very good condition. Ready to sale immediately. The tools are not in with the machine.